iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

49.030.01 - Fasteners in general

ICS 49.030.01 Details

Fasteners in general

Befestigungsmittel fur Luft- und Raumfahrttechnik im allgemeinen

Éléments de fixation en général

Vezni elementi na splošno

General Information

Parent
49.030 - Fasteners for aerospace construction

e-Library Subscription

Create subscription and get permanent access to documents within 49.030.01 - Fasteners in general

Type
Monthly Subscription
for
seat
×
$ 113.59
$ 113.59

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
CEN
EN 4853:2022(Main)
Aerospace series - Externally threaded fastener, 100° countersunk normal head, Spiral Drive Recess - Classification: 1 100 MPa (at ambient temperature)/425 °C
SIST EN 4853:2022

This document specifies the characteristics of externally threaded fasteners, 100° countersunk normal head, Spiral Drive Recess, for aerospace applications.
Classification: 1 100 MPa /425 °C .

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17603-32-23:2022(Main)
Space engineering - Threaded fasteners handbook
CEN/TR 17603-32-23:2022

The users of this document are engineers involved in design, analysis or verification of joints on structures used for space missions. It is a guidelines document; therefore it includes advisory information rather than requirements.This document is intended to be applicable to any type of joint that is mechanically connected by threaded fasteners (e.g. bolts, screws, etc). It is written for joints made from metallic materials. However, subject to the engineering judgement of the user, many of the procedures presented herein may be applicable to joints made from composite materials.

  • Technical report
    234 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4853:2022(Main)
Aerospace series - Externally threaded fastener, 100° countersunk normal head, Spiral Drive Recess - Classification: 1 100 MPa (at ambient temperature)/425 °C
EN 4853:2022

This document specifies the characteristics of externally threaded fasteners, 100° countersunk normal head, Spiral Drive Recess, for aerospace applications.
Classification: 1 100 MPa /425 °C .

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 4580:2021(Main)
Aerospace — Drives, internal, TORX® PARALOBE® driver bit — Geometrical definition, gaging and technical requirements

This document specifies basic dimensions, characteristics and engineering requirements for TORX® PARALOBE® driver bits used with aerospace fasteners.

  • Standard
    9 pages
    English language
    sale 15% off
  • Draft
    9 pages
    English language
    sale 15% off
ISO
ISO 4579:2021(Main)
Aerospace — Drives, internal, TORX® PARALOBE® drive — Geometrical definition, gaging and technical requirements

This document specifies basic dimensions, characteristics and engineering requirements for TORX® PARALOBE® recesses in aerospace fasteners.

  • Standard
    7 pages
    English language
    sale 15% off
  • Draft
    7 pages
    English language
    sale 15% off
SIST
SIST EN 7010:2020(Main)
Aerospace series - Configuration - Definition and designation for product standards for externally threaded fasteners
EN 7010:2020

EN 7010 is the configuration master for the content and structure of externally threaded fastener product standards.This document- defines the content of externally threaded fastener product standards;- is referenced in product standards;- defines part numbering and title.This configuration master defines externally threaded fasteners, metric and inch series.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4609:2020(Main)
Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements
EN 4609:2019

This document specifies dimensions, tolerances, characteristics and qualification requirements for MORTORQ Spiral Drive Recesses1.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3220:2019(Main)
Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30 mm
EN 3220:2019

This document specifies the requirements relating to:
Heat resisting nickel base alloy (Ni-P101HT)
Cold worked and softened
Bar and wire for continuous forging or extrusion for fasteners
3 mm ≤ D ≤ 30 mm
for aerospace applications.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2952:2019(Main)
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1 270 MPa ≤ Rm ≤ 1 550 MPa
EN 2952:2019

This European Standard specifies the requirements relating to:
Heat resisting alloy NI-PH2601
Solution treated and cold worked
Bar for forged fasteners
D ≤ 50 mm
1 270 MPa ≤ Rm ≤ 1 550 MPa
for aerospace applications.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4710-03:2019(Main)
Aerospace series - Quick release fastening systems for non-structural applications - Part 03: Spring clamp
EN 4710-03:2018

This standard specifies the dimensions, mass, tolerances and static values of catch spring for use in fuselage interior equipment and non-structural or secondary structural area. This standard part shall be used in conjunction with EN 4710-06 and EN 4710-07 as described in EN 4710-02.
The applicable temperature range is −55 °C to 85 °C.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4710-01:2019(Main)
Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification
EN 4710-01:2018

This European Standard specifies the required characteristics, inspections, tests, quality assurance requirements, conditions for qualification acceptance and delivery of quick release fastening systems.
This European Standard applies to all fastening systems for use in fuselage interior equipment and non-structural or secondary structural area.
It may be applied when referred to in the product standard or in a design specification.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4710-004:2015(Main)
Aerospace series - Quick release fastening systems for non-structural applications - Part 004: Spring clamp - One way tolerance compensation
EN 4710-04:2015

This European Standard specifies the dimensions, mass, tolerances and static values of catch spring for
use in fuselage interior equipment and non-structural or secondary structural area.
This European Standard is to be used in conjunction with EN 4710-06 and EN 4710-07 as described in
EN 4710-02.
The applicable temperature range is -55 °C to 85 °C.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4710-005:2015(Main)
Aerospace series - Quick release fastening systems for non-structural applications - Part 005: Spring clamp - Two ways tolerance compensation
EN 4710-05:2015

This European Standard specifies the dimensions, mass, tolerances and static values of catch spring for
use in fuselage interior equipment and non-structural or secondary structural area.
This European Standard is to be used in conjunction with EN 4710-06 and EN 4710-07 as described in
EN 4710-02.
The applicable temperature range is -55 °C to 85 °C.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4710-007:2015(Main)
Aerospace series - Quick release fastening systems for non-structural applications - Part 007: Retaining grommet
EN 4710-07:2015

This European Standard specifies the dimensions, mass and tolerances of the retaining grommet for use
in fuselage interior equipment and non-structural or secondary structural area.
This European Standard is to be used in conjunction with EN 4710-06 as described in EN 4710-02.
The applicable temperature range is -55 °C to 85 °C.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-46:2014(Main)
Space product assurance - Requirements for manufacturing and procurement of threaded fasteners
SIST EN 16602-70-46:2015

This Standard defines the requirements for manufacturing, provision, inspection and quality control of high­quality threaded fastening
devices (bolts, nuts, studs and screws) hereafter referred to as threaded fasteners or fasteners, used in space hardware.
This Standard does not include a complete review of the factors relevant to the fabrication of high quality threaded fasteners. It provides
the definition of the technical requirements and quality control procedures to be applied in the fabrication and supply of threaded
fasteners for spacecraft applications.
Fasteners for spacecraft applications are those aerospace standard fasteners (i.e. in accordance with LN, DIN or other national or international aerospace standards), or those fasteners meeting or exceeding the requirements in ISO 4759 1 for “Product grade A”, which also fulfil the requirements for space applications as specified in the present document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16602-70-46:2015(Main)
Space product assurance - Requirements for manufacturing and procurement of threaded fasteners
EN 16602-70-46:2014

This Standard defines the requirements for manufacturing, provision, inspection and quality control of high­quality threaded fastening
devices (bolts, nuts, studs and screws) hereafter referred to as threaded fasteners or fasteners, used in space hardware.
This Standard does not include a complete review of the factors relevant to the fabrication of high quality threaded fasteners. It provides
the definition of the technical requirements and quality control procedures to be applied in the fabrication and supply of threaded
fasteners for spacecraft applications.
Fasteners for spacecraft applications are those aerospace standard fasteners (i.e. in accordance with LN, DIN or other national or international aerospace standards), or those fasteners meeting or exceeding the requirements in ISO 4759 1 for “Product grade A”, which also fulfil the requirements for space applications as specified in the present document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3911:2014(Main)
Aerospace series - Six lobe recess - Geometrical definition
EN 3911:2010

This European Standard specifies the dimensions and tolerances of a six lobe recess.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3911:2010(Main)
Aerospace series - Six lobe recess - Geometrical definition
SIST EN 3911:2014

This European Standard specifies the dimensions and tolerances of a six lobe recess.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4473:2010(Main)
Aerospace series - Aluminium pigmented coatings for fasteners - Technical specification
EN 4473:2010

This European Standard defines the qualification test conditions for aluminium pigmented coatings applicable to fasteners in titanium, titanium alloys, nickel base alloys and corrosion resisting steels. The aluminium pigmented coatings are not applicable to fasteners in non-corrosion resistant steels. Temperature class: 315 °C. Type I : Coating with chromate and a cetyl alcohol lubricant. Type II : Coating without chromate and an cetyl alcohol lubricant. Type III : Coating with chromate, no additional lubricant. Type IV : Coating without chromate, no additional lubricant.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3782:2008(Main)
Aerospace series - Holes for 100° countersunk head screws - Design standard
SIST EN 3782:2008

This standard specifies holes in common parts and sheet metal for 100° countersunk head screws with nominal diameters of 3 mm to 5 mm and head configuration according to EN standards for aerospace applications.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3043:2008(Main)
Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification
SIST EN 3043:2008

This standard specifies the technical and quality assurance requirements for externally threaded fasteners in material FE-PA92HT (A286) of tensile strength class 900 MPa at room temperature, maximum test temperature of material 650 °C.
The externally threaded fasteners specified here may be manufactured by machining from bar or by forging at the manufacturer's option, if forged there is no requirement for control of grain flow.
Primarily for aerospace applications it is applicable to such externally threaded fasteners when referenced on the product standard or drawing.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3201:2008(Main)
Aerospace series - Holes for metric threaded fasteners - Design standard
SIST EN 3201:2008

This standard provides particulars of hole sizes, chamfer dimensions and positional tolerances to suit metric threaded fasteners with nominal diameters of 3 mm to 20 mm.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3368:2008(Main)
Aerospace series - Aerospace design standard - Holes for locating pins
SIST EN 3368:2008

This standard provides particulars of hole sizes and associated fitting conditions to suit locating pins EN 3150 and EN 3151 series.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2786:2008(Main)
Aerospace series - Electrolytic silver plating of fasteners
SIST EN 2786:2008

This standard specifies the electrolytic silver plating of fasteners used in aerospace applications.
It shall apply whenever referenced.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3782:2008(Main)
Aerospace series - Holes for 100° countersunk head screws - Design standard
EN 3782:2008

This standard specifies holes in common parts and sheet metal for 100° countersunk head screws with nominal diameters of 3 mm to 5 mm and head configuration according to EN standards for aerospace applications.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3043:2008(Main)
Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification
EN 3043:2008

This standard specifies the technical and quality assurance requirements for externally threaded fasteners in material FE-PA92HT (A286) of tensile strength class 900 MPa at room temperature, maximum test temperature of material 650 °C.
The externally threaded fasteners specified here may be manufactured by machining from bar or by forging at the manufacturer's option, if forged there is no requirement for control of grain flow.
Primarily for aerospace applications it is applicable to such externally threaded fasteners when referenced on the product standard or drawing.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3201:2008(Main)
Aerospace series - Holes for metric threaded fasteners - Design standard
EN 3201:2008

This standard provides particulars of hole sizes, chamfer dimensions and positional tolerances to suit metric threaded fasteners with nominal diameters of 3 mm to 20 mm.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2786:2008(Main)
Aerospace series - Electrolytic silver plating of fasteners
EN 2786:2008

This standard specifies the electrolytic silver plating of fasteners used in aerospace applications.
It shall apply whenever referenced.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3611:2001(Main)
Aerospace series - Spigots - Dimensions and fit selection - Design standard
EN 3611:1995

This standard specifies the dimensions and fit selection of tight fitting spigots for locating casings and other major components for aerospace applications.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3611:1995(Main)
Aerospace series - Spigots - Dimensions and fit selection - Design standard
SIST EN 3611:2001

This standard specifies the dimensions and fit selection of tight fitting spigots for locating casings and other major components for aerospace applications.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 3043(Main)
Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification
oSIST prEN 3043:2023
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 4473:2023(Main)
Aerospace series - Aluminium pigmented organic coatings for fasteners - Technical specification
prEN 4473

This document defines the performance requirements for aluminium pigmented organic coatings to be applied on titanium, titanium alloys, nickel or cobalt based alloys and corrosion resistant steels.
This specification does not cover electrical bonding and lightning strike applications of this coating. Additional qualification tests will be agreed with the OEM upon qualification.
NOTE   This coating is not recommended for use on non-corrosion resistant steel fasteners.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 3043:2023(Main)
Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification
prEN 3043
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4710-003:2015(Main)
Aerospace series - Quick release fastening systems for non-structural applications - Part 003: Spring clamp
EN 4710-03:2015

This standard specifies the dimensions, mass, tolerances and static values of catch spring for use in
fuselage interior equipment and non-structural or secondary structural area. This standard part shall be
used in conjunction with EN 4710-06 and EN 4710-07 as described in EN 4710-02.
The applicable temperature range is −55 °C to 85 °C.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4710-001:2015(Main)
Aerospace series - Quick release fastening systems for non-structural applications - Part 001: Technical specification
EN 4710-01:2015

This European Standard specifies the required characteristics, inspections, tests, quality assurance requirements, conditions for qualification acceptance and delivery of quick release fastening systems. This European Standard applies to all fastening systems for use in fuselage interior equipment and non-structural or secondary structural area.
It may be applied when referred to in the product standard or in a design specification.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 7403:1983(Main)
Fasteners for aerospace construction — Spline drive wrenching configuration — Metric series
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 4095:1978(Main)
Fasteners for aerospace construction — Bi-hexagonal wrenching configuration
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
50