This document specifies the most common nominal dimensions, in millimetres, of: — shape type 6: straight cup grinding wheel; — shape type 11: taper cup grinding wheel; — shape type 27: depressed centre wheel for grinding or grinding/cutting-off; — shape type 28: depressed centre grinding wheel, concave shape; — shape type 29: depressed centre grinding wheel, convex shape. These bonded abrasive products are intended to be used for deburring and fettling/snagging of any surface of a workpiece using hand-held grinding machines (angle grinder). In this application, the workpiece is fixed and the grinding machine is guided by the operator. This document does not specify limit deviations and run-out tolerances, which are given in ISO 13942.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This document specifies the most common nominal dimensions, in millimetres, of: — shape type 41: flat cutting-off wheel; — shape type 42: depressed centre cutting-off wheel. These bonded abrasive products are intended to be used for cutting‑off of any workpiece using stationary or mobile cutting-off machines, both manually and mechanically guided. In the application that is manually guided, the workpiece is firmly clamped or stabilized by its own weight. The cutting‑off wheel is guided by the operator and the workpiece is fixed, or vice versa. This document does not specify limit deviations and run‑out tolerances, which are given in ISO 13942.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

This document specifies the most common nominal dimensions, in millimetres, of: — shape type 41: flat cutting-off wheel; — shape type 42: depressed centre cutting-off wheel. These bonded abrasive products are intended to be used for cutting‑off of any workpiece using hand-held power tools (e.g. angle grinders and straight grinders). In this application, the workpiece is fixed and the hand-held power tool is guided by the operator. This document does not specify limit deviations and run‑out tolerances, which are given in ISO 13942.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

EN IEC 62841-3-5:2022 applies to band saws intended for cutting wood and analogous materials, plastics and metals, except magnesium. This document does not apply to transportable scroll saws and jig saws with a reciprocating blade. This document applies to band saws having a mass of: - maximum 25 kg for tools capable of being lifted by hand by one person; - maximum 50 kg for tools capable of being lifted by hand by two persons.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2020-12-24: Common mods to this prA1 are included in prAB (PR=73280) for simultaneous circulation
D164/C043: DOW= dor + 48 months

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2020-12-24: This prAB represents common mods to EN 62841-3-10:2015/prA1 (PR=73192) under parallel
D164/C043: DOW= dor + 48 months

  • Amendment
    8 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day

2020-12-14: This prAA represents common mods to EN IEC (PR=71053) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, which are relevant to stationary diamond wire saws (stationary diamond mono-wire saws and stationary diamond multi-wire saws), as defined in Clause 3.
Stationary diamond wire saws may be used in quarries or in sawmill for cutting natural stones (e.g. marble, granite), when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document deals only with stationary diamond wire saws using coated diamond wire as tool.
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals all significant hazards that may occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document does not deal with the significant hazards arising by the use of other facilities/devices not described in this document, that may be fitted on the machines or that may be used during the work cycle.
This document does not deal with:
a)   operation under extreme ambient conditions (outside the limits defined in EN 60204-1:2018);
b)   upstream and downstream conveying elements, not integrated with stationary diamond wire saws, for transporting of the work-pieces.
This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, which are relevant to transportable diamond wire saws and cutting operations as defined in Clause 3.
This document deals only with transportable diamond wire saws used in quarries for cutting natural stones (e.g. marble, granite), when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document deals only with transportable diamond wire saws using coated diamond wire as tool.
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals all significant hazards that may occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document does not deal with the significant hazards arising by the use of other facilities/devices not described in this document, that may be fitted on the machines or that may be used during the work cycle.
This document does not deal with:
a)   operation under extreme ambient conditions (outside the limits defined in EN 60204-1:2018);
b)   upstream and downstream conveying elements, not integrated with transportable diamond wire saws, for transporting of the work-pieces.
This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for jig and sabre saws.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for cut-off machines and wall chasers.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for determining and testing the grain size distribution of electro-fused aluminium oxide and silicon carbide macrogrit sizes P12 to P220 for coated abrasive products. It is applicable to grits used in the manufacture of coated abrasive products and to grits extracted from coated abrasive products for test purposes.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
  • Draft
    11 pages
    English language
    sale 15% off

This document specifies a method for determining and testing the grain size distribution of electro-fused aluminium oxide and silicon carbide microgrit sizes P240 to P5000 for coated abrasive products. It is applicable to grits used in the manufacture of coated abrasive products and to grits extracted from coated abrasive products for test purposes.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
  • Draft
    25 pages
    English language
    sale 15% off

This document specifies a reference dictionary for cutting items, together with their descriptive properties and domains of values. This document specifies a reference dictionary containing: — definitions and identifications of the classes of cutting items and their features, with an associated classification scheme; — definitions and identifications of the data element types that represent the properties of cutting items and their features; — definitions and identifications of domains of values for describing the above-mentioned data element types. The following are within the scope of this document: — standard data that represent the various classes of cutting items and cutting item features; — standard data that represent the various properties of cutting items and cutting item features; — standard data that represent domains of values used for properties of cutting items and cutting item features; — definitions of reference systems for cutting items and their properties; — one implementation method by which the standard data defined in this document can be exchanged. NOTE 1 The implementation method by which the standard data defined in this document can be exchanged is specified in ISO 10303-21. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — implementation methods other than the one defined in this document by which the standard data can be exchanged and referenced; — information model for cutting tools; — definitions of classes and properties for tool items; — definitions of classes and properties for adaptive items; — definitions of classes and properties for assembly items and auxiliary items. NOTE 2 The information model for cutting tools is defined in ISO 13399-1. NOTE 3 The definitions of classes and properties for tool items, adaptive items, assembly items, and auxiliary items are provided in ISO/TS 13399-3, ISO/TS 13399-4, and ISO/TS 13399-5, respectively.

  • Technical specification
    201 pages
    English language
    sale 15% off
  • Technical specification
    203 pages
    French language
    sale 15% off
  • Technical specification
    203 pages
    French language
    sale 15% off

This document specifies a reference dictionary for tool items, together with their descriptive properties and domains of values. This document specifies a reference dictionary containing: — definitions and identifications of the classes of tool items and their features, with an associated classification scheme; — definitions and identifications of the data element types that represents the properties of tool items and their features; — definitions and identifications of domains of values for describing the above-mentioned data element types. The following are within the scope of this document: — standard data that represent the various classes of tool items and tool item features; — standard data that represent the various properties of tool items and tool item features; — standard data that represent domains of values used for properties of tool items and tool item features; — definition of cutting operations; — definitions of reference systems for tool items and their properties; — one implementation method by which the standard data defined in this document can be exchanged. NOTE 1 The implementation method by which the standard data defined in this document can be exchanged is specified in ISO 10303-21. The following are outside the scope of this document: — specialized or expert knowledge in the design and use of cutting tools; — rules to determine what information should be communicated; — applications where these standard data can be stored or referenced; — implementation methods other than the one defined in this document by which the standard data can be exchanged and referenced; — information model for cutting tools; — definitions of classes and properties for cutting items; — definitions of classes and properties for adaptive items; — definitions of classes and properties for assembly items; — definitions of classes and properties for connection systems; — definitions of classes and properties for reference systems. NOTE 2 The information model for cutting tools is defined in ISO 13399-1. NOTE 3 The definitions of classes and properties for cutting items, adaptive items, and assembly items are provided in ISO/TS 13399-2, ISO/TS 13399-4, and ISO/TS 13399-5, respectively. NOTE 4 The definitions of classes and properties for connection systems and reference systems are provided in ISO/TS 13399-50.

  • Technical specification
    461 pages
    English language
    sale 15% off
  • Technical specification
    465 pages
    French language
    sale 15% off

This document specifies a reference dictionary for adaptive items, together with their descriptive properties and domains of values. This document specifies a reference dictionary containing: — definitions and identifications of the classes of adaptive items, with an associated classification scheme; — definitions and identifications of the data element types that represents the properties of adaptive items; — definitions and identifications of domains of values for describing the above-mentioned data element types. The following are within the scope of this document: — standard data that represent the various classes of adaptive items; — standard data that represent the various properties of adaptive items; — standard data that represent domains of values used for properties of adaptive items; — one implementation method by which the standard data defined in this document can be exchanged. NOTE 1 The implementation method by which the standard data defined in this document can be exchanged is specified in ISO 10303-21. The following are outside the scope of this document: — specialized or expert knowledge in the design and use of cutting tools; — rules to determine what information should be communicated; — applications where these standard data can be stored or referenced; — implementation methods other than the one defined in this document by which the standard data can be exchanged and referenced; — information model for cutting tools; — definitions of classes and properties for cutting items; — definitions of classes and properties for tool items; — definitions of classes and properties for assembly items; — definitions of classes and properties for connection systems; — definitions of classes and properties for reference systems. NOTE 2 The information model for cutting tools is defined in ISO 13399-1. NOTE 3 The definitions of classes and properties for cutting items, tool items, and assembly items are provided in ISO/TS 13399-2, ISO/TS 13399-3, and ISO/TS 13399-5. NOTE 4 The definitions of classes and properties for connection systems and reference systems are provided in ISO/TS 13399-50.

  • Technical specification
    199 pages
    English language
    sale 15% off
  • Technical specification
    200 pages
    French language
    sale 15% off

This document specifies the chemical analysis of silicon-carbide-based abrasive grains and crudes. It is applicable for the determination of the surface impurities of abrasives grains and the determination of the SiC content of crushed crude when the silicon carbide content is greater than 95 % (mass fraction).

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
  • Draft
    21 pages
    English language
    sale 15% off
  • Draft
    24 pages
    French language
    sale 15% off

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for transportable table saws.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for jointers.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for routers and trimmers.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for circular saws.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for planers.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is applicable for bonded abrasive products in general. NOTE 1 Bonded abrasive products are e.g. grinding wheels, segments, sticks and stones. This document specifies: a) ISO type number and shape; b) dimensional symbols; c) standard profiles; d) specification; e) designation; f) marking requirements. NOTE 2 This document is general and is complemented by ISO 603 (all parts) that is applicable for dimensions, by ISO 6103 that is applicable for permissible unbalance and by ISO 13942 that is applicable for limit deviations and tolerances. This document is not applicable for superabrasive products and coated abrasive products.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
  • Draft
    21 pages
    English language
    sale 15% off
  • Draft
    21 pages
    French language
    sale 15% off

This document is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the abrasive products.
This document also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
This document does not apply to superabrasive products and coated abrasive products.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN-ISO 19432-1 specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, internal combustion engine-driven cut-off machines intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable only to those machines designed purposely for use with a rotating, bonded-abrasive and/or super-abrasive (for example diamond) cut-off wheel having a maximum outer diameter of 430 mm, centre-mounted on and driven by a spindle shaft where the top of the wheel rotates away from the operator (see Figure 1).This document deals with all significant hazards, hazardous situations or hazardous events significant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. See Annex F for a list of significant hazards.This document specifies methods for the elimination or reduction of hazards arising from their use, as well as the type of information on safe working practices to be provided with the machines.Cut-off wheel specifications are not considered in this document. Cut-off wheels are deemed to comply to existing cut-off wheel standards.All through the document, portable, hand-held, internal combustion engine-driven cut-off machines are called “cut-off machines”.This document is not applicable to machines manufactured before the date of its publication.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is applicable to rotating bonded abrasive products. It specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the abrasive products.
This document also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
This document does not apply to superabrasive products and coated abrasive products.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to superabrasives products containing natural or synthetic diamond or cBN (cubic boron nitride). It includes precision grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels.
This document specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the superabrasive products.
This document contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use, which will be made available to the user by the manufacturer.
This document does not apply to bonded abrasive products, coated abrasive products, rotating dressing tools, truers or any non-rotating superabrasive products.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard only applies to superabrasives products containing natural or synthetic diamond or cBN (cubic boron nitride). It includes precision grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels.
This European Standard specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the superabrasive products.
This European Standard contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use which is to be made available to the user by the manufacturer.
The hazards taken into consideration are listed in Clause 4.
This European Standard does not apply to bonded abrasive products, coated abrasive products, rotating dressing tools, truers nor any non-rotating superabrasive products.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62841-3-12:2017 applies to transportable threading machines. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This Part 3-12 is to be used in conjunction with the first edition of IEC 62841-1:2014. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the essential limit deviations and run-out tolerances for bonded abrasive products.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off

This document defines the concept of how to design tool items, limited to any kind of burrs, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of burrs. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D models for cutting tools; — creation and exchange of 3D models for cutting items; — creation and exchange of 3D models for other tool items not described in the scope of this document; — creation and exchange of 3D models for adaptive items; — creation and exchange of 3D models for assembly items and auxiliary items.

  • Technical specification
    30 pages
    English language
    sale 15% off
  • Technical specification
    30 pages
    French language
    sale 15% off

This document specifies requirements for the following grades of wrought tool steels:
a)    non-alloy cold-work tool steels;
b)    alloy cold-work tool steels;
c)    alloy hot-work tool steels;
d)    high-speed tool steels.
If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or cold-rolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1.
NOTE       Tables 2, 4, 6 and 8 cover only those steels which have gained certain international importance, which does not mean, however, that they are available in all industrial countries. In addition, a number of other steels for tools are specified in regional, national or company standards.
Where the heat resistance of the tools is of particular importance, as for example in the case of tools for hot forming glass, the material selection is based on ISO 4955.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with diamond tools whose cutting edges are made of CVD diamond, either as a solid single piece or as a coating. The tool specifications are differentiated into CVD diamond-coated tools (CVD diamond thin-film coatings) and tools with a CVD diamond cutting insert. According to ISO 513, CVD diamond tools can be classified under "hard coatings of hard metal and ceramic" and "binder-free polycrystalline diamond". In order to differentiate the CVD diamond tools from tools with monocrystalline synthetic or natural diamond (MCD or monocrystalline diamond) or with sintered diamond with a binder phase (PCD or polycrystalline diamond), the structure and characteristics of MCD and PCD tools with binder phase are also briefly described.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off

This document defines the concept of how to design the connection interfaces for adaptive and tool items, limited to any kind of standardized connections, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of connection interface. Not all dimensions given in this document are defined in the ISO 13399 series. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other connection interfaces not being described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

  • Technical specification
    43 pages
    English language
    sale 15% off
  • Technical specification
    43 pages
    French language
    sale 15% off

This document defines the concept of how to design adaptive items, limited to any kind of driven tool units, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of driven tool units. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for tool items; — concept of 3D models for other adaptive items not being described in the scope of this document; — concept of 3D models for assembly items and auxiliary items.

  • Technical specification
    34 pages
    English language
    sale 15% off
  • Technical specification
    34 pages
    French language
    sale 15% off

This document specifies a concept for the design of machine operated feed out tools, limited to any kind of machine operated feed out tools, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of machine operated feed out tools. The following are outside the scope of this document: — applications where these standard data can be stored or referenced; — creation and exchange of 3D for cutting tools; — creation and exchange of 3D for cutting items; — creation and exchange of 3D for tool items; — creation and exchange of 3D for other adaptive items not being described in the scope of this document; — creation and exchange of 3D for assembly items and auxiliary items.

  • Technical specification
    40 pages
    English language
    sale 15% off
  • Technical specification
    41 pages
    French language
    sale 15% off

This document specifies the dimensions and the mechanical characteristics of metal slitting saws, metric series. It applies to the following two types of metal slitting saws: — metal slitting saws with fine teeth; — metal slitting saws with coarse teeth. If there is a need to extend the range or introduce other series of teeth, it is intended that such additions be according to the data given in the graph in Annex A.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

This document specifies the dimensions of machine bridge reamers. It gives, for a series of diameter ranges, d1, from 6 mm to 50,8 mm, the values, in millimetres, for the following dimensions of these tools: — overall length, l3; — total cutting edge length, l2; — tapered cutting edge length, l1. Unless otherwise stated, these reamers are right-hand cutting.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

This document specifies the dimensions for interchangeability between milling cutters with tenon drive and the cutter seating of cutter arbors. It is applicable only to milling cutters of the metric series. It gives the interchangeability dimensions for: — the milling cutters; — the cutter seating on the arbor; — the cutter retaining screw on the cutter arbor.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

This document specifies a concept for the design of tool items, limited to any kind drilling and countersinking tools for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of drills and countersinking tools for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other tool items not being described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

  • Technical specification
    58 pages
    English language
    sale 15% off
  • Technical specification
    59 pages
    French language
    sale 15% off

This document specifies a concept for the design of tool items, limited to any kind of cartridges for indexable inserts, together with the usage of the related properties and domains of values. This document specifies the requirements of simplified 3D models for data exchange of cartridges for indexable inserts. The following are outside the scope of this document: — applications where these standard data may be stored or referenced; — concept of 3D models for cutting tools; — concept of 3D models for cutting items; — concept of 3D models for other tool items not described in the scope of this document; — concept of 3D models for adaptive items; — concept of 3D models for assembly items and auxiliary items.

  • Technical specification
    22 pages
    English language
    sale 15% off
  • Technical specification
    22 pages
    French language
    sale 15% off
  • Technical specification
    22 pages
    French language
    sale 15% off

2017-03-16 SW: DOW=DOR+24 m.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the determination of the maximum speed for given eccentricity at clamping devices for the shank strength of milling tools with cylindrical and taper shank. It also specifies the marking of the tool. Bore mounted tools which are mounted on an arbor shall be considered as a shank mounted tool.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies all hazards arising from the use of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted), integrated tools and circular saw blades.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 16084:2017 specifies requirements and provides calculations for the permissible static and dynamic residual unbalances of rotating single tools and tool systems. It is based on the guideline that unbalance related centrifugal forces induced by the rotational speed do not harm the spindle bearings, as well as prevent unbalance related impairments of machining processes, tool life and work piece quality. NOTE 1 Tools and tool systems covered by ISO 16084:2017 are, for example, those with hollow taper interfaces (HSK) according to ISO 12164-1 and ISO 12164-2, modular taper interface with ball track system according to the ISO 26622 series polygonal taper interface according to the ISO 26623 series, taper 7/24 according to ISO 7388-1, ISO 7388-2, ISO 9270-1 and ISO 9270-2 related to their individual operating speed. Modular tool systems are another important and complex issue of ISO 16084:2017. Calculations and process descriptions for balancing these components and the assembled tool systems are included. ISO 16084:2017 is putting an important focus on the possible clamping dislocations of tool shanks and their effects on the balancing procedure. These dislocations can occur between a tool or a tool system and the machine tool spindle (e.g. with every tool change), as well as within a modular tool system during its assembly. NOTE 2 Unfavourable process or system conditions (e.g. partial resonances of the machine structure generated by particular rotational speeds) or design and machine-related technical conditions (e.g. the projecting length of the axes, narrow space conditions, vibration susceptible devices, clamping devices and tool design) may lead to increased vibration loads and balancing requirements. This is dependent on the individual interaction of the machine and the tool spindle system and cannot be covered by a standard. A deviation from the recommended limit values of ISO 16084:2017 can be required in individual cases. NOTE 3 Wear of the shank interfaces may lead to possible variations of the clamping situation and thus to worse run-out and balancing conditions. These errors cannot be specifically addressed in a standard.

  • Standard
    71 pages
    English language
    sale 15% off
  • Standard
    75 pages
    French language
    sale 15% off

ISO 3364:2017 specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° normal clearance. These inserts are primarily intended to be mounted by top and hole clamping or by hole alone on turning and boring tools.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off

This European Standard is applicable to the following coated abrasive products and a combination of coated and non-woven abrasive products: flap wheels, flap discs, vulcanised fibre discs and spindle mounted flap wheels. It also applies to back-up pads for vulcanised fibre discs. These products are manufactured using the following abrasive grains: aluminium oxide, silicon carbide, diamond, or CBN.
This European Standard specifies requirements and/or measures for removal or reduction of hazards resulting from the design and application of the coated abrasive products and clamping devices.
This European Standard also contains procedures and tests for verification of compliance with the requirements as well as safety information for use, which is to be made available to the user by the manufacturer.
The hazards taken into consideration are listed in Clause 4 of this standard.
This European Standard does not apply to abrasive products entirely of non-woven web.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 10911:2017 specifies the dimensions of solid hardmetal end mills with cylindrical shank. NOTE For the relationship between designations in this document and the ISO 13399 series, see Annex A.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

ISO 4231:2016 is a supplement to ISO 2568 and ISO 4230 and specifies the dimensions of hand- and machine-operated circular screwing dies intended for production of parallel pipe threads, G series, in accordance with ISO 228‑1.
The general dimensions of these dies (diameter, thickness and fixing dimensions) are in accordance with ISO 2568 so as to permit the driving of hand-operated dies with the aid of the die stocks defined in that document.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4230:2016 is a supplement to ISO 2568 and ISO 4231 and specifies the dimensions of hand- and machine-operated circular screwing dies intended for production of taper pipe threads, R series, in accordance with ISO 7‑1.
With the exception of the die 1/16, the general dimensions of these dies (diameter, thickness and fixing dimensions) are in accordance with ISO 2568 so as to permit the driving of hand-operated dies with the aid of the die stocks defined in that document.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day