This handbook is an acceptable way of meeting the requirements of adhesive materials in bonded
joints of EN 16603-32 (equivalent to ECSS‐E‐ST‐32).

  • Technical report
    458 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This handbook is an acceptable way of meeting the requirements of adhesive materials in bonded
joints of EN 16603-32 (equivalent to ECSS‐E‐ST‐32).

  • Technical report
    458 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The scope of the document addresses the generic verification for all types of adhesive bonding for space applications including evaluation phases. It specifies all aspects of the adhesive bonding lifetime such as assembly, integration and testing, on-ground acceptance testing, storage, transport, pre-launch, launch and in-flight environments.
This standard does not cover requirements for:
-   adhesive bonding used in EEE mounting on printed circuit boards (ECSS-Q-ST-70-61)
-   adhesive bonding used in hybrid manufacturing (ESCC 2566000)
-   adhesive bonding for cover-glass on solar cell assemblies (ECSS-E-ST-20-08)
-   design of adhesive joint
-   long term storage and long term storage sample testing
-   performance of adhesive bond
-   functional properties of adhesive joint
•   co-curing processes
This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The scope of the document addresses the generic verification for all types of adhesive bonding for space applications including evaluation phases. It specifies all aspects of the adhesive bonding lifetime such as assembly, integration and testing, on-ground acceptance testing, storage, transport, pre-launch, launch and in-flight environments.
This standard does not cover requirements for:
-   adhesive bonding used in EEE mounting on printed circuit boards (ECSS-Q-ST-70-61)
-   adhesive bonding used in hybrid manufacturing (ESCC 2566000)
-   adhesive bonding for cover-glass on solar cell assemblies (ECSS-E-ST-20-08)
-   design of adhesive joint
-   long term storage and long term storage sample testing
-   performance of adhesive bond
-   functional properties of adhesive joint
•   co-curing processes
This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the test method for determining the expansion ratio and the volatile content in structural foaming adhesive films.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the test method for determining the expansion ratio and the volatile content in
structural foaming adhesive films.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the test method for determining the bond strength of structural foaming adhesive films or pastes by means of the tube test method.
This test method is suitable for determining bond strength in relation to the density after curing of the adhesive foam by means of compressive tube shear specimens.
It preferably applies to high expansion ratios, i.e.  50 % measured according to the method EN 2667-3.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the test method for determining the bond strength of structural foaming adhesive films or pastes by means of the tube test method.
This test method is suitable for determining bond strength in relation to the density after curing of the adhesive foam by means of compressive tube shear specimens.
It preferably applies to high expansion ratios, i.e.  50 % measured according to the method EN 2667-3.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements relating to anaerobic polymerisable threadlocking compounds having a torque strength of 19 Nm for aerospace applications.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements relating to anaerobic polymerisable threadlocking compounds having a torque strength of 2 Nm for aerospace applications.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the requirements for manufacture, qualification, inspection and testing of products in structural adhesive systems where the adhesive is supplied in the form of a paste, either a one-part or two-part system, for aerospace applications. The adhesive may be used in conjunction with a primer whose requirements are also included in this European Standard. It is applicable whenever referenced on a material standard.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements relating to anaerobic polymerisable threadlocking compounds having a torque strength of 16 Nm for aerospace applications.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements relating to anaerobic polymerisable threadlocking compounds having a torque strength of 16 Nm for aerospace applications.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the requirements for manufacture, qualification, inspection and testing of products in structural adhesive systems where the adhesive is supplied in the form of a paste, either a one part or two part system, for aerospace applications. The adhesive may be used in conjunction with a primer whose requirements are also included in this European Standard. It is applicable whenever referenced on a material standard.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements relating to anaerobic polymerisable threadlocking compounds having a torque strength of 19 Nm for aerospace applications.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements relating to anaerobic polymerisable threadlocking compounds having a torque strength of 2 Nm for aerospace applications.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of drying residues (solid content) (Method A) and residues after ignition (corrosion inhibitor content) (Method B) of primers for aerospace applications.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of shear stress and shear strain behaviour of structural adhesives by testing in tension metal to metal lap joints, at ambient or other temperatures.
This method can also be used to investigate the influence of environmental exposures on structural adhesives.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The objective of this standard is to establish the test methods for defining the strength of suitable structural adhesives in metal to metal single lap shear, at ambient and other temperatures.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to metal  joints, at ambient or other temperatures.
This method is not suitable for adhesives having an average peeling strength of less than 30 N per 25 mm.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of strength of structural adhesives by testing in tension metal to honeycomb core joints, at ambient or other temperatures.
Two types of test pieces are defined:
Type A: direct bonding of honeycomb to facing blocks;
Type B: bonding of honeycomb between the two facing sheets, then bonding of the whole to the facing blocks.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to honeycomb core joints, at ambient or other temperatures.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of resistance of structural adhesives and adhesive bonded joints against environmental influences.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The objective of this standard is to establish the test methods for defining the strength of suitable structural adhesives in metal to metal single lap shear, at ambient and other temperatures.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to metal  joints, at ambient or other temperatures.
This method is not suitable for adhesives having an average peeling strength of less than 30 N per 25 mm.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of strength of structural adhesives by testing in tension metal to honeycomb core joints, at ambient or other temperatures.
Two types of test pieces are defined:
Type A: direct bonding of honeycomb to facing blocks;
Type B: bonding of honeycomb between the two facing sheets, then bonding of the whole to the facing blocks.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to honeycomb core joints, at ambient or other temperatures.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of resistance of structural adhesives and adhesive bonded joints against environmental influences.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the general requirements for the determination of shear stress and shear strain behaviour of structural adhesives by testing in tension metal to metal lap joints, at ambient or other temperatures.
This method can also be used to investigate the influence of environmental exposures on structural adhesives.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the test methods for determining the water absorption of foaming structural adhesives when exposed to high humidity or immersed in water.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the test methods for determining the water absorption of foaming structural adhesives when exposed to high humidity or immersed in water.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the test methods for the determination of the primer thickness for structural adhesives.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the test methods for the determination of the primer thickness for structural adhesives.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the test method for the determination of the peeling strength of structural adhesives on metal to honeycomb core at ambient and other temperatures.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies ageing tests for determining resistance of adhesive bonded joints against environmental influences.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the test methods for the determination of the strength of structural adhesives on metal-honeycomb structures flatwise tensile at ambient and other temperatures.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the dimensions of the test samples and the test method for the determination of the strength of structural adhesives in metal to metal peel at ambient and other temperatures. This test procedure is not suitable for adhesives having an average peeling strength of less than 30 N per 25 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies ageing tests for determining resistance of adhesive bonded joints against environmental influences.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the test method for the determination of the peeling strength of structural adhesives on metal to honeycomb core at ambient and other temperatures.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the dimensions of the test samples and the test method for the determination of the strength of structural adhesives in metal to metal peel at ambient and other temperatures. This test procedure is not suitable for adhesives having an average peeling strength of less than 30 N per 25 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the test methods for the determination of the strength of structural adhesives on metal-honeycomb structures flatwise tensile at ambient and other temperatures.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day