1.1   This document specifies requirements for design, performance, safety and hygiene of refrigerated bulk milk coolers and the related methods of test.
NOTE   The informative Annex J gives some elements regarding the estimation and calculation of energy consumption.
This document deals with all significant hazards, hazardous situations and events relevant to bulk milk coolers on farm, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
It applies to refrigerated bulk milk tanks with air-cooled condensing units and automatic control intended for installation on farms or at milk collection points. It applies to tanks for two milkings (24 h), four milkings (48 h) and six milkings (72 h), in which the cooling takes place totally (non-pre-cooled milk) or partially (in case of pre-cooled milk) within the tank. It also applies to tanks in combination with a continuous system of milking (e.g. milking with robot).
1.2   This document does not cover:
-   mobile tanks;
-   tanks intended to be tilted for drainage;
-   equipment for delivering the milk to the tank;
-   equipment for pre-cooling of the milk;
-   the hazards due to the use of other energy than electrical energy;
-   pressure aspect of vacuum tanks (i.e. tanks where the inner part of the vessel is designed to operate at a pressure below atmospheric pressure).
1.3   Noise is not considered to be a significant hazard, but relevant for bulk milk coolers. This document therefore includes information in 7.1 and in Annex A concerning the manufacturer's declaration of the noise emission level of the cooler.
1.4   This document does not cover the calibration requirements for the tank to be used as a system for payment purpose.
1.5   This document is not applicable to bulk milk coolers on farm which are manufactured before the date of its publication as EN.

  • Standard
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies principles and requirements for the mechanical resistance and stability, serviceability and durability for design and construction of commercial production greenhouse structures, including their foundations, irrespective of the material used, for the professional production of plants (crops).
Fire resistance-related aspects are not covered in this document.

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies principles and requirements for the mechanical resistance and stability, serviceability and durability for design and construction of commercial production greenhouse structures, including their foundations, irrespective of the material used, for the professional production of plants (crops).
Fire resistance-related aspects are not covered in this document.

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This document specifies requirements for design, performance, safety and hygiene of refrigerated bulk milk coolers and the related methods of test.
NOTE   The informative Annex K gives some elements regarding the estimation and calculation of energy consumption.
This document deals with all significant hazards, hazardous situations and events relevant to bulk milk coolers on farm, when they are installed, used and maintained as intended by the manufacturer (see informative Annex A).
It applies to refrigerated bulk milk tanks with air-cooled condensing units and automatic control intended for installation on farms or at milk collection points. It applies to tanks for two milkings (24 h), four milkings (48 h) and six milkings (72 h), in which the cooling takes place totally (non-pre-cooled milk) or partially (in case of pre-cooled milk) within the tank. It also applies to tanks in combination with a continuous system of milking (e.g. milking with robot).
1.2   This document does not cover:
-   mobile tanks;
-   tanks intended to be tilted for drainage;
-   equipment for delivering the milk to the tank;
-   equipment for pre-cooling of the milk;
-   the hazards due to the use of other energy than electrical energy;
-   pressure aspect of vacuum tanks (tank of which the inner vessel is designed to operate at a pressure below atmospheric pressure);
-   calibration requirements for the measurement of the milk volume.
1.3   This document is not applicable to bulk milk coolers on farms which are manufactured before the date of its publication as EN.

  • Standard
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This document specifies the standardization of side curtain ventilation systems as defined in 3.1. This document specifies the safety aspects and performance. Included are machines that operate using the potential energy stored by the earlier application of human or animal force, such as stretched springs.
This document addresses the following significant hazards associated with side curtain systems:
-   crushing;
-   cutting or severing;
-   drawing-in or trapping;
-   entanglement;
-   shearing;
-   suffocation;
-   electrocution and shock;
-   incorrect design, location or identification of control devices.
1.2   Exclusions
This document does not apply to the following, which are intended for a different use:
-   doors and side curtains when used as doors which are specified in EN 13241:2003+A2:2016;
-   systems inflated by air;
-   screens supplied for the control of fire or smoke;
-   screens that move instantaneously upon the application of human force;
-   side curtains when used to control ventilation conditions in a toxic or explosive environment.
This document is not applicable to side curtain ventilation systems manufactured before the date of its publication.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electric fence energizers, the rated voltage
of which is not more than 250 V and by means of which fence wires in agricultural, domestic
or feral animal control fences and security fences may be electrified or monitored.
NOTE 101 Examples of electric fence energizers coming within the scope of this standard are:
– mains-operated energizers;
– battery-operated electric fence energizers suitable for connection to the mains, as shown in Figure 101
and Figure 102;
– electric fence energizers operated by non-rechargeable batteries either incorporated or separate.
This standard does not in general take into account
– the use of appliances by young children or infirm persons without supervision;
– the playing with appliances by young children.
NOTE 102 Attention is drawn to the fact that
– for appliances intended to be used on board ships or aircraft, additional requirements can be necessary;
– in many countries, additional requirements are specified by the national health authorities, the national
authorities responsible for the protection of labour, the national water supply authorities and similar authorities.
NOTE 103 This standard does not apply to
– electromagnetically coupled animal trainer collars;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a
corrosive or explosive atmosphere (dust, vapour or gas);
– separate battery chargers (IEC 60335-2-29);
– electric fishing machines (IEC 60335-2-86);
– electric animal-stunning equipment (IEC 60335-2-87);
– appliances for medical purposes (IEC 60601

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applicable to the safety of electric fence energizers, the rated voltage of which is not more than 250 V.

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2019-08-2: PR=70278 (A11) covers common mods. to this EN

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applicable to the safety of electric fence energizers, the rated voltage of which is not more than 250 V.

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the standardisation of side curtain ventilation systems supplied for environmental control, installed on farm buildings, that use a barrier made from a flexible foil or fabric which move via a rolling or folding action, or rigid panels that slide; as far as safety aspects, performance and sustainebility issues are concerned. Included are machines that operate using the potential energy stored by the earlier application of human or animal force, such as stretched springs.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies minimum performance and information requirements for monitoring devices of bulk milk cooling tanks as part of milking and milk cooling machinery installations in agricultural operations. It also specifies the minimum requirements for materials, design and installation. The purpose of this document is to contribute to a high-quality milk production by monitoring, collecting data and providing alarms with respect to defined parameters of the milk cooling, storage and cleaning processes.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

See title

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies principles and requirements for the mechanical resistance and stability, serviceability and durability for design and construction of commercial production greenhouse structures, including their foundations, irrespective of the material used, for the professional production of plants (crops).
Fire resistance-related aspects are not covered in this document.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements related to dimensional, mechanical, optical and thermal characteristics of thermoplastic films used for covering permanent or temporary greenhouses and walking tunnels and low tunnels used for forcing and semi-forcing vegetable, fruit and flower crops.Lay-flat perforated cover films are also in the scope of this European Standard.It specifies a classification for the durability of covering films and the test methods referred to in this standard.This European Standard specifies also test methods for the determination of the chlorine and sulfur contents of films subjected to use.This European Standard is applicable to thermoplastic covering films used in agriculture and horticulture in Europe, in the thickness range 20 μm up to more than 250 μm, based on polyethylene and/or ethylene copolymers materials, of the following types: non-thermal films, thermal clear films and thermal diffusing films.This European Standard also defines guidance for installation, use and disposal of covering films. It defines the conventional expected lifetime, as well as rules that allow evaluating the remaining use potential in the event of a failure before the normal end-of-use date.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies principles and requirements for the mechanical resistance and stability,
serviceability and durability for design and construction of commercial production greenhouse structures
irrespective of material, including their foundations, for the professional production of plants and crops.
Fire resistance-related aspects are not covered in this standard.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC 61 advise on 2016-02-01: Common modifications needed but experts on these products not yet detected and not declared their availability to prepare a suitable proposal

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements related to dimensional, mechanical and optical characteristics of thermoplastic films and tubes used during the manufacture of silage and designed to last at least one year for protecting fodder.
It specifies a classification for the durability of silage films and the test methods referred to in this standard.
This European Standard is applicable to transparent, black, white or coloured (e.g. black/white) thermoplastic silage films based on polyethylene, ethylene copolymer, EVOH and polyamide.
These films are intended for covering bunker silos, silage tubes or silage clamps for preserving forage. They protect the forage and preserve it from rain and air. These films are not intended to cover bales piles (e.g. straw bales and hay bales).
Silage films obtained by sealing two or more films in machine direction are out of the scope of this document.
This European Standard also defines installation, use and removal conditions of silage films. It defines the conventional useful lifetime, as well as rules that allow evaluating the remaining use potential in the event of a failure before the normal end-of-use date.
NOTE   These rules allow estimating the residual value of the films. These provisions only apply to the film itself and the damage it has undergone. Any other problem falls within the scope of professional practices and the general terms and conditions of sale.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

DOP of 12 months! * 2017-03-22 FJD - No xml version as mother version was not originally published as xml.

  • Amendment
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60335-2-76:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 60335-2-76:2018 deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural, domestic or feral animal control fences and security fences may be electrified or monitored. Examples of electric fence energizers coming within the scope of this standard are:
– mains-operated energizers;
– battery-operated electric fence energizers suitable for connection to the mains;
– electric fence energizers operated by non-rechargeable batteries either incorporated or separate.
This standard does not apply to:
– electromagnetically coupled animal trainer collars;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
– separate battery chargers (IEC 60335-2-29);
– electric fishing machines (IEC 60335-2-86);
– electric animal-stunning equipment (IEC 60335-2-87);
– appliances for medical purposes (IEC 60601).
This Part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard. This third edition cancels and replaces the second edition published in 2002, Amendment 1:2006 and Amendment 2:2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
– the text has been aligned with Edition 5.2 of Part 1;
– additional requirements for security fence energizers have been introduced (Clauses 3, 7, 19, 22, Figures and Annex BB);
– specific requirements for battery operated energizers have been moved to Annex S.
The contents of the corrigendum of November 2018 have been included in this copy.

  • Standard
    123 pages
    English and French language
    sale 15% off

This European standard specifies the requirements related to dimensional, mechanical and optical characteristics of thermoplastic films and tubes used during the manufacture of silage and designed to last at least one year for protecting fodder.
It specifies a classification for the durability of silage films and the test methods referred to in this standard.
This European Standard is applicable to transparent, black, white or coloured (e.g. black/white) thermoplastic silage films based on polyethylene, ethylene copolymer, EVOH and polyamide.
These films are intended for covering bunker silos, silage tubes or silage clamps for preserving forage. They protect the forage and preserve it from rain and air. These films are not intended to cover bales piles (e.g. straw bales).
This European standard does not cover silage film obtained by sealing two or more films in machine direction.
This European Standard also defines installation, use and removal conditions of silage films. It defines the conventional useful lifetime, as well as rules that allow evaluating the remaining use potential in the event of a failure before the normal end-of-use date.
NOTE   These rules allow estimating the residual value of the films. These provisions only apply to the film itself and the damage it has undergone. Any other problem falls within the scope of professional practices and the general terms and conditions of sale.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements related to dimensional, mechanical, optical and thermal characteristics of thermoplastic films for mulching applications in agriculture and horticulture.
These mulching films are intended to be removed after use and not incorporated in the soil.
It specifies a classification for durability of mulching films and the test methods referred to in this document.
This European Standard is applicable to thermoplastic mulching films, used for agriculture and horticulture in Europe, based on polyethylene and/or ethylene copolymers, of the following types:
-   transparent films;
-   black films;
-   reflective films (e.g. white films, black/white films and black/silver films);
-   films of other colour(s) for weed control (e.g. green, brown).
This European Standard also defines installation, use and removal conditions of mulching films.
NOTE   Mulch films are considered as highly contaminated by soil and vegetal residues: the observed rates (or levels) of contamination of mulch films can vary from 70 % to 90 %. Therefore the film thickness is a key factor on the rate of contamination, the thinnest films (e.g. less than 25 µm) will be the mostly contaminated, difficult, expensive to remove, recover and recycle.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2015-03-11: PR=24832 covering CMs to EN 60335-2-76:2005/FprA2:2013 merged in A2:2015 * FprAE (23101)  also merged with 23990

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 24631-3:2017 provides the means of evaluating the performance of ISO 11784- and ISO 11785-conformant radiofrequency identification (RFID) transponders used in the individual identification of animals. The test procedures specified in this document are recognized by the Federation of European Companion Animals Veterinary Association (FECAVA) and World Small Animal Veterinarian Association (WSAVA) and as such can be applied also to companion animals.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off

ISO 24631-4:2017 provides the means of evaluating the performance of ISO 11784- and ISO 11785-conformant RFID (radiofrequency identification) transceivers used in the individual identification of animals. The test procedures specified in this document are recognized by the Federation of European Companion Animals Veterinary Association (FECAVA) and World Small Animal Veterinarian Association (WSAVA) and, as such, can be applied also to companion animals.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off

ISO 24631-1:2017 provides the means of evaluating the conformance with ISO 11784 and ISO 11785 of radiofrequency identification (RFID) transponders used in the individual identification of animals. It sets forth the conditions for the granting and use of the manufacturer code related to a transponder and the associated rights and obligations of the parties involved in the issuance of the code. The test procedures specified in this document are recognized by the Federation of European Companion Animals Veterinary Association (FECAVA) and World Small Animal Veterinarian Association (WSAVA) and, as such, can be applied also to companion animals.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off

ISO 24631-2:2017 provides the means of evaluating the conformance with ISO 11784 and ISO 11785 of radiofrequency identification (RFID) transceivers used in the individual identification of animals. It also specifies the procedure for applying for a transceiver test registration and the associated rights and obligations of the parties involved. ISO 24631-2:2017 includes a wireless synchronization test applicable to mobile transceivers; however, it contains no provision for evaluating the wired synchronization of stationary transceivers. The test procedures specified in this document are recognized by the Federation of European Companion Animals Veterinary Association (FECAVA) and World Small Animal Veterinarian Association (WSAVA) and, as such, can be applied also to companion animals.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off

DOP of 12 months!

  • Amendment
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 24631-5:2014 specifies rules and procedures for verifying the capability of RFID transceivers of reading transponders used in individual animal identification complying to ISO 11784 and ISO 11785. In addition, ISO 24631-5:2014 specifies how to apply for an approval and the rights and duties to use this approval. ISO 24631-5:2014 does not set out the procedures for evaluating wireless synchronised mobile transceivers and also this document contains no provision for evaluating wired synchronisation of stationary transceivers. This test differs from ISO 24631‑2, which is intended for testing transceivers with all mandatory features described in ISO 11784 and ISO 11785. The test described here is intended for cost-effective non-synchronising transceivers that are capable of reading transponders complying to ISO 11784 and ISO 11785 but have no synchronisation capability and does not have to support the dual adaptive protocol. Furthermore, the activation field frequency accuracy is more relaxed.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off

This International Standard deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural, domestic or feral animal control fences and security fences may be electrified or monitored.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 24631-7:2012 specifies rules and procedures for synchronizing RFID transceivers while reading transponders used in individual animal identification complying to ISO 11784 and ISO 11785. The synchronization scheme described herein may be fully implemented within each reader, and such readers when attached to the synchronization bus create a peer-to-peer network (all readers are equal ? there is no dedicated master). Additionally, a cluster of readers, which could be in a master/slave configuration, may also be added to the bus using a dedicated, manufacturer specific Synchronization Interface. The Synchronization Interface presents to the synchronization bus electrical characteristics identical to those of a single peer-to-peer reader. The transceiver conformance standard ISO 24631-2 permits activation on/off timing tolerances of −0/+1 ms and therefore gives reader manufacturers options as to their preferred method for detecting the HDX header; partial or full. However, when synchronizing readers, irrespective of which header detection method is used, it is critical that all readers adhere strictly to the specific timings and timing tolerances as given in the timing diagrams. Particular attention should also be given to fault diagnostics which becomes more important when a reader network comprises products from different manufacturers. The obvious case is where a reader which is part of a network has become detached e.g. sync cable break, and it considers it's self to be now standalone and thus permitted to operate asynchronously to the detriment of all other readers.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off

The requirements of this part of IEC 60364 apply to fixed electrical installations inside and outdoors of agricultural and horticultural premises. Some of the requirements are also applicable to other locations that are in common buildings belonging to the agricultural and horticultural premises. Rooms, locations and areas for household applications and similar are not covered by this standard. If some of the special requirements of Part 705 are also applicable for residences and other locations in such common buildings this is stated in the normative text.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 24631-6:2011 specifies the representation of the animal identification information specified in ISO 11784 and ISO 11785 on a transceiver display and its communication from transceivers to systems in which the information may be stored in a database, used for process control or displayed.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

This part of ISO 7700 specifies a method of checking the performance of moisture meters in service for measuring the moisture content of cereal grains.
This part of ISO 7700 is not applicable for pattern approval, nor for the initial calibration of moisture meters.
The results of the checking described in this part of ISO 7700 are used to decide whether to perform a revision or a repair of the moisture meter.
NOTE For built and pattern approval specifications, see OIML Recommendation 59[1].

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    French language
    sale 15% off

This European Standard specifies safety requirements for the design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface.
It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders, as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
The document only deals with the hazards generated by the silo unloader and not with those of the silo system itself (e.g. hazards arising from generated gases).
This document is not applicable to noise and fire hazards and hazards related to the foreseeable misuse.
The document does not deal with technical requirements for installation or removal of the unloader from one silo to another.
The list of significant hazards dealt with in this document is given in annex A. Annex A also indicates the hazards which have not been dealt with.
The environmental aspects have not been considered in this document.
This document applies primarily to machines which are manufactured after the date of issue of this document.
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present document is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

To be implemented in all countries with exception of CH * See D129/130 (new implementation dates) and D129/131 (not to be published before 2008-01-01)

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies safety requirements for the design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface. It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders, as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Complementary to Part 1. Varied general rules and additional detailed rules for the structural design of free standing or supported steel silos of circular or rectangular plan for storing bulk granular solids.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC - Modifications in Foreword, Clauses 1, 2, 4, 5, 6, 8 and 9 and Annex A in the E mother reference version.

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC - Modifications in Foreword, Clauses 1, 2, 4, 5, 6, 8 and 9 and Annex A in the E mother reference version.
2013: Originator of XML version: first setup pilot of CCMC in 2012

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Incorporates EN 60335-2-76:2005/prAA (pr=16650)

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • National annex
    6 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day

This standard applies for automatic back splitting machines.
This standard deals with all significant hazards, hazardous situations and events relevant to machines, appliances and machinery, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
These significant hazards, hazardous situations and events exist during the whole life of back splitting machines.
This standard applies not to curing injection machines which are manufactured before CEN this document has published.
This European standard specifies requirements for the design and manufacture of the machines used in slaughterhouses in order to fully automatically split meat animal (beef and pork) along the back-bone axis (see figure 1).

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements for reinforced and  prestressed precast concrete floor slats used in slatted floors  for the housing of livestock and provides for the evaluation of  conformity of these products. This document does not cover  slats for loadings other than stock and stockmen.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applicable to the safety of electric fence energizers, the rated voltage of which is not more than 250 V.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for reinforced and prestressed precast concrete floor slats used in slatted floors for the housing of livestock and provides for the evaluation of conformity of these products. This standard does not cover slats for loadings other than stock and stockmen.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The requirements of this part of IEC 60364 apply to fixed electrical installations inside and outdoors of agricultural and horticultural premises. Some of the requirements are also applicable to other locations that are in common buildings belonging to the agricultural and horticultural premises. Rooms, locations and areas for household applications and similar are not covered by this standard. If some of the special requirements of Part 705 are also applicable for residences and other locations in such common buildings this is stated in the normative text.

  • Standardization document
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Amandma A1:2007 je dodatek k standardu SIST EN 60335-2-70:2003
Deals with the safety of milking machines, to be used in stalls and in the open, that are designed for milking farm animals, such as cows, the rated voltage of the milking machines being not more than 250 V for single-phase operation and 480 V for other operations.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day