This document describes common terms related to forces and their effects as experienced by human bodies and their support surfaces. It provides further information on concepts around how these forces affect the human body's response to postural support systems, and particularly highlights the impact of the interface between tissues and postural support devices (PSD) on the maintenance of tissue integrity. It provides a general introduction to biomechanical concepts, phenomena, and vocabulary. This is intended to facilitate effective understanding and sharing of information between a range of disciplines/stakeholders involved in providing equipment to manage tissue integrity. Representative stakeholders include people with a disability, occupational therapists, physical therapists, biomedical engineers, nurses, medical and para medical personnel, device manufacturers, and other professionals facilitating development, provision, and access to seating and mobility equipment. This document does not provide detailed information that is currently available in physiological text books or scientific literature.

  • Technical specification
    12 pages
    English language
    sale 15% off
  • Draft
    12 pages
    English language
    sale 15% off
  • Draft
    12 pages
    English language
    sale 15% off

This document specifies requirements and test methods for lithium-ion batteries and battery systems intended for use in electrically powered wheelchairs, and their charging systems.

  • Standard
    10 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off

This document establishes requirements for reporting the cognitive accessibility of products and technologies, including: Assistive products, Assistive technologies, Consumer technologies, and Household appliances. This document is intended to increase access to a variety of products.
Designers can use this guidance along with any existing standards and accompanying test methods for their products.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60601-2-66:2019 is available as IEC 60601-2-66:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60601-2-66:2019 applies to the BASIC SAFETY of HEARING AIDS and HEARING AID SYSTEMS, hereafter also referred to as ME EQUIPMENT or ME SYSTEM. IEC 60601-2-66:2019 cancels and replaces the second edition published in 2015. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision of the definition about ESSENTIAL PERFORMANCE; b) revision of the application of IEC 60601-1-2:2014 for electromagnetic disturbances; c) correction of the used voltage for HEARING AIDS from 1,6 V to 4,5 V; d) correction of the drop test level from 1,5 m to 1,0 m; e) correction of the wording of IEC 60601-2-66:2015.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements and test methods for assistive products, considered to be medical devices, intended for use to alleviate or compensate for a disability.
This document does not apply to assistive products which achieve their intended purpose by administering pharmaceutical substances to the user.
NOTE 1    Assistive products are considered to be medical devices in some jurisdictions but not in others.
NOTE 2    Requirements and test methods for particular types of assistive products are given in other International Standards, e.g. see Reference [33].
NOTE 3    Not all the items listed in ISO 9999 are medical devices. Contracting parties might wish to consider if this document or specific clauses or subclauses can be used for assistive products that are not medical devices.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a classification and terminology of assistive products, especially produced or generally available, for persons to optimize functioning and reduce disability.
Assistive products used by a person to optimize functioning and reduce disability, but which require the assistance of another person for their operation, are included in the classification.
The following items are specifically excluded from this document:
—    items used for the installation of assistive products;
—    solutions obtained by combinations of assistive products that are individually classified in this document;
—    medicines;
—    assistive products and instruments used exclusively by healthcare professionals or by teachers;
—    non-technical solutions, such as personal assistance, guide dogs or lip-reading;
—    implanted devices;
—    financial support.

  • Standard
    202 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    196 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements for reporting the cognitive accessibility of systems, including assistive products, assistive technologies, consumer technologies, and household appliances, according to the recommendations given in ISO 21801-1:2020.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements for reporting the cognitive accessibility of systems, including assistive products, assistive technologies, consumer technologies, and household appliances, according to the recommendations given in ISO 21801-1:2020.

  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    39 pages
    French language
    sale 15% off

TThis document specifies requirements and test methods for electrically powered wheelchairs, with a maximum speed not exceeding 20 km/h, intended to carry one person of mass not greater than 300 kg, including:
-   electrically powered scooters with three or more wheels,
-   manual wheelchairs with an add-on drive system,
-   handrim-activated power-assisted wheelchairs,
-   electrically powered stand-up wheelchairs,
-   balancing wheelchairs,
-   wheelchairs with a pivot drive wheel unit, and
-   assistant-guided wheelchairs.
This document does not apply to custom-made electrically powered wheelchairs or electrically powered wheelchairs intended for use in sports.
This document also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements and test methods for manual wheelchairs intended to carry one person of mass not greater than 250 kg, including:
—   stand-up manual wheelchairs, and
—   manual wheelchairs for showering and/or toileting.
This document does not apply to custom-made manual wheelchairs or manual wheelchairs intended for use in sports.
This document also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements for static, impact, and repetitive load strengths for postural support devices (PSDs) with associated attachment hardware intended for use with an undefined wheelchair seating system. It specifies the test methods for determining whether the minimum performance requirements have been met to release a product into use. It also specifies requirements for disclosure of the test results. Not all tests apply to all PSDs. This document is also applicable to other seating systems. The test methods can be used to verify the manufacturer’s claims that a product meets the requirements of this document. This document does not apply to PSDs that are designed to fail under certain static, dynamic, or repetitive loads. This document does not apply to the strength of PSDs under crash conditions in a motor vehicle. This document does not evaluate long-term useful life. NOTE 1 ISO 16840‑4 provides crash test methods and requirements for wheelchair seating systems when used as part of a wheelchair seat in a motor vehicle. NOTE 2 For user masses greater or less than those specified in this document, appropriate extrapolation of test apparatus dimensions, mounting point separation, forces, etc. can be carried out, and the test parameters noted in the test report. NOTE 3 Rigid surrogate test fixtures are utilized to provide a standardized test method, and consequently this document does not involve a test of a PSD on a particular wheelchair.

  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    42 pages
    French language
    sale 15% off

This document specifies requirements and test methods for lead-acid batteries and their chargers intended for use with electrically-powered wheelchairs and scooters. Requirements for chargers are applicable to those with a rated input voltage not greater than 250 V AC and a nominal output voltage not greater than 36 V.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    22 pages
    French language
    sale 15% off

1.1   This document deals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically operated stairlifts (chair, standing platform and wheelchair platform) affixed to a building structure, moving in an inclined plane and intended for use by persons with impaired mobility:
-   travelling over a stair or an accessible inclined surface;
-   intended for use by one person;
-   whose carriage is directly retained and guided by a guide rail or rails;
-   supported or sustained by rope (5.4.4), rack and pinion (5.4.5), chain (5.4.6), friction traction drive (5.4.7), and guided rope and ball (5.4.8).
1.2   This document identifies hazards as listed in Clause 4 which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer.
1.3   This document does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   handling of materials, the nature of which could lead to dangerous situations;
-   use of energy systems other than electricity;
-   hazards occurring during manufacture;
-   earthquakes, flooding, fire;
-   evacuation during a fire;
-   stairlifts for goods only;
-   concrete, hardcore, timber or other foundation or building arrangement;
-   design of anchorage bolts to the supporting structure.
NOTE   For the actual type of machinery, noise is not considered a significant nor relevant hazard.
1.4   This document is not applicable to power operated stairlifts which are manufactured before the date of publication of this document by CEN.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements and related test methods that are relevant to assistive products for tissue integrity (APTI) in the lying position in different application environments such as hospitals, home care and institutions. This document applies to the safety of APTI, which are intended to remain in situ during periods of lying, and to prevent and/or treat pressure injuries.
This document covers a range of different lying support surfaces intended to be used in combination with the appropriate support platform or as a whole integrated system.
This document also covers assistive products primarily intended for tissue integrity for changing a lying position and assistive products for maintaining a lying position.
This document does not apply to lying support surfaces used in combination with incubators.
This document addresses the combination of a full body support surface and an adjustable mattress support platform. It also covers safety and performance test methods to ensure protection against injuries to the user.
This document specifies requirements and test methods for APTI within the following classifications of ISO 9999:2016:
04 33 06 Assistive products for tissue integrity when lying down such as but not limited to:
— Mattresses and mattress overlays for pressure injury prevention;
— Mattress coverings for pressure injury prevention mattresses.
12 31 03 Assistive products for sliding and turning such as but not limited to:
Devices for changing position or direction of a person using sliding or turning techniques. The only products included are those intended to be used in a lying position and remain in situ as part of the lying support surface. They are the following:
— sliding products that glide one way and lock the other way;
— sheets and underlays in flexible materials with low friction;
— fabric sold by the metre, cut as required for repositioning use;
— powered turning product;
This excludes sliding boards unless the product is intended to be left in situ.
09 07 06 Positioning pillows, positioning cushions and positioning systems such as but not limited to:
— leg positioners,
— arm positioners, and
— multipurpose body positioners.
18 12 15 Bedding such as but not limited to:
— draw sheets.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements and test methods for electrically powered wheelchairs, with a maximum speed not exceeding 20 km/h, intended to carry one person of mass not less than 25 kg and not greater than 300 kg, including
- electrically powered scooters with three or more wheels,
- manual wheelchairs with an add-on electrically powered drive system,
- handrim-activated power-assisted wheelchairs,
- electrically powered stand-up wheelchairs,
- wheelchairs with a pivot drive wheel unit, and
- push-assist wheelchairs.
This document does not apply to balancing wheelchairs, custom-made electrically powered wheelchairs or electrically powered wheelchairs intended for use in sports.
This document also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60050-872:2022 gives the general terminology used to describe accessibility and terms that writers of standards need when writing and designing International Standards. It has the status of a horizontal publication in accordance with IEC Guide 108. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.

  • Standard
    33 pages
    English and French language
    sale 15% off

This document specifies requirements and test methods for manual wheelchairs intended to carry one person of mass not less than 25 kg and not greater than 250 kg, including
- stand-up manual wheelchairs, and
- manual wheelchairs whose intended use includes showering and/or toileting.
This document does not apply to custom-made manual wheelchairs, manual wheelchairs intended for use in sports, or manual wheelchairs intended only for showering and/or toileting.
This document also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a classification and terminology of assistive products, especially produced or
generally available, for persons to optimize functioning and reduce disability.
Assistive products used by a person to optimize functioning and reduce disability, but which require
the assistance of another person for their operation, are included in the classification.
The following items are specifically excluded from this document:
— items used for the installation of assistive products;
— solutions obtained by combinations of assistive products that are individually classified in this
document;
— medicines;
— assistive products and instruments used exclusively by healthcare professionals or by teachers;
— non-technical solutions, such as personal assistance, guide dogs or lip-reading;
— implanted devices;
— financial support.

  • Standard
    202 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    196 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements and test methods for assistive products for persons with a disability, which are medical devices according to the definition laid down in the EU Directive 93/42/EEC.
This European Standard does not apply to assistive products which achieve their intended purpose by administering pharmaceutical substances to the user.
Where other European Standards exist for particular types of assistive products then those standards apply. However, some of the requirements of this standard may still apply and may be considered in addition to those in other European standards.
NOTE   Not all the items listed in EN ISO 9999 are medical devices. Contracting parties may wish to consider if this standard or parts of this standard can be used for assistive products which are not medical devices as defined in the EU Directive 93/42/EEC.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements and related test methods that are relevant to assistive products for tissue integrity (APTI) in the lying position in different application environments such as hospitals, home care and institutions. This document applies to the safety of APTI that are intended to remain in situ during periods of lying, and to prevent and/or treat pressure injuries.
This document covers a range of different lying support surfaces intended to be used in combination with the appropriate support platform (adjustable included) or as a whole integrated system.
This document does not apply to medical beds.
This document also covers assistive products primarily intended for tissue integrity for changing a lying position and assistive products for maintaining a lying position.
This document does not apply to lying support surfaces used in combination with incubators or operating/surgical tables.
It also covers safety and performance test methods to ensure protection against injuries to the user.
This document addresses the combination of a full body support surface and an adjustable mattress support platform. It also covers safety and performance test methods to ensure protection against injuries to the user.
This document specifies requirements and test methods for APTI within the following classifications of ISO 9999:2022:
04 33 06 Assistive products for tissue integrity when lying down such as but not limited to
—    mattresses and mattress overlays for pressure injury prevention, and
—    mattress coverings for pressure injury prevention mattresses.
12 31 03 Assistive products for sliding and turning such as but not limited to the following:
Devices for changing position or direction of a person using sliding or turning techniques. The only products included are those intended to be used in a lying position and remain in situ as part of the lying support surface. They are the following:
—    sliding products that glide one way and lock the other way;
—    sheets and underlays in flexible materials with low friction;
—    fabric sold by the metre, cut as required for repositioning use;
—    powered turning product;
This excludes sliding boards unless the product is intended to be left in situ.
09 07 06 Positioning pillows, positioning cushions and positioning systems such as but not limited to
—    leg positioners,
—    arm positioners, and
—    multipurpose body positioners.
18 12 15 Bedding such as but not limited to
—    draw sheets.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies general requirements and related test methods that are relevant to assistive products for tissue integrity (APTI) in the lying position in different application environments such as hospitals, home care and institutions. This document applies to the safety of APTI that are intended to remain in situ during periods of lying, and to prevent and/or treat pressure injuries. This document covers a range of different lying support surfaces intended to be used in combination with the appropriate support platform (adjustable included) or as a whole integrated system. This document does not apply to medical beds. This document also covers assistive products primarily intended for tissue integrity for changing a lying position and assistive products for maintaining a lying position. This document does not apply to lying support surfaces used in combination with incubators or operating/surgical tables. It also covers safety and performance test methods to ensure protection against injuries to the user. This document addresses the combination of a full body support surface and an adjustable mattress support platform. It also covers safety and performance test methods to ensure protection against injuries to the user. This document specifies requirements and test methods for APTI within the following classifications of ISO 9999:2022: 04 33 06 Assistive products for tissue integrity when lying down such as but not limited to — mattresses and mattress overlays for pressure injury prevention, and — mattress coverings for pressure injury prevention mattresses. 12 31 03 Assistive products for sliding and turning such as but not limited to the following: Devices for changing position or direction of a person using sliding or turning techniques. The only products included are those intended to be used in a lying position and remain in situ as part of the lying support surface. They are the following: — sliding products that glide one way and lock the other way; — sheets and underlays in flexible materials with low friction; — fabric sold by the metre, cut as required for repositioning use; — powered turning product; This excludes sliding boards unless the product is intended to be left in situ. 09 07 06 Positioning pillows, positioning cushions and positioning systems such as but not limited to — leg positioners, — arm positioners, and — multipurpose body positioners. 18 12 15 Bedding such as but not limited to — draw sheets.

  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    40 pages
    French language
    sale 15% off
  • Draft
    37 pages
    English language
    sale 15% off
  • Draft
    37 pages
    English language
    sale 15% off
  • Draft
    40 pages
    French language
    sale 15% off

This document specifies general requirements and test methods for assistive products, considered to be medical devices, intended for use to alleviate or compensate for a disability. This document does not apply to assistive products which achieve their intended purpose by administering pharmaceutical substances to the user. NOTE 1 Assistive products are considered to be medical devices in some jurisdictions but not in others. NOTE 2 Requirements and test methods for particular types of assistive products are given in other International Standards, e.g. see Reference [33]. NOTE 3 Not all the items listed in ISO 9999 are medical devices. Contracting parties might wish to consider if this document or specific clauses or subclauses can be used for assistive products that are not medical devices.

  • Standard
    54 pages
    English language
    sale 15% off
  • Standard
    59 pages
    French language
    sale 15% off
  • Draft
    53 pages
    English language
    sale 15% off
  • Draft
    62 pages
    French language
    sale 15% off

This document specifies requirements and test methods for hoists and body-support units intended for the transfer of persons with disabilities. The document applies to the following products classified in ISO 9999:—[1].
—    12 36 03 Mobile hoists for transferring a person in sitting position with sling seats;
—    12 36 04 Mobile hoists for transferring a person in standing position;
—    12 36 06 Mobile hoists for transferring a person in sitting position with solid seats;
—    12 36 09 Mobile hoists for transferring a person in lying position;
—    12 36 12 Stationary hoists fixed to walls, floor or ceiling;
—    12 36 15 Stationary hoists fixed to, or mounted in or on, another product;
—    12 36 18 Stationary free-standing hoists;
—    12 36 21 Body-support units for hoists.
This document covers different types of mobile and stationary hoists. Some of the requirements and test methods are general and others are only valid for specific product types.
Annexes A, B and C provide general recommendations.
This document does not apply to devices that transport persons between two levels (floors) of a building.
It does not include methods for the determination of ageing or corrosion of such hoists and units.
It does not include methods to qualify individual units prior to use.
The requirements of this document are formulated with regard to the needs of both the persons being hoisted and the attendant using the hoist.
[1] Under preparation. Stage at the time of publication: ISO/FDIS 9999:2021.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a classification and terminology of assistive products, especially produced or generally available, for persons to optimize functioning and reduce disability. Assistive products used by a person to optimize functioning and reduce disability, but which require the assistance of another person for their operation, are included in the classification. The following items are specifically excluded from this document: — items used for the installation of assistive products; — solutions obtained by combinations of assistive products that are individually classified in this document; — medicines; — assistive products and instruments used exclusively by healthcare professionals or by teachers; — non-technical solutions, such as personal assistance, guide dogs or lip-reading; — implanted devices; — financial support.

  • Standard
    194 pages
    English language
    sale 15% off
  • Standard
    202 pages
    French language
    sale 15% off
  • Draft
    194 pages
    English language
    sale 15% off

This document provides guidance around best practices for cleaning, disinfecting, and caring for the polyurethane covers for assistive
products for tissue integrity when lying down (APTIs) where the covers are designed to protect the internal components of the APTI
from damage. Adherence to this guide will extend the operational life of the APTI and its tissue integrity performance.
This document gives guidance for cleaning and disinfecting by manual means only.
This document is not intended to give guidance related to the efficacy of the cleaning and disinfection procedures.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides guidance on the mapping of a set of user accessibility needs with the provisions of a particular standard, technical report, or set of guidelines. It provides both basic guidance that should be used for all user accessibility needs mapping and optional guidance that may be added to the basic guidance. User accessibility needs mapping is intended to help improve accessibility for all users and, in particular, for users with special needs that can be overlooked. User accessibility needs mapping is not intended to be used to evaluate or certify a given standard or set of guidelines.

  • Standard
    23 pages
    English language
    sale 15% off

This document gives information on the test methods necessary for the characterization of the physical properties of the most commonly used foams for the manufacture of APTIs.
This document addresses only the characterization and performance of foam materials used in APTIs. It does not address the design, construction method or other factors relating to the final clinical efficiency of the product

  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for determining the dissipation characteristics of simulated sensible perspiration exposure on seat cushions of a wheelchair under test conditions that simulate body loading on support surfaces with flat and contoured profiles. The test method is applicable to a wide variety of seat cushion materials and constructions that are used across the world. The test method is intended to determine how the cushion handles a liquid load. It is not intended to determine how the cushion responds to a continuous release of liquid or vapour. This document also specifies apparatus to measure dissipation characteristics (of perspiration) of seat cushions and the approach to be employed in measuring these characteristics. This document is applicable to seat cushions for wheelchairs that include a cushion cover. NOTE The significance of the dissipation characteristics of the seat cushion can be greatly affected by the clothing worn, for example a moisture wicking cover might not help the skin condition of the patient sitting in a wet adult diaper.

  • Standard
    8 pages
    English language
    sale 15% off

This document specifies strength requirements and test methods for wheelchair castor assemblies. The test methods include corrosion, abrasion and fatigue conditions. This document also specifies requirements for disclosure of test results. It is applicable to castor assemblies of or developed for use in occupant and to assistant-propelled manual wheelchairs and electrically powered wheelchairs. The test requirements are also applicable to wheelchair castor assemblies not necessarily associated or supplied with a wheelchair. Castor assemblies including those with anti-tip castor wheels that do not touch the ground during wheelchair travel are outside the scope of this document.

  • Standard
    12 pages
    English language
    sale 15% off

This part of IEC 60118 gives definitions for common hearing aid features such as noise reduction or feedback reduction, etc. Only acoustical inputs are considered. Binaural features are currently not covered in this document. In addition, measurement procedures are described to verify hearing aid features. The objective is not to evaluate the performance of features but to verify their existence and functionality.
Furthermore, definitions and procedures are kept as general as possible so that this document can be applied to various types of hearing aids, e.g. air conduction hearing aids or bone conduction hearing aids. To this end, the general definition for hearing aid of IEC 60118-0:2015 is adopted, and this document does not refer to any specific ear simulator or acoustic coupler but uses a general definition of a coupler. However, if a general view is not applicable or leads to unclear or complex wording, the situation for an air conduction hearing aid is considered, only. Nevertheless, in Clause 4, an explanation is given on how this document can be applied to hearing aids which do not use air conduction.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document lists the terminology and common test methods used by manufacturers and laboratories to quantify the performance of a foam material. It also and gives information to users or buyers of these products to make an educated assessment of the relevance of the physical characteristics between various products offered to them.
This document summarizes/gives information about the tests for
—    polyurethane foams – typically polyether (polyether polyurethane foam) or polyester based (polyester polyurethane foam) – produced by either slabstock (slabstock foam) or moulded foam process, and
—    latex foams produced by either the Dunlop process or Talalay process.
The physical properties addressed in this document are
a) resilience,
b) hysteresis,
c) support/SAG factor,
d) density,
e) hardness,
f) compression set,
g) tensile strength,
h) tear strength,
i) air flow/permeability,
j) resistance to fatigue, and
k) microbial resistance.
NOTE       The test methods presented in this document do not necessarily simulate conditions of use in practice. The use of resulting data is therefore restricted to a broad comparative assessment between different foam products.
This document addresses only the characterization and performance of foam materials used in APTIs. It does not address the design, construction method or other factors relating to the final clinical efficiency of the product.
Test methods for characterizing the physical properties of any coverings, or the effects of any coverings on the physical properties of the foams, are not addressed in this document.

  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides guidance around best practices for cleaning, disinfecting and caring for the polyurethane covers for assistive products for tissue integrity when lying down (APTIs) where the covers are designed to protect the internal components of the APTI from damage. Adherence to this guidance will extend the operational life of the APTI and its tissue integrity performance.
This document gives guidance for cleaning and disinfecting by manual means only.
This document is not intended to give guidance related to the efficacy of the cleaning and disinfection procedures.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies test methods, requirements and recommendations for wheelchairs intended for use as seats in motor vehicles related to design, performance, labelling, presale literature, user instructions and user warnings. This document is applicable to all manual and powered wheelchairs, including scooters, which, in addition to their primary function as wheeled mobility devices, are also likely to be used as forward-facing seats in motor vehicles by children and adults with a body mass equal to or greater than 12 kg. This document is applicable to complete wheelchairs, including a frame or powerbase and seating system. It is also applicable to wheelchairs equipped with additional components designed to facilitate conformity with one or more of the requirements of this document.

  • Standard
    91 pages
    English language
    sale 15% off
  • Standard
    94 pages
    French language
    sale 15% off
  • Draft
    92 pages
    English language
    sale 15% off

This document provides guidance around best practices for cleaning, disinfecting and caring for the polyurethane covers for assistive products for tissue integrity when lying down (APTIs) where the covers are designed to protect the internal components of the APTI from damage. Adherence to this guidance will extend the operational life of the APTI and its tissue integrity performance. This document gives guidance for cleaning and disinfecting by manual means only. This document is not intended to give guidance related to the efficacy of the cleaning and disinfection procedures.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    5 pages
    French language
    sale 15% off
  • Draft
    4 pages
    English language
    sale 15% off

This document specifies a range of requirements and recommendations for the elements of construction, building assemblies, components, fittings and products that relate to the design and constructional aspects of usability and accessibility of buildings, i.e. access to buildings, circulation within buildings, egress from buildings during normal conditions, and evacuation in the event of a fire.
This document also applies to the common spaces in multi-unit residential buildings. Recommendations regarding residential units are given in Annex A.
This document also contains provisions with respect to outdoor features directly concerned with access to a building or a group of buildings from a relevant site boundary, or between such a group of buildings within a common site. This document does not deal with elements of the external environment, such as public open spaces, whose function is self-contained and unrelated to the use of a specific building.
This document is applicable to new buildings and new work in existing buildings.
This document introduces the concept of ‘exceptional considerations for existing buildings’ for situations where it is exceptionally difficult to meet the requirements specified and, thus, impossible to provide full accessibility. By means of ‘exceptional considerations for existing buildings’, an acceptable, though restricted, level of accessibility is specified. An exceptional consideration for existing buildings is not to be applied in other situations or invoked in an unjustified manner, or as an excuse for not achieving a higher level of accessibility, where this is economically and/or technically feasible.
The dimensions stated in this document, relevant to the use of wheelchairs, are related to the footprint of commonly used wheelchair sizes and users as specified in ISOÂ 7176-5 and ISO/TRÂ 13570-2, 800Â mm wide and 1Â 300Â mm long.
This document is primarily written for adults with disabilities, but it includes some recommendations on specific accessibility needs of children.

  • Standard
    177 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    168 pages
    English language
    sale 15% off
  • Standard
    178 pages
    French language
    sale 15% off
  • Draft
    168 pages
    English language
    sale 15% off
  • Draft
    178 pages
    French language
    sale 15% off

This document specifies requirements and associated test methods for the power, and control systems of electrically powered wheelchairs and scooters. It sets safety and performance requirements that apply during normal use and some conditions of abuse and failure. It also specifies methods of measurement of the forces necessary to operate controls and sets limits on the forces needed for some operations. This document is applicable to electrically powered wheelchairs and scooters with a maximum speed no greater than 15 km/h intended to provide indoor and/or outdoor mobility for one disabled person whose mass lies in the range specified in ISO 7176-11.

  • Standard
    65 pages
    English language
    sale 15% off
  • Standard
    69 pages
    French language
    sale 15% off
  • Draft
    65 pages
    English language
    sale 15% off

This document specifies principles of cognitive accessibility within the area of daily time management.
This document gives guidelines for design application for features and functions known to increase the accessibility of products and systems used to support daily time management for people with cognitive impairment regardless of age.
This document does not provide test methods and specific instructions for measuring and reporting.
NOTE       ANSI/RESNA CA-1:2016 specifies features, measurement methods, and documentation for reporting the universal design specifications that support inclusion of individuals with cognitive impairment that might be applicable and beneficial to use for evaluating products and systems used to support daily time management.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC SRD 63219:2022 provides guidance for AAL service providers to design, procure, implement, and maintain AAL systems throughout their service life.
The objective is to ensure that AAL systems are designed, configured, and installed to meet the needs of the AAL user and the requirements from applicable industry standards and global regulations. Ultimately, however, users of this document are responsible for checking the applicable laws and regulations.
This document is intended for use by persons and organizations acting within an AAL service organization such as employees, contractors, and consultants and those working with external AAL technology vendors, as appropriate.
This document provides guidance on ensuring that AAL systems meet the needs of the AAL service user, in terms of safety, security, privacy, usability, accessibility, performance and interoperability.
This document provides guidance to supplement the AAL service organization's established policies and procedures.

  • Standard
    19 pages
    English language
    sale 15% off

This document applies to hearing aid fitting management (HAFM) services offered by hearing aid professionals (HAP) when providing benefit for their clients. The provision of hearing aids relies on the knowledge and practices of a hearing aid professional, to ensure the proper fitting and adequate service in the interest of the client with hearing loss.
This document specifies general processes of HAFM from the client profile to the follow-up through administering, organising and controlling hearing aid fitting through all stages. It also specifies important preconditions such as education, facilities and systems that are required to ensure proper services.
The focus of this document is the services offered to the majority of adult clients with hearing impairment. It is recognized that certain populations with hearing loss such as children, persons with other disabilities or persons with implantable devices can require services outside the scope of this document. This document generally applies to air conduction hearing aids and for the most part also to bone conduction devices.
Hearing loss can be a consequence of serious medical conditions. Hearing aid professionals are not in a position to diagnose or treat such conditions. When assisting clients seeking hearing rehabilitation without prior medical examination, hearing aid professionals are expected to be observant of symptoms of such conditions and refer to proper medical care.
Further to the main body of the document, which specifies the HAFM requirements and processes, several informative annexes are provided. Appropriate education of hearing aid professionals is vital for exercising HAFM. Annex A defines the competencies required for the HAFM processes. Annex B offers a recommended curriculum for the education of hearing aid professionals. Annex C is an example of an appropriate fitting room. Annex D gives guidance on the referral of clients for medical or other specialist examination and treatment. Annex E is a recommendation for important information to be exchanged with the client during the process of HAFM. Annex F is a comprehensive terminology list offering definitions of the most current terms related to HAFM.
It is the intention that these annexes be helpful to those who wish to deliver HAFM of the highest quality.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements and test methods of rollators being used as assistive products for walking with wheels, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer including marking and labelling.
The requirements and tests are based on every-day use of rollators as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes rollators specified for a user mass of no less than 35 kg.
This document is not applicable to rollators with horizontal forearm supports, classified as walking tables, for which ISO 11199-3 is applicable.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides recommended and other product type names and example pictures of product categories defined in ISO 9999, subclass 09 30, "Absorbing products to contain urine and faeces".

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the method and acceptance criteria for the dimensions for surface profile features and patterns for the surface of pedestrian paving units, used to convey information for visually impaired people. It applies to paving units made of concrete, clay and stone where the tactile profiles are monolithic with the unit.
It does not specify requirements for profile and dimensions of a single tactile paving profile but proposes ranges within which these dimensions should fall. Default dimensions are given which may be used in the absence of a national requirement.
This document proposes methods of measurement of profiles, light reflectance and colour but does not specify requirements for these characteristics. These properties will be decided by the designer taking into account the regulations, codes of practice, and guidance in the place of use of the units.
It does not specify material characteristics.

  • Technical specification
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements and test methods for walking frames used as assistive products for walking, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer, including marking and labelling.
The requirements and tests are based on everyday use of walking frames as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes walking frames specified for a user mass of no less than 35 kg.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the method of measurement and acceptance criteria for the dimensions for surface profile features and patterns for the surface of pedestrian paving units, used to convey information for visually impaired people. It applies to paving units made of concrete, clay and stone where the tactile profiles are monolithic with the unit.
The surface profiles are intended to be applied to units manufactured to EN 1338, EN 1339, EN 1341, and EN 1344 which can be square or rectangular as specified by the designer.
It does not specify dimensions of a single tactile paving layout or profile but proposes ranges within which these dimensions should fall. Default dimensions are given in the absence of a national requirement.
This document proposes methods of measurement of profiles, light reflectance and colour but does not specify requirements for these characteristics. These properties will be decided by the designer taking into account the regulations, codes of practice, and guidance in the place of use of the units.
It does not specify material characteristics.

  • Technical specification
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard specifies requirements and test methods only for hoists and body-support units
intended for the transfer of disabled persons as classified in ISO 9999:2002:
⎯ 12 36 03 Mobile hoists with sling seats
⎯ 12 36 04 Standing mobile hoists
⎯ 12 36 06 Mobile hoists with solid seats
⎯ 12 36 09 Hoist trolleys
⎯ 12 36 12 Stationary hoists fixed to the wall/walls, floor and/or ceiling
⎯ 12 36 15 Stationary hoists fixed to, mounted in or on another product
⎯ 12 36 18 Stationary free-standing hoists
⎯ 12 36 21 Body-support units for hoists
This International Standard does not apply to devices that transport persons between two levels (floors) of a
building.
It does not include methods for the determination of ageing or corrosion of such hoists and units.
The requirements of this International Standard are formulated with regard to the needs of both the disabled
persons being hoisted and the attendant using the hoist.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies apparatus, test methods, and disclosure requirements for characterization of wheelchair seat cushion immersion and envelopment properties using indenters instrumented with pressure sensors. This document expands the characterization of products intended to manage tissue integrity (ISO 16840‑2) and provides a standardized indenter for other wheelchair seating tests. It does not provide information specific to cushion performance for a particular individual user, nor is it intended to characterize envelopment or immersion under higher loading conditions, nor to assess the weight capacity of a cushion. This document includes a method that is specific to 220 mm and 255 mm indenters. Dimensions are provided for a 380 mm indenter to allow for extension of the method to larger patient simulation.

  • Standard
    15 pages
    English language
    sale 15% off
  • Draft
    15 pages
    English language
    sale 15% off

This document presents guidelines for the design and development of cognitively accessible systems, including products and services and built environments.
This document is relevant to mainstream systems as well as those designed specifically for people with disability.
Within the broad field of accessibility, this document is limited to guidance related to cognitive accessibility.
NOTE 1  It acknowledges, however, that diverse sensory perceptions can impact cognitive accessibility.
NOTE 2  While the following guidance in this document can benefit all users, it is included here because failure to follow it could lead to barriers that would prevent some potential users from being able to use the system at all.
This document is relevant to all types of systems. However, some particular recommendations can only be followed for some types of systems:
—     Some of the guidance is relevant to a fixed system (e.g. a non-computerized consumer product or a user manual);
—     Some of the guidance applies to systems containing some level of computer-based processing (e.g. a microwave oven or an ICT-system);
—     Some of the guidance applies to systems that use advanced computer processing that supports individualization (e.g. an application in a smart phone);
—     Some guidance applies to combinations of the above.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements for water-absorbent crosslinked polyacrylate in urine absorbing products.

  • Standard
    3 pages
    English language
    sale 15% off
  • Draft
    3 pages
    English language
    sale 15% off

This document specifies requirements and test methods for hoists and body-support units intended for the transfer of persons with disabilities. The document applies to the following products classified in ISO 9999:—[1]. — 12 36 03 Mobile hoists for transferring a person in sitting position with sling seats; — 12 36 04 Mobile hoists for transferring a person in standing position; — 12 36 06 Mobile hoists for transferring a person in sitting position with solid seats; — 12 36 09 Mobile hoists for transferring a person in lying position; — 12 36 12 Stationary hoists fixed to walls, floor or ceiling; — 12 36 15 Stationary hoists fixed to, or mounted in or on, another product; — 12 36 18 Stationary free-standing hoists; — 12 36 21 Body-support units for hoists. This document covers different types of mobile and stationary hoists. Some of the requirements and test methods are general and others are only valid for specific product types. Annexes A, B and C provide general recommendations. This document does not apply to devices that transport persons between two levels (floors) of a building. It does not include methods for the determination of ageing or corrosion of such hoists and units. It does not include methods to qualify individual units prior to use. The requirements of this document are formulated with regard to the needs of both the persons being hoisted and the attendant using the hoist. [1] Under preparation. Stage at the time of publication: ISO/FDIS 9999:2021.

  • Standard
    75 pages
    English language
    sale 15% off
  • Standard
    75 pages
    English language
    sale 15% off
  • Standard
    83 pages
    French language
    sale 15% off
  • Standard
    82 pages
    French language
    sale 15% off
  • Draft
    75 pages
    English language
    sale 15% off
  • Draft
    75 pages
    French language
    sale 15% off