EN IEC 62841-3-5:2022 applies to band saws intended for cutting wood and analogous materials, plastics and metals, except magnesium. This document does not apply to transportable scroll saws and jig saws with a reciprocating blade. This document applies to band saws having a mass of: - maximum 25 kg for tools capable of being lifted by hand by one person; - maximum 50 kg for tools capable of being lifted by hand by two persons.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2020-12-14: This prAA represents common mods to EN IEC (PR=71053) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, which are relevant to stationary diamond wire saws (stationary diamond mono-wire saws and stationary diamond multi-wire saws), as defined in Clause 3.
Stationary diamond wire saws may be used in quarries or in sawmill for cutting natural stones (e.g. marble, granite), when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document deals only with stationary diamond wire saws using coated diamond wire as tool.
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals all significant hazards that may occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document does not deal with the significant hazards arising by the use of other facilities/devices not described in this document, that may be fitted on the machines or that may be used during the work cycle.
This document does not deal with:
a)   operation under extreme ambient conditions (outside the limits defined in EN 60204-1:2018);
b)   upstream and downstream conveying elements, not integrated with stationary diamond wire saws, for transporting of the work-pieces.
This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, which are relevant to transportable diamond wire saws and cutting operations as defined in Clause 3.
This document deals only with transportable diamond wire saws used in quarries for cutting natural stones (e.g. marble, granite), when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document deals only with transportable diamond wire saws using coated diamond wire as tool.
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals all significant hazards that may occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document does not deal with the significant hazards arising by the use of other facilities/devices not described in this document, that may be fitted on the machines or that may be used during the work cycle.
This document does not deal with:
a)   operation under extreme ambient conditions (outside the limits defined in EN 60204-1:2018);
b)   upstream and downstream conveying elements, not integrated with transportable diamond wire saws, for transporting of the work-pieces.
This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for jig and sabre saws.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for transportable table saws.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for circular saws.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the dimensions and the mechanical characteristics of metal slitting saws, metric series. It applies to the following two types of metal slitting saws: — metal slitting saws with fine teeth; — metal slitting saws with coarse teeth. If there is a need to extend the range or introduce other series of teeth, it is intended that such additions be according to the data given in the graph in Annex A.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

This document specifies all hazards arising from the use of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted), integrated tools and circular saw blades.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for circular saws for measurements of dust emission.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for jig and sabre saws for measurements of dust emission.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is applicable, except as follows:
Addition:
This part of EN 50632 applies to transportable table saws intended to cut wood or wood-based materials.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 2336-2:2006 specifies the dimensions of machine hacksaw blades. It is applicable to single-edge blades of lengths from 300 mm up to 700 mm, the tooth pitch of which is no greater than 8,5 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

ISO 4875-2:2006 specifies the characteristics and dimensions of the various types of metal-cutting band saw blades.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 4875-1:2006 establishes a vocabulary of terms relating to metal-cutting band saw blades.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 15% off

Specifies the dimensions of hand hacksaw blades. It is valid for single edge blades of length equal to 300 mm, the tooth pitch of which is no greater than 1,4 mm.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

This document specifies all hazards arising from the design of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 5. This document does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies all hazards arising from the design of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 5. This document does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 2296:2011 specifies the dimensions and the mechanical characteristics of metal slitting saws, metric series. It applies to the following two types of metal slitting saws: metal slitting saws with fine teeth; metal slitting saws with coarse teeth.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

Deals with the safety of hand-held motor-operated or magnetically driven electric tools, specific requirements for circular saws. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c.tools. This standard does not apply to saws used with abrasive wheels.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies all hazards arising from the design of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 5. This document does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Deals with the safety of hand-held motor-operated or magnetically driven electric tools, specific requirements for circular saws. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c.tools. This standard does not apply to saws used with abrasive wheels.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard is applicable to all hazards arising from the design and use of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. Part 1 of the standard deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shankmounted milling tools. The hazards are listed in clause 5.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the dimensions of machine hacksaw blades. It is valid for single edge blades of length from 300 mm up to 700 mm, the tooth pitch of which is no greater than 8,5 mm.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off

Specifies the mechanical characteristics. It concerns saws with fine teeth (see table 1) and with coarse teeth (see table 2). The ratio between the number of teeth saws with coarse teeth and the number of teeth for saws with fine teeth is 0,5, and specific values have been related to saws diameters and thicknesses. If there is a need to extend the range or introduce other series of teeth,such additions should be in accordance with data given in the annex.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off