IEC TS 63116:2021(E) specifies general requirements for design, installation and maintenance of a lighting system.
A lighting system comprises a set of products. Requirements of the products are specified in product standards. For the general requirements of lighting systems, this document prevails.
Construction of lighting systems can vary in applications. This document is not intended to provide detailed technical specifications for the construction of lighting systems but to specify requirements in general that are necessary for lighting systems.

  • Technical specification
    30 pages
    English language
    sale 15% off
  • Technical specification
    10 pages
    English language
    sale 15% off
  • Technical specification
    8 pages
    English language
    sale 15% off

This part of IEC 61547 which deals with electromagnetic immunity requirements, applies to
lighting equipment which is within the scope of IEC technical committee 34, including
apparatus such as lamps, luminaires, and modules.
Excluded from the scope of this document are:
– components or modules intended to be built into lighting equipment and which are not
end-user replaceable;
– equipment for which the electromagnetic compatibility requirements in the radio-frequency
range are explicitly formulated in other product immunity standards, even if they
incorporate a built-in lighting function.
NOTE Examples of exclusions are:
– equipment with built-in lighting devices for display back lighting, scale illumination and signaling;
– SSL-displays;
– range hoods, refrigerators, freezers;
– photocopiers, projectors;
– electronic switches for fixed installations;
– lighting equipment for road vehicles (within the scope of CISPR 12);
– lighting equipment for aircraft and airfield facilities.
However, in multi-function equipment where the lighting function operates independently from
other functions, the electromagnetic immunity requirements of this document apply to the
lighting function only.
Lighting equipment with a wireless control function are also within the scope of this document.
However, the test is limited to the control of the lighting function only. Radio properties like
frequency stability or spurious emissions are not assessed.
EXAMPLE Colour/light level control via a wireless interface are meant to stay intact after an immunity test.
Also included in the scope of this document is lighting equipment that interfaces with systems
or installations other than common power supply networks.
The requirements of this document are based on the requirements for domestic, commercial
and light-industrial environments as given in IEC 61000-6-1:2016, but modified to lighting
engineering practice.
It can be expected that lighting equipment complying with the requirements of this document
will operate satisfactorily in other environments. In some special cases, measures can be
taken to provide higher immunity. In this document it is impracticable to deal with all these
possibilities. Such requirements can be established by contractual agreement between
supplier and purchaser.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62471-7:2023 specifies an assessment of the photobiological safety of electrical light sources and luminaires in normal use as well as some basic product requirements. It applies to electrical light sources and luminaires that emit radiation predominantly in the visible spectral range (380 nm to 780 nm) and are used to illuminate spaces or objects or used for signalling.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62471-7:2023 specifies an assessment of the photobiological safety of electrical light sources and luminaires in normal use as well as some basic product requirements. It applies to electrical light sources and luminaires that emit radiation predominantly in the visible spectral range (380 nm to 780 nm) and are used to illuminate spaces or objects or used for signalling.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62471-7:2023 specifies an assessment of the photobiological safety of electrical light sources and luminaires in normal use as well as some basic product requirements. It applies to electrical light sources and luminaires that emit radiation predominantly in the visible spectral range (380 nm to 780 nm) and are used to illuminate spaces or objects or used for signalling.
The contents of the corrigendum of June 2023 have been included in this copy.

  • Standard
    65 pages
    English and French language
    sale 15% off

This part of IEC 63356 specifies design parameters and design values of an LED light source
or related interface characteristics.
NOTE 1 Interface characteristics can cover interfaces between the LED light source and the luminaire or the
controlgear, or the LED light source and additional attachments.
NOTE 2 Interfaces can be related to for example electrical, mechanical, or optical aspects.
This document does not cover interchangeability between products from different LED light
source manufacturers.
NOTE 3 Interchangeability is covered by IEC 63356-1.
Lamp caps and lampholders specified in the IEC 60061 series are not within the scope of this
document.
Compliance criteria relating to parameters in this document are covered by IEC 632201 for
safety, or IEC 632212 for performance.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 63356 specifies data sheets of LED lamps and LED modules with a series of
parameters per data sheet for a specific LED light source that enables interchangeability
between products from different LED light source manufacturers.
Compliance criteria relating to data sheet parameters in this document are covered by
IEC 632201 for safety, or IEC 632212 for performance.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the performance requirements of flexible organic light emitting diode
tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general
lighting purposes and designed for being bent during the manufacturing process of curved
luminaires.
The requirements of this document relate only to type testing

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62471-6:2022 IEC 62471:2006/CIE S009:2002. IEC 62471 covers light emitting diodes (LEDs), incandescent, low- and high- pressure gas-discharge, arc and other lamps. It also covers lamps which are designed primarily to emit ultraviolet radiant energy, such as ultraviolet sources intended to excite fluorescence of irradiated materials, for insect light traps, for scientific studies, mineral identification, for non-destructive testing, germicidal irradiation, and other purposes.
This part of IEC 62471 provides the optical radiation safety requirements for ultraviolet lamp products, including UV LED lamp products.
This document provides requirements for:
optical radiation safety assessment and ultraviolet-product risk groups;
user information for safety measures;
appropriate labelling of ultraviolet lamp products.  This document addresses those lamps and lamp products where the ultraviolet emission serves the primary purpose of the product and where more than half of the radiant power emitted between 180 nm and 3 000 nm is in the spectral region 180 nm to 400 nm. If more than half of the optical radiation emitted between 180 nm and 3 000 nm is outside of the spectral region 180 nm to 400 nm, then the base standard IEC 62471 should be used. This document covers medical diagnostic and cosmetic devices/products that emit primarily UV radiation.

  • Standard
    104 pages
    English and French language
    sale 15% off

IEC 62471-4:2022, which is a Technical Report, provides manufacturers, test houses, safety personnel and others with practical guidance on methods to perform radiometric and spectroradiometric measurements to determine the level of accessible optical radiation emitted by lamps and lamp systems in accordance with IEC 62471.

  • Technical report
    63 pages
    English language
    sale 15% off

IEC PAS 63313:2021 The safety advice in this document applies to UV-C sources and UV-C products which emit in the wavelength range of 180 nm to 280 nm.
Not within the scope are:
- devices having their own product safety standard, such as IEC 60335-2-109 applicable to UV-C water disinfection equipment and IEC 60335-2-65 applicable to UV-C air disinfection equipment
- application environments of UV-C devices
- products combining UV-C irradiance with chemicals and additives
- products that do not emit UV-C radiation such as UV-A, UV-B and near-UV devices
- requirements for performance and functional characteristics
- requirements for preventing material degradation and material damage

  • Technical specification
    16 pages
    English language
    sale 15% off

IEC TS 63105:2021(E) establishes terms and definitions in the field of lighting systems and related equipment.
Terminological literature for other fields of lighting is listed in the bibliography.

  • Technical specification
    9 pages
    English language
    sale 15% off

This document describes the method of measuring, evaluating and specifying the UV irradiation
characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes.
It includes specific requirements regarding the marking of such lamps.
These requirements relate only to type testing.
Lamps complying with the requirements of this document comply with the electrical and
mechanical safety requirements of IEC 61195 and IEC 61199 with the exception of the
requirements for maximum limits of UV radiation.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61228:2020 is available as IEC 61228:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61228:2020 describes the method of measuring, evaluating and specifying the UV irradiation characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - maintenance code: description of the depreciation of the UV irradiance lamp during operation; - operating position: information added for single capped lamps; - spectroradiometric measuring system: new information about distance between sensor and lamp axis; - measurement and evaluation procedure: separated detailed information for double capped fluorescent UV lamps and single capped fluorescent UV lamps; - Annex C (normative), Method of test for irradiance maintenance: new information added; - Annex D (normative), Reflector gauge: new information added; - Annex E (normative), Lamp datasheets for measurement: complementary information added.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61547:2020 is available as IEC 61547:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61547:2020 which deals with electromagnetic immunity requirements, applies to lighting equipment which is within the scope of IEC technical committee 34, including apparatus such as lamps, luminaires, and modules. This third edition cancels and replaces the second edition, published in 2009. This edition constitutes a technical revision This edition includes the following significant technical changes with respect to the previous edition: - extension of scope with end-user replaceable modules and the combination of end-user replaceable module and independent auxiliary; - clarification of module testing in a host system; - increased ESD and surge test levels for road and street lighting equipment; - the introduction of ESD testing under normal operation and handling conditions; - removal of line to ground surge test for self-ballasted lamps ≤ 25 W.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61228:2020 is available as IEC 61228:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61228:2020 describes the method of measuring, evaluating and specifying the UV irradiation characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- maintenance code: description of the depreciation of the UV irradiance lamp during operation;
- operating position: information added for single capped lamps;
- spectroradiometric measuring system: new information about distance between sensor and lamp axis;
- measurement and evaluation procedure: separated detailed information for double capped fluorescent UV lamps and single capped fluorescent UV lamps;
- Annex C (normative), Method of test for irradiance maintenance: new information added;
- Annex D (normative), Reflector gauge: new information added;
- Annex E (normative), Lamp datasheets for measurement: complementary information added.

  • Standard
    38 pages
    English and French language
    sale 15% off

This document specifies methods of measurement of electrical power consumption in nonactive
mode(s), as applicable for electrical lighting equipment. This includes electrical lighting
equipment incorporating non-illumination components.
This document specifies neither performance requirements nor limits on power consumption.
This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC
or up to 1 000 V AC.
This document is intended to be referenced by lighting equipment product standards for the
measurement of non-active mode power consumption. Details for the non-active mode power
consumption measurement and data presentation are specified in the product standards.
NOTE Annex A provides guidance on details specified in product standards.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63103:2020(E) specifies methods of measurement of electrical power consumption in non-active mode(s), as applicable for electrical lighting equipment. This includes electrical lighting equipment incorporating non-illumination components. This document specifies neither performance requirements nor limits on power consumption. This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC or up to 1 000 V AC. This document is intended to be referenced by lighting equipment product standards for the measurement of non-active mode power consumption. Details for the non-active mode power consumption measurement and data presentation are specified in the product standards.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63103:2020 specifies methods of measurement of electrical power consumption in non-active mode(s), as applicable for electrical lighting equipment. This includes electrical lighting equipment incorporating non-illumination components.
This document specifies neither performance requirements nor limits on power consumption.
This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC or up to 1 000 V AC.
This document is intended to be referenced by lighting equipment product standards for the measurement of non-active mode power consumption. Details for the non-active mode power consumption measurement and data presentation are specified in the product standards.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    66 pages
    English and French language
    sale 15% off

IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having: - a rated power up to 60 W; - a rated voltage of > 50 V a.c. up to 250 V a.c.; - a lamp cap as listed in IEC 62560. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC/PAS 62612. a) The standard explicitly states that real life time tests are not part of the test regime. Instead, a period of up to 6 000 h is chosen in order to assess manufacturers' claims of maintenance. b) Technical features have been adapted to IEC/PAS 62717 (performance of LED modules) as far as possible. Examples are the family approach and the temperature measuring point. c) Marking requirements are shifted from the product to the packaging. d) The number of lamps to be tested is made test specific, not general. e) First requirements are given for setting the colour for colour adjustable lamps and the luminous flux level of dimmable lamps. f) The structure of tests is clearly divided between requirement and compliance. g) Statistical compliance is separated into individual and average. h) Light output requirements are extended to luminous intensity distribution, peak intensity, beam angle and efficacy. i) The use of the terms 'correlated colour temperature' and 'chromaticity coordinates' is corrected. j) The number of tolerance categories is reduced from 8 to 4, and split between initial and maintained values. k) Colour rendering is differently assessed at initial and maintained state. l) Three lumen maintenance categories are given instead of five. m) The endurance tests are completely re-established. n) The verification (formerly: assessment) clause is completed. o) Information for luminaire design is added. p) Stabilisation is more precise (Annex A on the method of measuring lamp characteristics) and extension is made for the additional photometric and colorimetric parameters. q) Annex B on measuring luminous flux is contained in Annex A. New Annex B provides the photometric code. r) Further annexes are added: Annex C and D for displacement factor, Annex E for life time metrics/reliability and Annex F for examples of LED dies and LED packages.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2017-06-08: Final decision is to publish A1 and A11 separately the same day. A1 is identical to IEC A1.
2017-05-31: D156/039: to be published
2017-05-04: Publication on the hold pending TC 34A reply about A11 (pr=58955)
2015-11-18 - CLC/TC 34A request that A1 is published together with the European Amendment A11 (WI 58955).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63129:2020 describes a method, based on measurements combined with calculations, to determine specific characteristics of the inrush current of single and/or multiple lighting products of the same type. Lighting products include the following:  light sources with integrated controlgear, controlgear, luminaires.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63129:2020 describes a method, based on measurements combined with calculations, to determine specific characteristics of the inrush current of single and/or multiple lighting products of the same type. Lighting products include the following:
light sources with integrated controlgear,
controlgear,
luminaires.

  • Standard
    37 pages
    English and French language
    sale 15% off

IEC 61547:2020 is available as IEC 61547:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61547:2020 which deals with electromagnetic immunity requirements, applies to lighting equipment which is within the scope of IEC technical committee 34, including apparatus such as lamps, luminaires, and modules. This third edition cancels and replaces the second edition, published in 2009. This edition constitutes a technical revision This edition includes the following significant technical changes with respect to the previous edition:
- extension of scope with end-user replaceable modules and the combination of end-user replaceable module and independent auxiliary;
- clarification of module testing in a host system;
- increased ESD and surge test levels for road and street lighting equipment;
- the introduction of ESD testing under normal operation and handling conditions;
- removal of line to ground surge test for self-ballasted lamps ≤ 25 W.

  • Standard
    41 pages
    English and French language
    sale 15% off

IEC TR 63139:2018(E) is related to the insulation coordination in TC 34 standards and provides explanations on mathematical addition of working voltages, insulation between circuits, use of protective extra low voltage (PELV) and insulation between LV supply and control line conductors in order to cover new technologies associated with the use of LED light sources and controllable products.
It describes in which way the addition of supply voltages and working voltages can be arranged for an assessment of the electrical insulation requirements (e.g. creepage distances and clearances) in a system if a first failure occurs.

  • Technical report
    20 pages
    English language
    sale 15% off

This European Standard specifies the required data for lamps and luminaires for the verification of conformity to the requirements of EN 12464-1 and EN 12464-2. It also specifies data that are commonly used for lighting of indoor and outdoor work places. When these data are provided, they should conform to this document.
An increasing number of luminaires mainly those with LED are luminaires with non-replaceable light sources. Therefore data should always be given for luminaires. For luminaires with replaceable lamps, lamp data should also be provided.
NOTE   Product, safety and performance data can be found in CENELEC documents (see Bibliography).

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC TR 63130:2018(E) describes the current state of experts’ opinions on the standardization of metal halide lamps to cover the relevant parameters for hot restrike and for dimming in combination with low frequency square wave ballasts. It provides guidelines for supplementing or modifying IEC 61167 in order that these conditions are covered.

  • Technical report
    14 pages
    English language
    sale 15% off

IEC TR 63158:2018(E) describes an objective stroboscopic effect visibility (SVM) meter, which can be applied for performance testing of lighting equipment under different operational conditions.
The stroboscopic effects considered in this document are limited to the objective assessment by a human observer of visible stroboscopic effects of temporal light modulation of lighting equipment in general indoor applications, with typical indoor light levels (> 100 lx) and with moderate movements of an observer or nearby handled object ( The contents of the corrigendum of July 2018 have been included in this copy.

  • Technical report
    35 pages
    English language
    sale 15% off

2017-06-08: Final decision is to publish A1 and A11 separately the same day. A1 is identical to IEC A1.
2017-05-31: D156/039: to be published
2017-05-04: Publication on the hold pending TC 34A reply about A11 (pr=58955)
2015-11-18 - CLC/TC 34A request that A1 is published together with the European Amendment A11 (WI 58955).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the safety and interchangeability requirements together with the test
methods and conditions required to show compliance of non-integrated tubular LED lamps,
intended for general lighting purposes, having:
• a rated wattage up to 70 W,
• a rated voltage up to 190 V ripple free DC,
• GX16t-5 cap as listed in Table 1.
The requirements of this document relate only to type testing.
NOTE 1 Where in this document the term “lamp(s)” is used, it is understood to stand for “non-integrated GX16t-5
capped tubular LED-lamp(s)”, except where it is obviously assigned to other types of lamps.
NOTE 2 The lamp specified in this document is operated with a controlgear specified in Annex B. See Clause 18.
NOTE 3 This document includes photobiological safety.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having:  - a rated power up to 60 W;  - a rated voltage of > 50 V a.c. up to 250 V a.c.;  - a lamp cap as listed in IEC 62560. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC/PAS 62612.  a) The standard explicitly states that real life time tests are not part of the test regime. Instead, a period of up to 6 000 h is chosen in order to assess manufacturers' claims of maintenance.  b) Technical features have been adapted to IEC/PAS 62717 (performance of LED modules) as far as possible. Examples are the family approach and the temperature measuring point.  c) Marking requirements are shifted from the product to the packaging.  d) The number of lamps to be tested is made test specific, not general.  e) First requirements are given for setting the colour for colour adjustable lamps and the luminous flux level of dimmable lamps.  f) The structure of tests is clearly divided between requirement and compliance.  g) Statistical compliance is separated into individual and average.  h) Light output requirements are extended to luminous intensity distribution, peak intensity, beam angle and efficacy.  i) The use of the terms 'correlated colour temperature' and 'chromaticity coordinates' is corrected.  j) The number of tolerance categories is reduced from 8 to 4, and split between initial and maintained values.  k) Colour rendering is differently assessed at initial and maintained state.  l) Three lumen maintenance categories are given instead of five.  m) The endurance tests are completely re-established.  n) The verification (formerly: assessment) clause is completed.  o) Information for luminaire design is added.  p) Stabilisation is more precise (Annex A on the method of measuring lamp characteristics) and extension is made for the additional photometric and colorimetric parameters.  q) Annex B on measuring luminous flux is contained in Annex A. New Annex B provides the photometric code.  r) Further annexes are added: Annex C and D for displacement factor, Annex E for life time metrics/reliability and Annex F for examples of LED dies and LED packages.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62707 specifies general requirements, a grid and a corresponding code for
the colour binning of white LED packages emitting incoherent, visible radiation. It applies for
LED packages.
Other parts of the IEC 62707 series covering chromaticity of coloured LED packages,
luminous flux/luminous intensity, colour rendering and forward voltage are in preparation or
under consideration.
NOTE 1 This International Standard does not apply for LED modules, LED lamps and LED luminaires.
NOTE 2 Even though the words "white light" are used, the purpose of this International Standard is not to define
"white light", but to specify a grid and a corresponding colour code for the colour binning of white LED packages
emitting incoherent, visible radiation. The area covered by the grid may differ from the definition of white light given
in other standards or regulations.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having: - a rated power up to 60 W; - a rated voltage of > 50 V a.c. up to 250 V a.c.; - a lamp cap as listed in IEC 62560. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC/PAS 62612. a) The standard explicitly states that real life time tests are not part of the test regime. Instead, a period of up to 6 000 h is chosen in order to assess manufacturers' claims of maintenance. b) Technical features have been adapted to IEC/PAS 62717 (performance of LED modules) as far as possible. Examples are the family approach and the temperature measuring point. c) Marking requirements are shifted from the product to the packaging. d) The number of lamps to be tested is made test specific, not general. e) First requirements are given for setting the colour for colour adjustable lamps and the luminous flux level of dimmable lamps. f) The structure of tests is clearly divided between requirement and compliance. g) Statistical compliance is separated into individual and average. h) Light output requirements are extended to luminous intensity distribution, peak intensity, beam angle and efficacy. i) The use of the terms 'correlated colour temperature' and 'chromaticity coordinates' is corrected. j) The number of tolerance categories is reduced from 8 to 4, and split between initial and maintained values. k) Colour rendering is differently assessed at initial and maintained state. l) Three lumen maintenance categories are given instead of five. m) The endurance tests are completely re-established. n) The verification (formerly: assessment) clause is completed. o) Information for luminaire design is added. p) Stabilisation is more precise (Annex A on the method of measuring lamp characteristics) and extension is made for the additional photometric and colorimetric parameters. q) Annex B on measuring luminous flux is contained in Annex A. New Annex B provides the photometric code. r) Further annexes are added: Annex C and D for displacement factor, Annex E for life time metrics/reliability and Annex F for examples of LED dies and LED packages.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for lamps, EN 50625-2-1, and the Technical Specification CLC/TS 50625-3-1:2014 for de-pollution - General.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62471-5:2015 provides a risk group classification system for image projectors, and measurement conditions for optical radiation emitted by image projectors. It includes manufacturing requirements that may be required as a result of an image projector system being assigned to a particular risk group. Therefore, this part of IEC 62471 provides safety requirements for lamp systems that are intended to produce projected visible optical radiation, such as theatre projectors, data projectors and home-use projectors. The assigned risk group of a projector product also may be used by projector manufacturers to assist with any risk assessments, e.g. for occupational exposure in workplaces. National requirements may exist for the assessment of products or occupational exposure.

  • Standard
    104 pages
    English and French language
    sale 15% off

This International Standard specifies the safety and interchangeability requirements, and the
exchange operation together with the test methods and conditions required to show
compliance of double-capped LED lamps with G5 and G13 caps, intended for replacing
fluorescent lamps with the same caps, having:
– a rated power up to 125 W;
– a rated voltage of up to 250 V.
Such LED lamps are designed for replacement without requiring any internal modification of
the luminaire.
The existing luminaires, into which the double-capped LED lamps are fitted, can be operated
with electromagnetic or electronic controlgear.
The requirements of this standard relate only to type testing.
Recommendations for whole product testing or batch testing are given in Annex A.
NOTE 1 Where in this standard the term “lamp(s)” is used, it is understood to stand for “double-capped retrofit
LED lamp(s)”, except where it is obviously assigned to other types of lamps.
This standard does not cover double-capped conversion LED lamps where modification in the
luminaire is required. The requirements in this standard are given for general lighting service
(excluding for example explosive atmospheres). For lamps for other applications additional
requirements may apply.
NOTE 2 This standard includes photobiological safety.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC TR 62471-3:2015(E) which is a technical report, provides guidelines for the safe use of intense pulsed light (IPL) source equipment in professional premises. It describes possible adverse incidents that may occur in respect of the use of IPL devices and recommends measures to avoid them. IEC TR 62471-3:2015 sets out the control measures recommended for the safety of recipients of IPL treatment, staff, service, maintenance personnel and others. Engineering controls which form part of the IPL equipment or the installation are also briefly described to provide an understanding of the general principles of protection.

  • Technical report
    30 pages
    English language
    sale 15% off