This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s). This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the operation and the maintenance of the pneumatic conveying system. when carried out in accordance with the specifications given by the manufacturer or his authorised representative. Annex A gives a list of hazards according to EN ISO 12100-1. and the safety requirements and/or measures are specified in the same order as they are given in Annex A. This standard applies to design, on site assembly, and commissioning stages. This standard applies also to the built-in actuators and parts of the systems, which control the components. The safety requirements for the transportation including loading and unloading of the components are not covered by this standard.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s).
1.2   This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the operation and the maintenance of the pneumatic conveying system. when carried out in accordance with the specifications given by the manufacturer or his authorised representative.
Annex A gives a list of hazards according to EN ISO 12100-1 and the safety requirements and/or measures are specified in the same order as they are given in Annex A.
1.3   This standard applies to design, on site assembly, and commissioning stages.
1.4   This standard applies also to the built-in actuators and parts of the systems, which control the components.
1.5   Exclusions
This standard does not specify the requirements for any elements used as a link between a fixed part(s) of the system and any other part mounted on mobile/movable supports (e.g.: ship, unloaders, ...).
This standard does not take into account the risks of burns and scalds by the radiation of heat sources or by contact with hot gases.
This standard does not take into account the risk generated by ionising materials used in measuring equipment (e.g. level indicators).
This standard does not specify the requirements for handling specific hazardous materials, such as radiating material, explosives, explosive gases, ...
This standard does not specify the requirements for hazards due to electrostatic charges of pipes and equipment made of non-metallic materials.
The safety requirements for the transportation including loading and unloading of the components are not covered by this standard.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the dimensions of piping in the pneumatic handling of loose bulk materials in three series, light, medium and strong.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

Specifies, in addition to the general safety rules set out in ISO/T 1819, the special safety rules for couplings and hose components used in the pneumatic handling of loose bulk materials. These safety rules apply regardless of the use for which the equipment is intended.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Specifies the dimensions of bends for use in pneumatic handling for loose bulk materials for the three series: light, moderate and heavy duty service.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Specifies the dimensions of piping in the pneumatic handling of loose bulk materials in three series, light, medium and strong.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

1.1 This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s).

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1 This standard specifies the special safety requirements for those types of fixed pneumatic handling systems and components as defined in clause 3, which are designed for conveying bulk materials on a continuous or an intermittent basis (batch conveying system) from the loading point(s) to the unloading point(s).

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off