97.200 - Equipment for entertainment
ICS 97.200 Details
Equipment for entertainment
Unterhaltungstechnik
Equipements de loisirs
Oprema za razvedrilo
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 97.200 - Equipment for entertainment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document is applicable to fully enclosed play equipment intended for installation inside and outside buildings, for children up to 14 years old, see 3.1.
The purpose of this document is to provide additional safety requirements covering particulars of these structures, such as exits and escape routes, visibility, external "climbability", containment walls/netting in relation to safety area, ignition resistance, specific equipments/components, impact-attenuating surfaces, signage, specific inspection and maintenance.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesGerman languagesale 10% offe-Library read for1 day
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.
This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies acceptable criteria for microbiological cleanliness and adequacy of preservation of the specified toy materials. The requirements in this document apply to all toys that are, contain or are supplied with aqueous materials (e.g. paste, putty, liquid or gel). In addition, this document applies to toys that are or include a cosmetic (including those intended for use on a toy as well as on the child). Powders and similar substances intended to be mixed with water are also within the scope of this document. The cleanliness and preservation effectiveness requirements are applicable to a toy as it is initially received by the consumer in an unopened and undamaged container and do not apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse, unless specifically noted otherwise. The microbial limits and test methods contained in this document are inappropriate to apply to products that are consumer complaint returns, as there is no way to establish what conditions the toys have been subject to before being returned. The following are excluded from the scope of this document: — materials that are inaccessible during normal use or reasonably foreseeable abuse; — powder or powder-like materials intended to show biological phenomena, e.g. shrimp eggs, seeds, soil; — food.
- Standard7 pagesEnglish languagesale 15% off
- Draft8 pagesEnglish languagesale 15% off
This document specifies a method standard for the determination of di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl-butyl phthalate (BBP), bis-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-iso-nonyl phthalate (DINP) and di-iso-decyl phthalate (DIDP) in toys. It can also be applied to other phthalate esters (see G.2) if adequate validation is demonstrated. This document applies to toys made of plastics, textiles, coatings and liquids. This document has been validated for polyvinylchloride (PVC) and polyurethane (PU) plastics and some representative paint coatings (see Annex B). This document can also be applied to other product categories.
- Standard40 pagesEnglish languagesale 15% off
- Draft39 pagesEnglish languagesale 15% off
This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities. This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Draft6 pagesEnglish languagesale 15% off
- Draft7 pagesFrench languagesale 15% off
This document specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition. The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition. This document includes general requirements relating to all toys and specific requirements and test methods relating to the following toys, which are considered as being those presenting the greatest hazard: — toys intended to be worn on the head, such as beards, moustaches and wigs made from pile or flowing elements, masks, hoods and headdresses; however, paper and paperboard hats without embellishments or attachments are excluded; — toy disguise costumes and toys intended to be worn by a child in play; — toys intended to be entered by a child and constructed from textiles and/or polymer sheets and films; — soft-filled toys (see A.6).
- Standard29 pagesEnglish languagesale 15% off
- Draft30 pagesEnglish languagesale 15% off
This document specifies requirements for the maximum amount and, in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities. These substances and mixtures are: — those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS);[3] — substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the GHS; — any other chemical substance(s) and mixture(s) delivered with the experimental set. This document applies to experimental sets for chemistry and related activities, including chemistry sets, crystal-growing sets, carbon-dioxide-generating experimental sets and supplementary sets. This document also specifies requirements for marking, a contents list, instructions for use, eye protection and the equipment intended for carrying out the experiments. This document does not apply to combined sets, for example a combination of a chemistry set and a crystal-growing set. Requirements for certain other chemical toys are given in ISO 8124-11. See Clause A.1.
- Standard25 pagesEnglish languagesale 15% off
- Draft25 pagesEnglish languagesale 15% off
This document is a collection of rationales for EN 1176 in order to support the use of EN 1176 by providing additional information and explanations. It does not contain additional requirements it only serves as a supporting document.
- Draft53 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies mechanical, physical and chemical product characteristics of fixed seating for spectator facilities used in sports venues (indoor and outdoor) in the spectator viewing area. It also specifies the criteria for fixing the seating to the structure.
These characteristics and criteria are determined to ensure an adequate resistance to static and dynamic stresses and to atmospheric agents. This document specifies comfort, functionality and safety requirements to prevent serious injury through normal use, as well as misuse that might reasonably be excepted to occur. This document does not include any fire behaviour or resistance requirements.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft23 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
- Draft3 pagesEnglish languagesale 15% off
- Draft3 pagesEnglish languagesale 15% off
This document gives a list of the most frequent terms relating to camping tents and caravan awnings together with some definitions.
- Standard30 pagesEnglish languagesale 15% off
The purpose of this document is to publish replies to requests for interpretations, to all parts of EN 1176, which have been drafted by the interpretation panel and confirmed by CEN/TC136/SC1.
- Technical report42 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft39 pagesEnglish languagesale 10% offe-Library read for1 day
NEXT ACTION: UNDER BT CONSULTATION, CLOSING ON 2019-09-17
HAS&EY ACTION BY 2019-06-17: assessement expected by 2019-06-17
CCM ACTION BY 2019-04-30 (request post-factum assessment) - done
2018-12-07 SW: Waiting for annex ZZ to be added to the publication by BT decision after positive assessment.2017-05-03: D156/C084 - Ratified standards not being made available.
2017-04-20 OD: Publication on hold, No TC reply to proofing
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies mechanical, physical and chemical product characteristics of fixed seating for spectator facilities used in sports venues (indoor and outdoor) in the spectator viewing area. It also specifies the criteria for fixing the seating to the structure.
These characteristics and criteria are determined to ensure an adequate resistance to static and dynamic stresses and to atmospheric agents. This document specifies comfort, functionality and safety requirements to prevent serious injury through normal use, as well as misuse that might reasonably be excepted to occur. This document does not include any fire behaviour or resistance requirements.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft23 pagesEnglish languagesale 10% offe-Library read for1 day
This method of test specifies a test method for determining the thermal resistance of textile articles which may be filled, e.g. padded coats and jackets, child sleep bags, cot duvets, etc., or textiles articles with a thermal resistance of up to 0,5 m2K/W (5,0 tog) and/or which do not have uniform thickness.
The test method is applicable to products with a thermal resistance within the range 0,025 m2K/W (0,25 tog) to approximately 0,5 m2K/W (5,0 tog) but is limited only by the ability of the test apparatus to cope with the thickness of the test sample.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements, test methods and other provisions for the labelling of adult sized sleeping bags for use in sports and leisure time activities at a limit temperature ≥ ‐20 °C regarding thermal characteristics, dimensions and mass.
This document describes a method for the assessment of performance in steady‐state conditions of a sleeping bag with regard to the protection against cold.
NOTE 1 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means of establishing temperature ratings.
This document does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 2 No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not possible.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
- those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
- substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
- any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to inflatable play equipment intended for use by children fourteen years and under both individually and collectively. This document specifies safety requirements for inflatable play equipment for which the primary activities are bouncing and sliding. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of inflatable play equipment. It specifies information to be supplied with the equipment. The requirements have been laid down bearing in mind the risk factor based on available data. This document specifies the requirements that will protect a child from hazards that he or she may be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated. This document is not applicable to inflatable water-borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not bouncing or sliding.
- Standard45 pagesEnglish languagesale 15% off
- Draft45 pagesEnglish languagesale 15% off
- Draft45 pagesEnglish languagesale 15% off
This part of ISO 20187 specifies additional safety requirements for inflatable bouncing pillows intended for permanent installation. This part of ISO 20187 is applicable to inflatable play equipment intended for use by children fourteen years and under, both individually and collectively. This part of ISO 20187 specifies safety requirements for inflatable play equipment for which the primary activity is bouncing. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of inflatable play equipment. It specifies information to be supplied with the equipment. The requirements have been laid down bearing in mind the risk factor based on available data. This part of ISO 20187 specifies the requirements that will protect a child from hazards that he or she might be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated. This part of ISO 20187 is not applicable to inflatables dealt with in ISO 20187‑1:2022, inflatable water-borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not bouncing or sliding.
- Standard11 pagesEnglish languagesale 15% off
- Draft11 pagesEnglish languagesale 15% off
- Draft11 pagesEnglish languagesale 15% off
This part of ISO 20187 is applicable to inflatable play equipment intended for use by children fourteen years and under, both individually and collectively. This part of ISO 20187 specifies additional safety requirements for snappies for which the primary activities are climbing and sliding. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of inflatable play equipment. It specifies information to be supplied with the equipment. The requirements have been laid down bearing in mind the risk factor based on available data. This part of the ISO 20187 specifies requirements to protect a child from hazards that he or she might be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated. This part of the ISO 20187 is not applicable to inflatable water-borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not bouncing or sliding.
- Standard5 pagesEnglish languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
This document specifies the safety requirements for planning, selection, production, intended use as well as testing of aluminium stage decks and frames that are capable of being used as aluminium stage decks, inclinations, steps and stairs; including railings for performance areas (stages) and stands.
This document deals with all of the significant hazards, hazardous situations or hazardous events relevant to aluminium stage decks and frames when they are used as intended and under conditions of misuse reasonably foreseeable by the manufacturer.
If these products become components of a built environment, then structural requirements are expected to be taken into consideration.
This document does not apply to scaffolding used as substructures in stage and studio environments in accordance with the standard series EN 12810 and EN 12811 and not for fairground rides in accordance with EN 13814 1.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft23 pagesEnglish languagesale 10% offe-Library read for1 day
The purpose of this document is to publish replies to requests for interpretations, to all parts of the EN 1176 series, which have been drafted by the interpretation panel and confirmed by CEN/TC136/SC1.
- Technical report42 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft39 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements for the design and manufacture of aluminium decks and frames used in the entertainment industry.
This document does not apply to scaffolding used as substructures in stage and studio environments in accordance with the EN 12810 series and the EN 12811 series or fairground rides in accordance with EN 13814-1.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft23 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
- those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
- substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
- any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
2021-08-10 - TC origine - Improvement of some French Warning messages
- Corrigendum4 pagesEnglish languagesale 10% offe-Library read for1 day
The requirements in this document apply to all toys, i.e. any product designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise. The requirements of this document specify acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing (e.g. rattles, small parts, sharp points and edges, and hinge-line clearances) as well as acceptable criteria for properties peculiar to certain categories of toy (e.g. maximum kinetic energy values for non-resilient-tipped projectiles and minimum tip angles for certain ride-on toys). This document specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. The requirements vary according to the age group for which a particular toy is intended. The requirements for a particular age group reflect the nature of the hazards and the expected mental and/or physical abilities of a child to cope with them. This document also requires that appropriate warnings and/or instructions for use be given on certain toys or their packaging. Due to linguistic problems which may occur in different countries, the wording of these warnings and instructions is not specified but given as general information in Annex B. It should be noted that different legal requirements exist in many countries with regard to such marking. This document does not purport to cover or include every conceivable potential hazard of a particular toy or toy category. Except for labelling requirements indicating the functional hazards and the age range for which the toy is intended, this document has no requirements for those characteristics of toys which represent an inherent and recognized hazard which is integral to the function of the toy. EXAMPLE 1 An example of such a hazard is the sharp point necessary for the proper function of a needle. The needle is a hazard which is well understood by the purchaser of a toy sewing kit, and the functional sharp-point hazard is communicated to the user as part of the normal educational process of learning to sew as well as at the point of purchase by means of cautionary labelling on the product's packaging. EXAMPLE 2 As a further example, a two-wheeled toy scooter has inherent and recognized hazards associated with its use (e.g. instability during use, especially while learning). The potential hazards associated with its structural characteristics (e.g. sharp edges, pinch hazards) will be minimized by conformity to the requirements of this document. Products not included within the scope of this document are: a) bicycles, except for those considered to be toys, i.e. those having a maximum saddle height of 435 mm (see 1); b) slingshots; NOTE 1 “Slingshots” are also known as “catapults” and are usually held in the hand; examples are given in Figure 1. Toy versions of medieval catapults and trebuchets are not exempt from this document; an example is given in Figure 2. c) darts with metal points; d) public playground equipment; e) compressed air- and gas-operated guns and pistols (see 1); f) kites (except for the electric resistance of their strings, which is included); g) model kits, hobby and craft items, in which the finished item is not primarily of play value; h) sporting goods and equipment, camping goods, athletic equipment, musical instruments and furniture; however, toys which are their counterparts are included; NOTE 2 It is recognized that there is often a fine distinction between, for example, a musical instrument or a sporting item and its toy counterpart. The intention of the manufacturer or distributor, as well as normal use and reasonably foreseeable abuse, determines whether the item is a toy counterpart or not. i) models of aircraft
- Standard151 pagesEnglish languagesale 15% off
This document specifies the requirements, test methods and other provisions for the labelling of adult
sized sleeping bags for use in sports and leisure time activities at a limit temperature ≥ ‐20 °C regarding
thermal characteristics, dimensions and mass.
This document describes a method for the assessment of performance in steady‐state conditions of a
sleeping bag with regard to the protection against cold.
NOTE 1 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain
parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means
of establishing temperature ratings.
This document does not apply to sleeping bags intended for specific purpose such as military use and
extreme climate zone expedition. It does not apply to sleeping bags for children or babies.
NOTE 2 No prediction model exists for the determination of the limiting temperatures based on the thermal
resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed
because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical
reasons, not possible.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
This method of test described a means of determining the thermal resistance of textile assemblies with a non-uniform thickness and child sleep bags and cot duvets. The test method is suitable for products with a thermal resistance within the range 0.25 tog (0.025 m².K/W) to 5.0 tog (0.5 m².K/W).
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 13814 defines requirements for the necessary independent inspections of amusement devices designed, manufactured, operated and used according to EN 13814-1:2019 and EN 13814-2:2019.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement ride and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations.
Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
In terms of workers’ health and safety, national regulations apply.
- Standard37 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, ferris wheels, roller coasters, chutes, booths, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
For all the equipment not covered by the requirements of EN 13814-1, the relevant standards apply.
Nevertheless this document can be used in the design of any similar structural or passenger carrying amusement device not explicitly mentioned herein.
In terms of workers’ health and safety, national regulations apply.
This document is applicable to manufacturing and major modification of amusement devices and rides for designs after the effective date of publication.
- Standard176 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft174 pagesEnglish languagesale 10% offe-Library read for1 day
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric commercial amusement machines
and personal service machines, their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances.
NOTE 101 Examples of appliances that are within the scope of this standard are
– amusement machines:
• tables;
• bowling machines;
• dartboards;
• driving simulators;
• gaming machines;
• kiddie rides;
• laser shooting appliances;
• pinball machines;
• video games;
• personal service machines;
• card re-value machines;
• currency dispensers;
• luggage lockers;
• weighing machines;
• shoe shining appliances.
As far as is practicable, this standard deals with the common hazards presented by
appliances that are encountered by users and maintenance persons.
NOTE 102 Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be
necessary;
– in many countries, additional requirements are specified by the national authorities responsible for health, for
the protection of labour and similar authorities.
NOTE 103 This standard does not apply to
– appliances intended exclusively for household use;
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a
corrosive or explosive atmosphere (dust, vapour or gas);
– appliances for washing cars;
– dispensing appliances and vending machines (IEC 60335-2-75);
– appliances within the scope of IEC 60065, such as jukeboxes and household video games
– appliances within the scope of IEC 60950-1, such as copying machines, ticket machines and automatic teller
machines;
– appliances intended to be used when a trained attendant is present, such as virtual reality systems;
– equipment intended exclusively for fairgrounds, such as carousels;
– self-balancing personal transport devices.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement rides and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations, and is concerned with the installing, assembly and disassembly, operating, handling, maintaining, repairing, modifying and inspecting of amusement devices, and is addressed to controllers, operators, attendants and inspection bodies. The following are not covered by this document (this list is not exhaustive): — grandstands; — construction site installations; — scaffolding; — removable agricultural structures; — simple coin-operated children's amusement devices; — carrying up to three children, and recreational devices like waterslides or summer toboggan runs; — playground equipment; — rope courses; — climbing walls; — inflatable trampolines and swimming pool equipment.
- Standard27 pagesEnglish languagesale 15% off
- Draft27 pagesEnglish languagesale 15% off
This document specifies the minimum requirements necessary for the independent inspections of amusement devices designed, manufactured, operated and used according to ISO 17842‑1 and ISO 17842‑2.
- Standard8 pagesEnglish languagesale 15% off
- Draft8 pagesEnglish languagesale 15% off
The development of a European standard(s) on reporting by online gambling service operators and suppliers to the gambling regulatory authorities in the Member States for the purpose of supervision of online gambling services will specify the core data for reporting purposes, while ensuring integrity and security of the data as well as personal data protection.
The requested European standard(s) will provide a voluntary tool to the gambling regulatory authorities in the Member States without prejudice to the scope of competence of Member States in the regulation of online gambling and without imposing any obligation on them to introduce reporting requirements or to authorize or deny authorization to any operators or suppliers.
- Standard271 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft271 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60335-2-82:2017(E) deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are: amusement machines; tables; bowling machines; dartboards; driving simulators; gaming machines; kiddie rides; laser shooting appliances; pinball machines; video games; personal service machines; card re-value machines; currency dispensers; luggage lockers; weighing machines; shoe shining appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons. For appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; This standard does not apply to appliances intended exclusively for household use; appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); appliances for washing cars; dispensing appliances and vending machines (IEC 60335-2-75); appliances within the scope of IEC 60065, such as jukeboxes and household video games; appliances within the scope of IEC 60950-1, such as copying machines, ticket machines and automatic teller machines; appliances intended to be used when a trained attendant is present, such as virtual reality systems; equipment intended exclusively for fairgrounds, such as carousels; self-balancing personal transport devices. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2008) and its Amendment 2 (2015). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - It is clarified that 22.44 is not applicable to amusement machines; - Modified some Notes to make them normative text (5.6, 11.2, 11.8, 15.2.101, 15.2.102, 15.2.104, 15.3, 19.4, 19.101, 24.101, 24.102) and - Reference to 22.106 is made in Annex R. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2-82 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of IEC 60335-1:2010, its Amendment 1:2013 and its Amendment 2:2016. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Key words: Amusement Machines, Personal Service Machines, Safety
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements, test methods and other provisions for the labelling of adult sized sleeping bags for use in sports and leisure time activities at a limit temperature ≥ ‐20 °C regarding thermal characteristics, dimensions and mass. This document describes a method for the assessment of performance in steady‐state conditions of a sleeping bag with regard to the protection against cold. NOTE 1 Sleeping bags without homogeneous fillings designed to provide local extra insulation in certain parts pose issues with the calibration and/or test procedure. Ongoing work continues to provide suitable means of establishing temperature ratings. This document does not apply to sleeping bags intended for specific purpose such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies. NOTE 2 No prediction model exists for the determination of the limiting temperatures based on the thermal resistance of the sleeping bag for children and babies. Moreover, such a model for testing cannot be developed because the necessary controlled sleep trials with children or babies in climatic chambers are, out of ethical reasons, not possible.
- Standard25 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
This document compiles a collection of different probes/gauges for assessing common playground equipment safety performance to eliminate known safety hazards such as: entrapment and entanglement hazards on playground, playspaces, and associated equipment used in different countries/regions around the world. It also explains some historical content of origins, the purpose and some rationales for the dimensions and shape of each of those probes. NOTE These test probes and gauges, their dimensions and related historic rationale for their existence are of significant value to playground equipment, manufacturers, designers, installers, assemblers, owners, operators and inspectors alike and are necessary tools to the reduction of serious, life-threatening and debilitating injuries to the public playground intended users.
- Technical report27 pagesEnglish languagesale 15% off
- Technical report27 pagesEnglish languagesale 15% off
IEC 62115:2017 specifies safety requirements for electric toys that have at least one function dependant on electricity, electric toys being any product designed or intended, whether or not exclusively, for use in play by children under 14 years of age. Examples of electric toys also within the scope of this standard are: - constructional sets; - experimental sets; - functional electric toys (an electric toy that performs and is used in the same way as a product, appliance or installation intended for use by adults, and which may be a scale model of such product, appliance or installation); - electric toy computers as well as a doll's house having an interior lamp. If the packaging is intended to have play value then it is considered to be part of the electric toy. This International Standard only covers the safety aspects of electric toys that relate to an electrical function. This standard covers the safety of electric toys taking power from any source, such as batteries, transformers, solar cells and inductive connections. This second edition cancels and replaces the first edition published in 2003, Amendment 1 (2004) and Amendment 2 (2010). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - the general conditions for tests has been rewritten and modified (Clause 5); - the criteria for reduced testing has been modified (Clause 6); - warnings for toys using button batteries or coin batteries have been added (7.3.3.2, 7.3.3.3); - warnings on ride-on toys have been added (7.5); - the requirements concerning accessibility of batteries have been updated (13.4.1 and 13.4.2); - added requirements to cover toys placed above a child (13.4.4); - added requirements to cover toys connected to other equipment (13.9); - modified the requirements for safety of toys incorporating optical radiation sources (Annex E), to include requirements for using the technical LED data sheet for checking compliance with the specified accessible emission limits (AEL); - updated the details for measurements of the optical radiation from the toy (Annex E); - introduced an informative Annex I concerning measurement methods for toys with an integrated field source generating EMF; - included a normative Annex J concerning safety of remote-controls for electric ride-on toys. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication. Key words: Safety, Electric Toys
- Standard102 pagesEnglish languagesale 10% offe-Library read for1 day
The purpose of this document is to provide replies to requests for interpretations of actual chemical standards in the EN 71-series:
- EN 71 3: Migration of certain elements;
- EN 71 4: Experimental sets for chemistry and related activities;
- EN 71 5: Chemical toys (sets) other than experimental sets;
- EN 71 7: Finger paints - Requirements and test methods;
- EN 71 9: Organic chemical compounds - Requirements;
- EN 71 10: Organic chemical compounds - Sample preparation and extraction;
- EN 71 11: Organic chemical compounds - Methods of analysis;
- EN 71 12: N-Nitrosamines and N-Nitrosatable substances;
- EN 71 13: Olfactory board games, cosmetic kits and gustative games.
- Technical report10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives the specifications for impact attenuation testing equipment used to evaluate the impact performance characteristics of playground surfacing. The specifications are aimed at ensuring that developers and manufacturers of such instruments meet minimum performance characteristics to allow repeatable, reproducible and accurate results. This document does not specify a test method. NOTE Such test methods are covered in other standards, e.g. EN 1177, ASTM F1292, ASTM F3313, AS 4422, CSA Z614.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Draft6 pagesEnglish languagesale 15% off
This document specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
- those classified as hazardous by the EC-legislation applying to hazardous substances and hazardous mixtures [1];
- substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
- any other chemical substance(s) and mixture(s) delivered with the experimental set.
This document applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008 [1].
This document also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments.
This document does not apply to combined sets, e.g. a combination of a chemistry set and a crystal growing set. It also does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5.
NOTE The terms "substance" and "preparation", are used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [2]. According to the Globally Harmonized System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [1], the timetable for the introduction of GHS is followed. The words "preparation" and "mixture" are considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this document, only the term "mixture" is used.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition.
The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition.
This European Standard includes general requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard:
— toys to be worn on the head: beards, moustaches, wigs, etc. made from hair, pile or material with similar features; masks; hoods, head-dresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers;
— toy disguise costumes and toys intended to be worn by a child in play;
— toys intended to be entered by a child;
— soft-filled toys.
NOTE Additional requirements for flammability of electric toys are specified in EN 62115.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft35 pagesEnglish languagesale 10% offe-Library read for1 day
2021: CLC legacy converted by DCLab NISOSTS
- Amendment31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles.
It details health and safety requirements on:
— the selection of materials;
— components and appliances;
— design considerations;
— tightness testing of installations;
— the contents of the user's handbook.
This document only covers installations supplied with 3rd family gases (LPG).
It does not cover:
— water connections or electrical power supplies to the appliance(s);
— portable appliances, incorporating their own LPG supply;
— the installation of LPG appliances to be used for commercial purposes;
— LPG installations on boats;
— LPG supply equipment and LPG appliances separate from and external to the body of the vehicle.
This document covers LPG tanks fulfilling the requirements of the Pressure Equipment Directive (2014/68/EU).
Attention is drawn to the Pressure Equipment Directive (2014/68/EU) for any parts of the installation operating above 0,5 bar.
- Standard50 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft44 pagesEnglish languagesale 10% offe-Library read for1 day
The purpose of this technical report is to assist users of EN 71-1 with the categorisation of projectile
toys under clause 4.17 of that standard. This report looks at various types of toys, commonly available
in the market and indicates under which part of 4.17 they should be assessed.
Various types of projectile launching products will not be considered toys (for example, a catapult used
for angling), further guidance on the categorisation of toy products can be found in EU commission
Explanatory guidance document.
- Draft19 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1 See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
- Category I: Dry, brittle, powder like or pliable materials;
- Category II: Liquid or sticky materials;
- Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2 For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
- All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
- All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).
- Standard60 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to machinery, machinery installations and machinery control systems used in places of assembly and in staging and production facilities for events and theatrical productions (stage machinery, for short). Such facilities include: theatres, multi-purpose halls, exhibition halls; film, television and radio studios; concert halls, schools, bars, discotheques, open-air stages and other rooms for shows and events.
The document applies to machinery installations with guided or unguided loads.
This document covers machinery used in the entertainment industry including machinery that is excluded from the Machinery Directive (2006/42/EC) specifically Article 1, 2(j) which excludes "machinery intended to move performers during artistic performances".
This machinery includes controls, electrical and electronic control systems, electrical and electronic equipment, hydraulic and pneumatic power supplies.
The principles in this document also apply to machinery installations based on new technologies or specially designed installations which are not expressly mentioned here but which nevertheless operate in a similar manner or are meant for similar purposes to the equipment listed above.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to machinery, machinery installations and machinery control systems used in places of assembly and in staging and production facilities for events and theatrical productions (stage machinery, for short). Such facilities include: theatres, multi-purpose halls, exhibition halls; film, television and radio studios; concert halls, schools, bars, discotheques, open-air stages and other rooms for shows and events.
The document applies to machinery installations with guided or unguided loads.
This document covers machinery used in the entertainment industry including machinery that is excluded from the Machinery Directive (2006/42/EC) specifically Article 1, 2(j) which excludes "machinery intended to move performers during artistic performances".
This machinery includes controls, electrical and electronic control systems, electrical and electronic equipment, hydraulic and pneumatic power supplies.
The principles in this document also apply to machinery installations based on new technologies or specially designed installations which are not expressly mentioned here but which nevertheless operate in a similar manner or are meant for similar purposes to the equipment listed above.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
2021-08-10 - TC origine - Improvement of some French Warning messages
- Corrigendum4 pagesEnglish languagesale 10% offe-Library read for1 day