This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2020-12-14: Common mods to this EN IEC are included in prAA (PR=73229) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2020-12-14: This prAA represents common mods to EN IEC (PR=73190) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for horizontal directional drills.
A machine is considered a horizontal directional drill if it is designed to drill in a shallow arc for the installation of pipes, conduits, and cables and typically has a drill string entry angle of less than 45° relative to the operating surface of the earth.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering, "deleted text" when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014+A1:2021.
This document does not repeat the requirements from EN 16228 1:2014+A1:2021, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning and tunnelling;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   EN 16228-4:2014+A1:2021 covers machines with a rotary torque greater than 35 kNm.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.
The following machines are excluded from the scope of this document:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to prEN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry;
-   specialized mining machinery and equipment for opencast mining (e.g. rock drill rigs, blast hole drills) (under the scope of CEN/TC 196);
-   all underground mining machinery and equipment for the extraction of solid mineral substances (e. g. rock drill rigs, raise boring machines, shaft boring machines, mining auger boring machines, jumbos) as well as machinery and equipment for underground mine development (under the scope of CEN/TC 196);
-   core drilling machines on stand covered by EN 12348;
-   hand-held machines (in particular machines covered by ISO 11148-5).
This document is not applicable to mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering manufactured before the date of its publication.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3.
This standard does not apply to rotary hammers, even if they can be used as a drill.
This Part 2-1 is to be used in conjunction with the first edition of IEC 62841-1:2014.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication
Key words: Drill, Impact Drill, Hand-held tool, Safety

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies, with reference to ISO 230-1, geometrical tests on general purpose and normal accuracy box type vertical drilling machines. It also specifies the applicable tolerances corresponding to the above‐mentioned tests. This document deals only with the verification of accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.) or to machine characteristics (such as speeds, feeds, etc.), which are generally checked before testing of machine accuracy.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3.
This standard does not apply to rotary hammers, even if they can be used as a drill.
This Part 2-1 is to be used in conjunction with the first edition of IEC 62841-1:2014.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication
Key words: Drill, Impact Drill, Hand-held tool, Safety

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2017-03-16 SW: DOW=DOR+24 m.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62841 applies to transportable drills, with manually fed axial movement of
the spindle, having a maximum chuck capacity of 13 mm.
NOTE 101 Transportable drills are also known as bench drills or drill presses.
This part of IEC 62841 does not apply to stationary drilling machines.
This part of IEC 62841 does not apply to radial arm drills.
This part of IEC 62841 does not apply to magnetic drill stands and drill motors.
NOTE 102 Magnetic drill stands and drill motors will be covered by a future part of IEC 62841-3.
NOTE 103 In Europe (EN 62841-3-13), the following conditions apply:
Radial arm drills and stationary drilling machines are covered by EN 12717.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN 16228-3, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN IEC 62841-3-6 applies to transportable diamond drills, intended to be connected to a liquid system. Liquid system may include liquid from a pipe or container.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN 16228-2, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). In this document the general term “mobile drill rig” covers several different types of machines for use in: - civil engineering; - geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting); - water well drilling; - geothermal installations; - landfill drilling; - underpinning, tunnelling, mining and quarrying; - for use above ground as well as underground.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard contains the requirements for stationary machines for the drilling of flat glass, using a powered rotating tool. Stationary machines are classified into: a) manual; b) semi-automatic; c) automatic single-head or multi-head; d) fully automatic. This European Standard deals with the significant hazards, hazardous situations and events relevant to drilling machines for flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4)." This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. !Safety requirements and/or protective measures are given in Clause 5. When references are made to B level standards such as EN 953, EN 983, EN 999, EN 1037, EN 1088, EN 60204-1, EN ISO 13850 and EN ISO 13857, the manufacturer should carry out an adequate risk assessment for the requirements thereof where choice is necessary.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary drilling machines (see 3.1).
This standard covers both manual and automatic drilling machines. These include but are not limited to:
-   pedestal drilling machines (see figure A.1);
-   radial arm drilling machines (see figure A.2);
-   coordinate table drilling machines (see figure A.3);
-   horizontal spindle drilling machines (see figure A.4);
-   multi-spindle drilling machines (see figure A.5)
-   turret type drilling machines with manual control of turret index.
1.2   This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations.  It presumes access to the machine from all directions.  It describes means to reduce risks to operators and other exposed persons.
1.3   This standard also applies to workpiece transfer devices when they form an integral part of the machine.
1.4   This standard deals with significant hazards relevant to drilling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.5   Hazards arising from other metal working processes (e.g. milling, grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography).
1.6   Automatic drilling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996).
1.7   This standard is not applicable to drilling machines, which were manufactured before the date of publication by CEN of this standard.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to core drilling machines on transportable stands equipped with a diamond core drill bit, usually with a water supply connection device, and intended to drill holes into stone, concrete and similar mineral materials in a stationary position where the power for the tool rotation is supplied by an electrical, hydraulic, pneumatic or internal combustion prime motor.
The feed movement of the drill head and core drill bit may be effected by manual, mechanical or hydraulic means.
This European Standard deals with all significant hazards pertinent to core drilling machines on a stand when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This standard does not apply to:
-   percussive or rotary-percussive rock drills either mounted or unmounted;
-   hand held power drills;
-   hydraulic or pneumatic power supply sources;
-   mobile undercarriages to which machines can be fitted.
This European Standard does not apply to machinery covered by EN 791:1995.
This European Standard covers electrical hazards by making reference to relevant European Standards (see 5.2).
Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment of machinery and that are dealt with in standards for common use are not covered by this European Standard. Reference to pertinent standards of this kind is made where such standards are applicable and so far as is necessary.
In this European Standard, core drilling machines on a stand are called "machines" and diamond core drill bits are called "tools".
NOTE   The term "diamond" is used as a generic word which covers all varieties of abrasive products such as diamond, borum nitride.
This European Standard applies primarily to machines which are manufactured after the date of approval of the standard by CEN.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to core drilling machines on transportable stands equipped with a diamond
core drill bit, usually with a water supply connection device, and intended to drill holes into stone, concrete and
similar mineral materials in a stationary position where the power for the tool rotation is supplied by an
electrical, hydraulic, pneumatic or internal combustion prime motor.
The feed movement of the drill head and core drill bit may be effected by manual, mechanical or hydraulic
means.
This European Standard deals with all significant hazards pertinent to core drilling machines on a stand when
used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard
specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This standard does not apply to:
- percussive or rotary-percussive rock drills either mounted or unmounted;
- hand held power drills;
- hydraulic or pneumatic power supply sources;
- mobile undercarriages to which machines can be fitted.
This European Standard does not apply to machinery covered by EN 791:1995.
This European Standard covers electrical hazards by making reference to relevant European Standards (see
5.2).
Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment of machinery and
that are dealt with in standards for common use are not covered by this European Standard. Reference to
pertinent standards of this kind is made where such standards are applicable and so far as is necessary.
In this European Standard, core drilling machines on a stand are called "machines" and diamond core drill bits
are called “tools”.
NOTE The term "diamond" is used as a generic word which covers all varieties of abrasive products such as
diamond, borum nitride.
This European Standard applies primarily to machines which are manufactured after the date of approval of
the standard by CEN.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary drilling machines (see 3.1).
This standard covers both manual and automatic drilling machines. These include but are not limited to:
-   pedestal drilling machines (see figure A.1);
-   radial arm drilling machines (see figure A.2);
-   coordinate table drilling machines (see figure A.3);
-   horizontal spindle drilling machines (see figure A.4);
-   multi-spindle drilling machines (see figure A.5)
-   turret type drilling machines with manual control of turret index.
1.2   This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations.  It presumes access to the machine from all directions.  It describes means to reduce risks to operators and other exposed persons.
1.3   This standard also applies to workpiece transfer devices when they form an integral part of the machine.
1.4   This standard deals with significant hazards relevant to drilling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.5   Hazards arising from other metal working processes (e.g. milling, grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography).
1.6   Automatic drilling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996).
1.7   This standard is not applicable to drilling machines, which were manufactured before the date of publication by CEN of this standard.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This second edition cancels and replaces the first edition (i. e. ISO 2423 : 1974). Describes both geometrical and pratical tests on these general purpose and normal accurasy radial drilling machines, and gives the corresponding permissible deviations which apply. Deals only with the verification of the accuracy of the machine. Does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or the characteristics (speeds, feeds, etc.), which shall generally be checked before the accurasy is tested.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

Specifies both geomertrical and practical tests on these general purpose and normal accuracy drilling machines, and gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or to characteristics (speeds, feeds, etc.), which shall generally be checked before the accuracy is tested. The most common configurations of these machines are given.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

Specifies the pratical test to be carried out for checking these drilling machines and is a continuation of ISO 2773-1. The annex shows a graph giving the axial force F as a function of the drilling capacity of the machine.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

Specifies both geometrical and practical tests on these general purpose and normal accuracy drilling machines, gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or to characteristics (speeds, feeds, etc.), which small generally be checked before the accuracy is tested.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014.
This document does not repeat the requirements from EN 16228 1, but adds or replaces the requirements for application for horizontal directional drills.
A machine is considered a horizontal directional drill if it is designed to drill in a shallow arc for the installation of pipes, conduits, and cables and typically has a drill string entry angle of less than 45° relative to the operating surface of the earth.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014.
This document does not repeat the requirements from EN 16228 1, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning, tunnelling, mining and quarrying;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   For machines with torque greater than 35 kNm see EN 16228-4 initially.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This amendment enables EN 60745-2-1 to be read with EN 60745-1:2006 * Superseded by EN 60745-2-1:2010

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Superseded by EN 60745-2-1:2010

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Deals with the safety of hand-held motor-operated or magnetically driven electric tools, specific requirements for drills and impact drills. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is applicable,  except as follows: Addition: This  standard applies to drills and impact  drills.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is applicable except as follows:
1.1 Addition:
This standard applies to transportable diamond drills manually fed, intended to be connected to a water supply (water supply may include water source from a pipe or tank or vat).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC request further to D132/C076: 2MV with dop/dow=2009-12-29 - To be ratified as a new edition

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   The general term "Drill Rig" covers several differing types of machines for use in the construction industry, water well drilling industry, mining and quarrying, for use above ground as well as underground and for tunnel construction. The differing tasks determine the choice of drilling method and type of machine. For this reason there are many possible ways to separate drill rigs into different groups, e.g. in accordance with:
-   The task;
-   The drilling method used;
-   The cutting removal method;
-   The type of construction work.
The methods used for drilling can be basically differentiated in percussive and rotary drilling principles.
Percussive drilling is a method by which the hole is produced by crushing the ground or rock at the bottom of the drill-hole by striking it with the drilling tool and removing the cuttings out of the bore-hole.
Rotary drilling is a method in which the drilling tool at the bottom of the borehole is rotated and at the same time, a feed force is applied by a feed system or drill collar. The ground or rock at the bottom of the borehole is crushed or cut by pressure, shear or tensile stress produced by the different drilling tools. The cuttings are periodically or continuously removed out of the bore hole.
Rotary percussive drilling is performed by a piston striking directly on the bit (down the hole hammer drills) or by percussive energy transmitted via a drill string to the bit. The piston is powered by either hydraulic fluid or compressed air.
At the same time the drill bit is rotated either continuously or intermittently.
The cuttings are continuously removed out of the borehole by a flushing medium, air or fluid which is carried to the drilling tool.
Typical examples of drill rigs covered by this standard are:
-   Cable tool drill rig;
-   Pile drill rigs;
-   Pile top drill rig;
-   Raise borer;
-   Reverse circulation drill rig;
-   Rotary and percussive drill rig for underground drilling;
- Rotary and percussive drill rig for surface drilling;
- Rotary drill rig with power swivel;
- Rotary spindle rig;
- Rotary drill rig for underground use.
A casing or a drilling fluid may be used to stabilize the bore hole.
Drill rigs are stationary during drilling. They may move from one place of work to another, under their own power. Self propelled drill rigs may include those mounted on lorries, wheeled chassis, tractors, crawlers, skid bases (pulled by winch). When drill rigs are mounted on lorries, tractors and trailers, or are wheeled based, transportation may be carried out at higher speeds and on public roads. When designing and constructing these units attention is drawn to regulations covering both the drill rig and traffic regulations. The questions of safety and ergonomic criteria in this standard mainly refer to the principal work, e.g. when the machine is stationary and drilling. In many cases the driver is also the operator of the drill rig. This standard deals with the significant hazards pertinent to mechanized drill rigs, when used as intended and under the conditions foreseen by the manufacturer. It specifies requirements of safety concerning the design, construction, operation and maintenance. This standard applies to drill rigs for surface and underground drilling in the tunnelling, mining, construction and water well drilling industries. Casing unitsare also covered by this standard. If the base of a drill rig consists of an excavator, crane, etc. it shall be covered by its own standards to the extent the requirements of this standard are not applicable.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard contains the requirements for stationary machines for the drilling of flat glass, using a powered rotating tool. Fixed machines are classified into:
a)   manual;
b)   semi-automatic;
c)   automatic single-head or multi-head;
d)   fully automatic.
1.2   This European Standard deals with the significant hazards, hazardous situations and events relevant to drilling machines for flat glass when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to elimi-nate or reduce risks arising from the significant hazards during commissioning, the operation and mainte-nance.
1.3   This European Standard does not address the safety requirements for conveyor belts, rollers (see EN 619) or other means of transporting the glass to and from the drilling machine (see e.g. EN 13035-5).
1.4   This European Standard is not applicable to drilling machines which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to core drilling machines on transportable stands equipped with a diamond core drill bit, usually with a water supply connection device, and intended to drill holes into stone, concrete and similar mineral materials in a stationary position where the power for the tool rotation is supplied by an electrical, hydraulic, pneumatic or internal combustion prime motor. The feed movement of the drill head and core drill bit may be effected by manual, mechanical or hydraulic means. This European Standard deals with all significant hazards pertinent to core drilling machines on a stand when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard does not apply to : - percussive or rotary-percussive rock drills either mounted or unmounted; - hand held power drills; - hydraulic or pneumatic power supply sources; - mobile undercarriages to which machines can be fitted This European Standard does not apply to machinery covered by EN 791:1995. This European Standard covers electrical hazards by making reference to relevant European Standards (see 5.2). Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment of
machinery and that are dealt with in standards for common use are not covered by this European Standard. Reference to pertinent standards of this kind is made where such standards are applicable and so far as is necessary. In this European Standard, core drilling machines on a stand are called "machines" and dia-mond core drill bits are called "tools". NOTE: The term "diamond" is used as a generic word which covers all varieties of abrasive products such as diamond, borum nitride. This European Standard applies primarily to machines which are manufactured after the date of approval of the standard by CEN.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to core drilling machines on transportable stands equipped with a diamond core drill bit, usually with a water supply connection device, and intended to drill holes into stone, concrete and similar mineral materials in a stationary position where the power for the tool rotation is supplied by an electrical, hydraulic, pneumatic or internal combustion prime motor. The feed movement of the drill head and core drill bit may be effected by manual, mechanical or hydraulic means. This European Standard deals with all significant hazards pertinent to core drilling machines on a stand when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard does not apply to : - percussive or rotary-percussive rock drills either mounted or unmounted; - hand held power drills; - hydraulic or pneumatic power supply sources; - mobile undercarriages to which machines can be fitted This European Standard does not apply to machinery covered by EN 791:1995. This European Standard covers electrical hazards by making reference to relevant European Standards (see 5.2). Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment of
machinery and that are dealt with in standards for common use are not covered by this European Standard. Reference to pertinent standards of this kind is made where such standards are applicable and so far as is necessary. In this European Standard, core drilling machines on a stand are called "machines" and dia-mond core drill bits are called "tools". NOTE: The term "diamond" is used as a generic word which covers all varieties of abrasive products such as diamond, borum nitride. This European Standard applies primarily to machines which are manufactured after the date of approval of the standard by CEN.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including and dismantling, with arrangements for transport and maintenance) of stationary drilling machines.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The general term "Drill Rig" covers several differing types of machines for use in the construction industry, water well drilling industry, mining and quarrying, for use above ground as well as underground and tunnel construction.  The differing tasks determine the choice of drilling method and type of machine.  For this reason there are many possible ways to seperate drill rigs into different groups, e.g. in accordance with: - the task; - the drilling method used; - the cutting removal method...

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including and dismantling, with arrangements for transport and maintenance) of stationary drilling machines.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is applicable execpt as follows: 1.1. Addition: This European Standard applies to drills and impact drills. Stands for use with drills are not covered by this standard. This standard does not give requirements for the design of the tool to reduce the risks arising from noise and vibration

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is applicable execpt as follows: 1.1. Addition: This European Standard applies to drills and impact drills. Stands for use with drills are not covered by this standard. This standard does not give requirements for the design of the tool to reduce the risks arising from noise and vibration

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Superseded by EN 50144-2-1:1995

  • Standardization document
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off