iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

53.020.01 - Lifting appliances in general

ICS 53.020.01 Details

Lifting appliances in general

Hebevorrichtungen im allgemeinen

Appareils de levage en général

Dvigalne naprave na splošno

General Information

Parent
53.020 - Lifting equipment

e-Library Subscription

Create subscription and get permanent access to documents within 53.020.01 - Lifting appliances in general

Type
Monthly Subscription
for
seat
×
$ 113.59
$ 113.59

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
IEC
IEC 60204-32:2023(Main)
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines

IEC 60204-32:2023 applies to electrical, electronic, programmable electronic equipment and systems to hoisting machines and related equipment, including a group of hoisting machines working together in a co-ordinated manner. The equipment covered by this document commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) and includes systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars. This document is applicable to equipment or parts of equipment not exceeding 1 000 V AC or 1 500 V DC between lines and with nominal frequencies not exceeding 200 Hz. This document does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of hoisting machine has unique requirements to be accommodated to provide adequate safety. This document does not cover noise risks. Additional and special requirements can apply to the electrical equipment of hoisting machines including those that
– handle or transport potentially explosive material (e.g. paint or sawdust);
– are intended for use in potentially explosive and/or flammable atmospheres;
– have special risks when transporting or moving certain materials;
– are intended for use in mines.
For the purposes of this document, hoisting machines include cranes of all types, winches of all types and storage and retrieval machines. The following product groups are included:
– overhead travelling cranes;
– mobile cranes;
– tower cranes;
– slewing luffing cranes;
– gantry cranes;
– offshore cranes;
– floating cranes;
– winches of all types;
– hoists and accessories;
– loader cranes;
– cable cranes;
– load holding devices;
– storage and retrieval machines;
– monorail hoists;
– straddle carriers;
– rubber tyred gantry cranes (RTGs).
This document does not cover individual items of electrical equipment other than their selection for use and their erection.
IEC 60204-32:2023 cancels and replaces the second edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment to the IEC 60204-1 sixth edition (2016) especially for:
– requirements for earthing and bonding;
– requirements for circuit protection;
– consideration of use of Power Drive Systems;
– protective bonding requirements and terminology;
– requirements pertaining to safe torque off for PDS, emergency stop, and control circuit protection;
– symbols for actuators of control devices;
b) reference for high voltage electrical equipment;
c) cableless control system requirements;
d) EMC requirements;
e) technical documentation requirements;
f) general updating to current special national conditions, normative standards, and bibliographical references.

  • Standard
    313 pages
    English and French language
    sale 15% off
SIST
SIST EN 60204-32:2000(Main)
Safety of machinery - Electrical equipment of machines -- Part 32: Requirements for hoisting machines
EN 60204-32:1998

Applicable to equipment or parts of equipment not exceeding 1 000 V a.c. or 1 500 V d.c. between lines, and with nominal frequencies not exceeding 200 Hz. Additional and special requirements can apply to the electrical equipment of hoisting machines that are used in potentially explosive and/or flammable atmospheres. Does not cover individual items of electrical equipment other than their selection for use and their erection.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20321:2020(Main)
Petroleum, petrochemical and natural gas industries - Safety of machineries - Powered elevators (ISO 20321:2020)
EN ISO 20321:2020

This document specifies general safety requirements for the design, testing and production of powered elevators. The requirements are applicable for on- and off-shore applications of such elevators in the petroleum, petrochemical and natural gas industries.
This document does not cover any other type of elevator. It is not applicable to the following types of products: lifting nubbins, lifting plugs, lifting subs, internal gripping devices, equipment for lifting tubular from and onto a vessel. This list is not exclusive.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 7752-1:2010/Amd 1:2012(Amendment)
Cranes — Control layout and characteristics — Part 1: General principles — Amendment 1
SIST ISO 7752-1:2012/Amd 1:2013

This part of ISO 7752 establishes principles and requirements for the controls of cranes. It deals with the arrangement of those controls used in positioning loads and serves as a general basis for the elaboration of detailed standards covering the controls of particular types of cranes.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60204-32:2008(Main)
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
SIST EN 60204-32:2009

IEC 60204-32 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment. The equipment covered by this standard commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) including systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars. This standard is applicable to equipment or parts of equipment not exceeding 1 000 V a.c. or 1 500 V d.c. between lines and with nominal frequencies not exceeding 200 Hz. For the purposes of this standard, hoisting machines include cranes of all types, winches of all types, and storage and retrieval machines. It includes the following significant technical changes with respect to the previous edition: - deletion of Clause 11 of the previous edition; - modification of the structure of equipotential bonding (Clause 8); - separation of control functions (Clause 9) and devices (Clause 10); - structure of technical documentation (Clause 17); - verification of protection by automatic disconnection of supply (18.2); - Subclause 9.2.7 on cableless controls has been modified.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 7752-1:2010(Main)
Cranes — Control layout and characteristics — Part 1: General principles
SIST ISO 7752-1:2012

ISO 7752-1:2010 establishes principles and requirements for the controls of cranes. It deals with the arrangement of those controls used in positioning loads and serves as a general basis for the elaboration of detailed standards covering the controls of particular types of cranes.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    8 pages
    French language
    sale 15% off
SIST
SIST EN 60204-32:2009
Safety of machinery - Electrical equipment of machines -- Part 32: Requirements for hoisting machines
EN 60204-32:2008

This part of IEC 60204 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment. The equipment covered by this standard commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) including systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars (see Figure 3). This standard is applicable to equipment or parts of equipment not exceeding 1 000 V a.c. or 1 500 V d.c. between lines and with nominal frequencies not exceeding 200 Hz. Additional and special requirements can apply to the electrical equipment of hoisting machines including those that - are intended for use in open air (i.e., outside buildings or other protective structures); - handle or transport potentially explosive material (for example, paint or sawdust); - are intended for use in potentially explosive and/or flammable atmospheres; - are intended for use in mines. For the purposes of this standard, hoisting machines include cranes of all types, winches of all types, and storage and retrieval machines. The following product groups are included: - overhead travelling cranes; - mobile cranes; - tower cranes; - slewing luffing cranes; - gantry cranes; - offshore cranes; - floating cranes; - winches of all types; - hoists and accessories; - loader cranes; - cable cranes; - load holding devices; - storage and retrieval machines; - monorail hoists; - straddle carriers; - rubber tyred gantry cranes (RTGs). This standard does not cover individual items of electrical equipment other than their selection for use and their erection.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 60204-32:2008(Main)
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines

IEC 60204-32 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment. The equipment covered by this standard commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) including systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars. This standard is applicable to equipment or parts of equipment not exceeding 1 000 V a.c. or 1 500 V d.c. between lines and with nominal frequencies not exceeding 200 Hz. For the purposes of this standard, hoisting machines include cranes of all types, winches of all types, and storage and retrieval machines. It includes the following significant technical changes with respect to the previous edition:
- deletion of Clause 11 of the previous edition;
- modification of the structure of equipotential bonding (Clause 8);
- separation of control functions (Clause 9) and devices (Clause 10);
- structure of technical documentation (Clause 17);
- verification of protection by automatic disconnection of supply (18.2);
- Subclause 9.2.7 on cableless controls has been modified.

  • Standard
    262 pages
    English and French language
    sale 15% off
SIST
SIST ISO 7363:1997(Main)
Cranes and lifting appliances -- Technical characteristics and acceptance documents
ISO 7363:1986

Establishes the form of presentation and content of the documents which a manufacturer should provide with the equipment. Documents give technical information and include acceptance documents for the equipment to facilitate its installation, testing and use. Specimen acceptance documents are given in the annex. Applies to all types defined in ISO 4306-1.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
ISO
ISO 4301-1:1986(Main)
Cranes and lifting appliances — Classification — Part 1: General

Establishes a general classification of cranes based on the number of operating cycles to be carried out during the expected life of the crane and a load spectrum factor which represents a nominal state of loading. Classification considers only the operating conditions which are independent of the type of crane and the way it is driven. Additional information for the user: This version uses the time - based classification method. If you need to use the cycle - based classification method please use the 2016 version.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 7363:1986(Main)
Cranes and lifting appliances — Technical characteristics and acceptance documents
SIST ISO 7363:1997

Establishes the form of presentation and content of the documents which a manufacturer should provide with the equipment. Documents give technical information and include acceptance documents for the equipment to facilitate its installation, testing and use. Specimen acceptance documents are given in the annex. Applies to all types defined in ISO 4306-1.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
ISO
ISO 2374:1983(Main)
Lifting appliances — Range of maximum capacities for basic models

Sets forth the recommended range of maximum capacities of cranes from 0,1 to 1000 t. Applies to all types of cranes.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
CLC
FprEN IEC 60204-32:2023(Main)
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
kSIST FprEN IEC 60204-32:2023

This part of IEC 60204 applies to electrical, electronic, programmable electronic equipment and systems to hoisting machines and related equipment, including a group of hoisting machines working together in a co-ordinated manner NOTE 1 In this part of IEC 60204, the term "electrical" includes both electrical and electronic matters (i.e. "electrical equipment" means both the electrical, electronic and programmable electronic equipment). NOTE 2 In the context of this part of IEC 60204, the term “person” refers to any individual and includes those persons who are assigned and instructed by the user or user’s agent(s) in the use and care of the hoisting machine in question. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) and includes systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars (see Figure 3). NOTE 3 The requirements for the electrical supply installation of electrical equipment of a hoisting machine are given in IEC 60364. This standard is applicable to equipment or parts of equipment not exceeding 1 000 V AC or 1 500 V DC between lines and with nominal frequencies not exceeding 200 Hz. NOTE 4 Special requirements for electrical equipment of hoisting machines intended to be operated at higher voltages, see IEC 60204-11 (Annex D) This part of IEC60204 does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of hoisting machine has unique requirements to be accommodated to provide adequate safety. This part of 60204 doesn´t cover noise risks and vibration risks. Additional and special requirements can apply to the electrical equipment of hoisting machines including those that - handle or transport potentially explosive material (e.g. paint or sawdust); - are intended for use in potentially explosive and/or flammable atmospheres; - have special risks when transporting or moving certain materials - are intended for use in mines. For the purposes of this standard, hoisting machines include cranes of all types, winches of all types and storage and retrieval machines. The following product groups are included: - overhead travelling cranes; - mobile cranes; - tower cranes; - slewing luffing cranes; - gantry cranes; - offshore cranes; - floating cranes; - winches of all types; - hoists and accessories; - loader cranes; - cable cranes; - load holding devices; - storage and retrieval machines; - monorail hoists; - straddle carriers; - rubber tyred gantry cranes (RTGs). NOTE 5 Definition of the different crane types see ISO 4306-1 This standard does not cover individual items of electrical equipment other than their selection for use and their erection.

  • Draft
    141 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 60204-32:2023(Main)
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
FprEN IEC 60204-32:2023

This part of IEC 60204 applies to electrical, electronic, programmable electronic equipment and systems to hoisting machines and related equipment, including a group of hoisting machines working together in a co-ordinated manner
NOTE 1 In this part of IEC 60204, the term "electrical" includes both electrical and electronic matters (i.e. "electrical equipment" means both the electrical, electronic and programmable electronic equipment).
NOTE 2 In the context of this part of IEC 60204, the term “person” refers to any individual and includes those persons who are assigned and instructed by the user or user’s agent(s) in the use and care of the hoisting machine in question.
The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) and includes systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars (see Figure 3).
NOTE 3 The requirements for the electrical supply installation of electrical equipment of a hoisting machine are given in IEC 60364.
This standard is applicable to equipment or parts of equipment not exceeding 1 000 V AC or 1 500 V DC between lines and with nominal frequencies not exceeding 200 Hz.
NOTE 4 Special requirements for electrical equipment of hoisting machines intended to be operated at higher voltages, see IEC 60204-11 (Annex D)
This part of IEC60204 does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of hoisting machine has unique requirements to be accommodated to provide adequate safety. This part of 60204 doesn´t cover noise risks and vibration risks.
Additional and special requirements can apply to the electrical equipment of hoisting machines including those that
- handle or transport potentially explosive material (e.g. paint or sawdust);
- are intended for use in potentially explosive and/or flammable atmospheres;
- have special risks when transporting or moving certain materials
- are intended for use in mines.
For the purposes of this standard, hoisting machines include cranes of all types, winches of all types and storage and retrieval machines. The following product groups are included:
- overhead travelling cranes;
- mobile cranes;
- tower cranes;
- slewing luffing cranes;
- gantry cranes;
- offshore cranes;
- floating cranes;
- winches of all types;
- hoists and accessories;
- loader cranes;
- cable cranes;
- load holding devices;
- storage and retrieval machines;
- monorail hoists;
- straddle carriers;
- rubber tyred gantry cranes (RTGs).
NOTE 5 Definition of the different crane types see ISO 4306-1
This standard does not cover individual items of electrical equipment other than their selection for use and their erection.

  • Draft
    141 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 7752-1:1997(Main)
Lifting appliances -- Controls -- Layout and characteristics -- Part 1: General principles
ISO 7752-1:1983

Deals with the arrangement of those controls which are used in positioning loads and serves as general basis for the elaboration of detailed standards for particular types. Defines basic requirements of these controls, safe operation conditions and criteria for the layout of control levers and pedals.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
CLC
EN 60204-32:1998(Main)
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
SIST EN 60204-32:2000

Applicable to equipment or parts of equipment not exceeding 1 000 V a.c. or 1 500 V d.c. between lines, and with nominal frequencies not exceeding 200 Hz. Additional and special requirements can apply to the electrical equipment of hoisting machines that are used in potentially explosive and/or flammable atmospheres. Does not cover individual items of electrical equipment other than their selection for use and their erection.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 7752-1:1983(Main)
Lifting appliances — Controls — Layout and characteristics — Part 1: General principles
SIST ISO 7752-1:1997

Deals with the arrangement of those controls which are used in positioning loads and serves as general basis for the elaboration of detailed standards for particular types. Defines basic requirements of these controls, safe operation conditions and criteria for the layout of control levers and pedals.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
50