21.060.99 - Other fasteners
ICS 21.060.99 Details
Other fasteners
Weitere Befestigungsmittel
Autres éléments de fixation
Drugi vezni elementi
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 21.060.99 - Other fasteners
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies the mechanical and physical properties of bolts, screws, studs and nuts, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels (i.e. martensitic stainless steels and precipitation hardening austenitic stainless steels) and nickel alloys, intended for use at high temperatures up to 800 °C. Tests in accordance with Clause 9 are performed at the ambient temperature range of 10 °C to 35 °C, and other tests can be performed at higher temperatures, see Clause 10. NOTE Fasteners specified in this document are also suitable when used at low temperatures, typically down to -50 °C. For more information, see ISO 3506-6. The term “fasteners” is used in this document when bolts, screws, studs and nuts are considered all together. ISO 3506-6 provides general rules and additional technical information on suitable stainless steels and nickel alloys as well as their properties. This document applies to fasteners: — with ISO metric thread in accordance with ISO 68-1, — with diameter/pitch combinations in accordance with ISO 261 and ISO 262, — with coarse pitch thread M3 to M39, and fine pitch thread M8×1 to M39×3, — with thread tolerances in accordance with ISO 965-1 and ISO 965-2, and — of any shape but with full loadability. Stainless steel and nickel alloy fastener symbols can be used for sizes outside the diameter limits of this document (i.e. for bolts, screws and studs with d d > 39 mm and for nuts with D D > 39 mm), provided that all applicable chemical, mechanical and physical requirements are met. Fasteners with reduced loadability (i.e. thin nuts and bolts, screws and studs with head or unthreaded shank weaker than the threaded shank) are not dealt with in this document. This document does not specify requirements for functional properties such as: — torque/clamp force properties, — shear strength, — fatigue resistance, — weldability, or — properties of bolted joints and fasteners in high temperature environment (see test methods at high temperature for fasteners in Clause 10).
- Standard43 pagesEnglish languagesale 15% off
- Standard45 pagesFrench languagesale 15% off
- Draft44 pagesEnglish languagesale 15% off
This document provides a test method for determining the bearing capacity (pull out force) of a connection consisting of a screw in a screw thread channel, which cannot be calculated in accordance with current codes or conventional calculations. This document can be applied to screw thread channels used in several products, including doors, windows and curtain walling.
This document is applicable to screw thread channels made out of metal, as well as metal screws.
The pull out forces of such connections can already be assessed indirectly with another test method e.g. wind load resistance for doors/windows according to EN 12211 or curtain walling kits according to EN 12179. Additional information with respect to the mechanical performance of connections and direct applications can be determined with the test method described in this document.
The bearing capacity of non-metallic components under the combination of high temperature and load is not considered in the standard. Additional verifications are performed depending on the type of the non-metallic material used.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides a test method for determining the bearing capacity (pull out force) of a connection consisting of a screw in a screw thread channel, which cannot be calculated in accordance with current codes or conventional calculations. This document can be applied to several products, including doors, windows and curtain walling.
This document applies to screw thread channels made out of metal as well as metal screws.
The pull out forces of such connections may already be assessed indirectly with another test method e.g. wind load resistance for doors/windows according to EN 12211 or curtain walling kits according to EN 12179. Additional information with respect to the mechanical performance of connections and direct applications can be determined with the test method described in this document.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the dimensions and the materials of certain well-established connectors for use in joints between members in load-bearing timber structures.
For data on strength and deformation properties of joints made with the connectors, reference is given to EN 13271.
- Standard47 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the dimensions and the materials of certain well-established connectors for use in joints between members in load-bearing timber structures.
For data on strength and deformation properties of joints made with the connectors, reference is given to EN 13271.
- Standard47 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 2, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly.
This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods.
It provides for the evaluation of conformity of the product to this European Standard.
This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 2, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly. This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods.
It provides for the evaluation of conformity of the product to this European Standard.
This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 23429:2004 specifies gauges for hexagon sockets with tolerances as specified in ISO 4759-1.
- Standard6 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the mechanical and physical properties of bolts, screws, studs and nuts, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels (i.e. martensitic stainless steels and precipitation hardening austenitic stainless steels) and nickel alloys, intended for use at high temperatures up to 800 °C
- Draft49 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the mechanical and physical properties of bolts, screws, studs and nuts, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels (i.e. martensitic stainless steels and precipitation hardening austenitic stainless steels) and nickel alloys, intended for use at high temperatures up to 800 °C
- Draft49 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and performance of mechanical fasteners made of steel, including nails, screws and staples, intended to be used for the fixing of gypsum board in accordance with EN 520, gypsum boards with fibrous reinforcement in accordance with EN 15283-1 and EN 15283-2, composite panels according to EN 13950, products from secondary processing in accordance with EN 14190 and suitable ancillary products, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together.
This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods.
It provides for the evaluation of conformity of the product to this European Standard.
This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than gypsum board and the gypsum based products referred to above and their associated system components.
- Draft32 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and performance of mechanical fasteners made of steel, including nails, screws and staples, intended to be used for the fixing of gypsum board in accordance with EN 520, gypsum boards with fibrous reinforcement in accordance with EN 15283-1 and EN 15283-2, composite panels according to EN 13950, products from secondary processing in accordance with EN 14190 and suitable ancillary products, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together.
This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods.
It provides for the evaluation of conformity of the product to this European Standard.
This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than gypsum board and the gypsum based products referred to above and their associated system components.
- Draft32 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 4, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly.
This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured
according to the corresponding European test methods. It provides for the evaluation of conformity of the product to this European
Standard. This EN also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.
- Draft4 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 4, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly.
This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured
according to the corresponding European test methods. It provides for the evaluation of conformity of the product to this European
Standard. This EN also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.
- Draft4 pagesEnglish languagesale 10% offe-Library read for1 day
TC - Clause 4, 5.4, 6.2, 6.4 - symbols in E and F
- Corrigendum2 pagesEnglish and French languagesale 10% offe-Library read for1 day
This European Standard specifies relationships for the determination of load-carrying capacities of connector joints in timber structures and appertaining reference conditions.
It also gives recommendations for characteristic values for slip moduli for joints in solid timber (in accordance with EN 338) or glued laminated timber (in accordance with EN 1194).
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
TC - Clause 4, 5.4, 6.2, 6.4 - symbols in E and F
- Corrigendum2 pagesEnglish and French languagesale 10% offe-Library read for1 day
This European Standard specifies relationships for the determination of load-carrying capacities of connector joints in timber structures and appertaining reference conditions.
It also gives recommendations for characteristic values for slip moduli for joints in solid timber (in accordance with EN 338) or glued laminated timber (in accordance with EN 1194).
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General
1.1.6 This document relies on characteristic resistances and distances which are stated in a European Technical Specification. In general the design concept is valid in the product dimensions 6 inferior, or equal, to hef/dnom inferior, or equal, to 20. The actual range for a particular fastener may be taken from the relevant European Technical Specification. In minimum the following characteristics should be given in the relevant European Technical Specification as base for the design method of this CEN/TS.
- NRk,s, VRk,s
- (...)
- (...)
- ccr,N, scr,N
- ccr,sp, scr,sp
- cmin, smin
- hmin
- limitations on concrete strength classes of base material
- kcr, kucr, kT, k2, k3, k4, k8
- dnom, hef, lf , limitations on hef/dnom
- yMi, recommended partial factors see CEN/TS 1992-4-1:2009, clause 4
- Technical specification24 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification23 pagesEnglish languagesale 10% offe-Library read for1 day
This document relies on characteristic resistances and distances which are stated in a European Technical Specification. The characteristic values shown in Table 1 should be obtained from the relevant European Technical Specification as base for the design methods of this CEN/TS.
- Technical specification25 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification23 pagesEnglish languagesale 10% offe-Library read for1 day
TC - Addition of Tables A.1, B.1, C.1, C.5, C.10, C.11 and correction in Table A.5
- Corrigendum5 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard was prepared by CEN/TC 124, Timber Structures. This standard is one of a series of standards for building materials. It was prepared by a working group under the convenorship of Deutsches Institut für Normung e.V. (DIN) No existing European Standard is superseeded. This standard includes for Annexes concerning the specifications for different types of ring, plate, toothed-plate and other connectors. The standard contains only well-established connectors which are currently covered by existing National Standards.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard was prepared by CEN/TC 124, Timber Structures. This standard is one of a series of standards for building materials. It was prepared by a working group under the convenorship of Deutsches Institut für Normung e.V. (DIN) No existing European Standard is superseeded. This standard includes for Annexes concerning the specifications for different types of ring, plate, toothed-plate and other connectors. The standard contains only well-established connectors which are currently covered by existing National Standards.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 2, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly.
This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods.
It provides for the evaluation of conformity of the product to this European Standard.
This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 2, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly.
This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods.
It provides for the evaluation of conformity of the product to this European Standard.
This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
TC - Addition of Tables A.1, B.1, C.1, C.5, C.10, C.11 and correction in Table A.5
- Corrigendum5 pagesEnglish languagesale 10% offe-Library read for1 day