59.060.01 - Textile fibres in general
ICS 59.060.01 Details
Textile fibres in general
Textilfasern im allgemeinen
Fibres textiles en général
Tekstilna vlakna na splošno
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 59.060.01 - Textile fibres in general
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
- 1 (current)
- 2
- 3
- 4
- 5
This document describes the measurement for the determination of the sheet resistance of conductive textile structures or conductive structures by using eddy current technology in reflection mode setup/ arrangement.
It is applicable to conductive textile structures or conductive structures intended for application in/to textiles in the form of sheets (woven fabric, knitted fabric, nonwoven, coated fabric) where the area is formed by intersecting surfaces having conductive textile material.
It is also applicable to multilayer structures containing both insulating and conductive layers.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesGerman languagesale 10% offe-Library read for1 day
- Draft15 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method of determining phthalates in textiles with gas chromatography–
mass spectrometry (GC-MS).
This document is applicable to textile products where there is a risk of the presence of some phthalates.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft28 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method of determining phthalates in textiles with gas chromatography–mass spectrometry (GC-MS).
This document is applicable to textile products where there is a risk of the presence of some phthalates.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft28 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method of determining phthalates in textiles with gas chromatography–mass spectrometry (GC-MS). This document is applicable to textile products where there is a risk of the presence of some phthalates.
- Standard21 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off
This document describes the measurement for the determination of the sheet resistance of conductive textile structures or conductive structures by using eddy current technology in reflection mode setup/ arrangement. It is applicable to conductive textile structures or conductive structures intended for application in/to textiles in the form of sheets (woven fabric, knitted fabric, nonwoven, coated fabric) where the area is formed by intersecting surfaces having conductive textile material. It is also applicable to multilayer structures containing both insulating and conductive layers.
- Standard12 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document specifies a gravimetric method and a vibroscope method for the determination of the linear density of textile fibres applicable respectively to:
a) bundles of fibres;
b) individual fibres.
Useful data can be obtained on man-made fibres and, with less precision, on natural fibres.
This document only applies to fibres which can be kept straight and, in the case of bundles, parallel, during test preparation. It is properly applicable when the fibres are readily freed of crimp. The methods in this document are not applicable to tapered fibres.
The vibroscope method is not always applicable to hollow and flat (ribbon-like) fibres.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method for determining the amount of certain benzotriazole compounds (UV-320, UV-327, UV-328, UV-350) in textiles by using liquid chromatography-tandem mass spectrometry (LC-MS/MS) or liquid chromatography-diode array detector (LC-DAD) or gas chromatography with mass spectrometry (GC-MS). The method is applicable to all kinds of textile materials (fibres and fabrics).
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies a method, using formic acid and zinc chloride, to determine the mass percentage of viscose or certain types of cupro or modal or lyocell, after removal of non-fibrous matter, in textiles made of mixtures of
— viscose or certain types of the cupro or modal or lyocell fibres
with
— flax fibres.
This document is not applicable to mixtures in which the flax fibre has suffered extensive chemical degradation, nor when the viscose, cupro, modal or lyocell fibre is rendered incompletely soluble by the presence of certain permanent finishes or reactive dyes that cannot be removed completely.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft9 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a gravimetric method and a vibroscope method for the determination of the
linear density of textile fibres applicable respectively to:
a) bundles of fibres;
b) individual fibres.
Useful data can be obtained on man-made fibres and, with less precision, on natural fibres.
This document only applies to fibres which can be kept straight and, in the case of bundles, parallel,
during test preparation. It is properly applicable when the fibres are readily freed of crimp. The methods
in this document are not applicable to tapered fibres.
The vibroscope method is not always applicable to hollow and flat (ribbon-like) fibres.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a chromatographic method to determine the amount of short-chain chlorinated paraffins (SCCPs: C10-C13) and middle-chain chlorinated paraffins (MCCPs: C14-C17) in textile articles, especially in polymer of the coated fabrics, prints made of polymer and buttons made of polymer (e.g. polyvinylchloride) by means of solvent extraction and gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS).
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft24 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method, using formic acid and zinc chloride, to determine the mass
percentage of viscose or certain types of cupro or modal or lyocell, after removal of non-fibrous matter,
in textiles made of mixtures of
— viscose or certain types of the cupro or modal or lyocell fibres
with
— flax fibres.
This document is not applicable to mixtures in which the flax fibre has suffered extensive chemical
degradation, nor when the viscose, cupro, modal or lyocell fibre is rendered incompletely soluble by the
presence of certain permanent finishes or reactive dyes that cannot be removed completely.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft9 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method, using acetone, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of
— acetate
with
— wool, animal hair, silk, protein, cotton (scoured, kiered, or bleached), flax (or linen), hemp, jute, abaca, alfa, coir, broom, ramie, sisal, cupro, viscose, modal, polyamide, polyester, polypropylene, acrylic, elastolefin, elastomultiester, melamine, polypropylene/polyamide bicomponent, polyacrylate and glass fibres.
It is not applicable to mixtures containing modacrylic fibres, certain chlorofibres, nor to mixtures containing acetate fibres that have been deacetylated on the surface.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft6 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies the method and conditions of test for the determination of the breaking force and elongation at break of individual fibres in the conditioned or wet state.
The determination of these fibre properties, when carried out on different kinds of testing equipment, will not generally give identical results. To avoid such differences, this document is restricted to the use of constant-rate-of-extension testing machine.
It is applicable to all fibres, including crimped fibres, provided that the length of fibre available enables the gauge length specified in this document.
NOTE For natural fibres (especially wool and cotton), the breaking test most commonly performed is that of bundles of fibres (see ISO 3060 and IWTO 32‑82).
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method, using sulfuric acid, to determine the mass percentage of silk, after removal of non-fibrous matter, in textiles made of mixtures of
— silk
with
— wool or other animal hair.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method using hot formic acid to determine the mass percentage of melamine fibres after removal of non-fibrous matter, in textiles made of mixtures of:
— melamine fibres
with
— cotton, polypropylene or aramid fibres.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method, using dimethylformamide, to determine the mass percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of mixtures of
— acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres
with
— wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, polypropylene, elastomultiester, elastolefin, melamine, polypropylene/polyamide bicomponent, polyacrylate or glass fibres.
It is not applicable to animal hair, wool and silk dyed with chromium based mordant dyes.
NOTE Dyestuff identification is described in ISO 16373-1.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a chromatographic method to determine the amount of short-chain chlorinated paraffins (SCCPs: C10-C13) and middle-chain chlorinated paraffins (MCCPs: C14-C17) in textile articles, especially in polymer of the coated fabrics, prints made of polymer and buttons made of polymer (e.g. polyvinylchloride) by means of solvent extraction and gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS).
- Standard15 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
- Draft15 pagesEnglish languagesale 15% off
- Draft15 pagesFrench languagesale 15% off
This document specifies a method for the automatic determination of the deformability of textile fabrics,
including continuous-fibre reinforcement textiles. This method is not applicable to resin impregnated
fabrics.
The method is suitable for use with fabrics such as woven or knitted fabrics, nonwovens, non-crimp
fabrics, fabrics made of glass rovings or untwisted carbon filament yarns intended for reinforced
composite materials. When applying the method to multi-axial non-crimp fabrics, the evaluation of the
fibre orientation and gaps only incorporates the uppermost layer.
The method can be used for fabrics treated with powder binder.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft25 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method using trichloroacetic acid and chloroform to determine the mass percentage of polyester fibres after removal of non-fibrous matter, in textiles made of mixtures of
— polyester fibres
with
— aramid fibres (except polyamide imide), flame retardant (FR) viscose and polyacrylate.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a qualitative and quantitative procedure to determine the composition of animal hair fibre blends (made of wool, cashmere, yak, alpaca, camel or angora) by LC-MS without protein reduction.
NOTE 1 The composition of non-animal hair fibres can be measured by ISO 1833 (all parts). Both results are combined to determine the total fibre composition.
The method is based on a preliminary identification, by light microscopy, of all fibres in the blend on the basis of their morphology, according to ISO/TR 11827[4]. It is not applicable if fibres of the same animal species (such as blends of cashmere and mohair) are present.
NOTE 2 In this case, the quantitative analysis is performed using microscopical analysis [for example, ISO 17751 (all parts)].
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a common method for the quantitative chemical analysis of various mixtures of fibres. This method and the methods described in the other parts of ISO 1833 are applicable, in general, to fibres in any textile form. Where certain textile forms are excepted, these are listed in the scope of the appropriate part.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft25 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies methods of quantitative analysis of various ternary mixtures of fibres.
The field of application of each method for analysing mixtures, specified in the parts of ISO 1833, indicates the fibres to which the method is applicable.
This document is applicable to mixtures of fibres with more than three components provided that the combination of test methods leads back to simple cases of fibre mixtures. Table B.1 illustrates the typical ternary mixtures and their applied corresponding parts of the ISO 1833 series.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft20 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes a method, using capacitance measuring equipment, for determining the unevenness of linear density along the length of textile strands. The method is applicable to tops, slivers, rovings, spun yarns and continuous filament yarns, made from either natural or man-made fibres, in the range of 4 tex (g/km) to 80 ktex (kg/km) for staple-fibre strands and 1 tex(g/km) to 600 tex (g/km) for continuous-filament yarns. It is not applicable to fancy yarns or to strands composed fully or partly of conductive materials such as metals; the latter requires an optical sensor (see A.4), and to raw silk filaments which are tested according to a specific standard. The method describes the preparation of a variance-length curve, as well as the determination of periodicities of linear density. It also covers the counting of imperfections in the yarn, namely of neps and of thick and thin places.
- Standard10 pagesEnglish languagesale 15% off
- Draft10 pagesEnglish languagesale 15% off
This document specifies a gravimetric method and a vibroscope method for the determination of the linear density of textile fibres applicable respectively to: a) bundles of fibres; b) individual fibres. Useful data can be obtained on man-made fibres and, with less precision, on natural fibres. This document only applies to fibres which can be kept straight and, in the case of bundles, parallel, during test preparation. It is properly applicable when the fibres are readily freed of crimp. The methods in this document are not applicable to tapered fibres. The vibroscope method is not always applicable to hollow and flat (ribbon-like) fibres.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Draft10 pagesEnglish languagesale 15% off
This document specifies a method, using sulfuric acid, to determine the mass percentage of polyamide, after removal of non-fibrous matter, in textiles made of binary mixtures of
— polyamide
with
—polypropylene/polyamide bicomponent.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method, using formic acid and zinc chloride, to determine the mass percentage of viscose or certain types of cupro or modal or lyocell, after removal of non-fibrous matter, in textiles made of mixtures of — viscose or certain types of the cupro or modal or lyocell fibres with — flax fibres. This document is not applicable to mixtures in which the flax fibre has suffered extensive chemical degradation, nor when the viscose, cupro, modal or lyocell fibre is rendered incompletely soluble by the presence of certain permanent finishes or reactive dyes that cannot be removed completely.
- Standard4 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Draft4 pagesEnglish languagesale 15% off
This document provides definitions in the field of "smart" textiles and textile products as well as a categorization of different types of smart textiles. It describes briefly the current stage of development of these products and their application potential and gives indications on preferential standardization needs.
- Technical report32 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft29 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method, using acetone, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of — acetate with — wool, animal hair, silk, protein, cotton (scoured, kiered, or bleached), flax (or linen), hemp, jute, abaca, alfa, coir, broom, ramie, sisal, cupro, viscose, modal, polyamide, polyester, polypropylene, acrylic, elastolefin, elastomultiester, melamine, polypropylene/polyamide bicomponent, polyacrylate and glass fibres. It is not applicable to mixtures containing modacrylic fibres, certain chlorofibres, nor to mixtures containing acetate fibres that have been deacetylated on the surface.
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Draft2 pagesEnglish languagesale 15% off
- Draft2 pagesFrench languagesale 15% off
This document provides definitions in the field of "smart" textiles and textile products as well as a categorization of different types of smart textiles. It describes briefly the current stage of development of these products and their application potential and gives indications on preferential standardization needs.
- Technical report22 pagesEnglish languagesale 15% off
- Technical report23 pagesFrench languagesale 15% off
- Draft22 pagesEnglish languagesale 15% off
This document specifies the method and conditions of test for the determination of the breaking force
and elongation at break of individual fibres in the conditioned or wet state.
The determination of these fibre properties, when carried out on different kinds of testing equipment,
will not generally give identical results. To avoid such differences, this document is restricted to the use
of constant-rate-of-extension testing machine.
It is applicable to all fibres, including crimped fibres, provided that the length of fibre available enables
the gauge length specified in this document.
NOTE For natural fibres (especially wool and cotton), the breaking test most commonly performed is that of
bundles of fibres (see ISO 3060 and IWTO 32‑82).
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method using hot formic acid to determine the mass percentage of melamine
fibres after removal of non-fibrous matter, in textiles made of mixtures of:
— melamine fibres
with
— cotton, polypropylene or aramid fibres.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method, using diluted acetic acid, to determine the mass percentage of chitosan fibres, after elimination of non-fibrous matter, in textiles made of mixtures of:
— chitosan fibre
with
— certain other fibres.
This method is applicable to fibre mixtures of chitosan fibre with cellulose fibres (cotton, linen, ramie, viscose, modal, lyocell), protein fibres (wool, cashmere, silk), or synthetic fibres (polyester, polyamide, acrylic).
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for determination of triclosan residues in textiles by high performance liquid chromatography — tandem mass spectrometry (HPLC-MS/MS). This method is applicable to all kinds of textile products.
- Standard6 pagesEnglish languagesale 15% off
- Draft6 pagesEnglish languagesale 15% off
This document specifies the method and conditions of test for the determination of the breaking force and elongation at break of individual fibres in the conditioned or wet state. The determination of these fibre properties, when carried out on different kinds of testing equipment, will not generally give identical results. To avoid such differences, this document is restricted to the use of constant-rate-of-extension testing machine. It is applicable to all fibres, including crimped fibres, provided that the length of fibre available enables the gauge length specified in this document. NOTE For natural fibres (especially wool and cotton), the breaking test most commonly performed is that of bundles of fibres (see ISO 3060 and IWTO 32‑82).
- Standard12 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
- Draft12 pagesEnglish languagesale 15% off
- Draft13 pagesFrench languagesale 15% off
This International standard specifies a method for quantitative and qualitative analysis of extractable organotin compounds without derivatization in textile and textile‐related products.
This International Standard provides a method that uses Liquid Chromatograph with Tandem Mass Spectrometer (LC/MS/MS).
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method, using sulfuric acid, to determine the mass percentage of silk, after removal of non-fibrous matter, in textiles made of mixtures of — silk with — wool or other animal hair.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies a method using hot formic acid to determine the mass percentage of melamine fibres after removal of non-fibrous matter, in textiles made of mixtures of: — melamine fibres with — cotton, polypropylene or aramid fibres.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies a method, using dimethylformamide, to determine the mass percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of mixtures of — acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with — wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, polypropylene, elastomultiester, elastolefin, melamine, polypropylene/polyamide bicomponent, polyacrylate or glass fibres. It is not applicable to animal hair, wool and silk dyed with chromium based mordant dyes. NOTE Dyestuff identification is described in ISO 16373-1.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
This document specifies a method, using concentrated sulfuric acid, to determine the mass percentage of chlorofibres and certain other fibres, after removal of non-fibrous material, in textiles made of mixtures of
— cotton, viscose, cupro, modal, lyocell, acetate, triacetate, polyamide, polyester, elastomultiester, certain acrylic and certain modacrylic fibres
with
— chlorofibres (based on homopolymers of vinyl chloride), polypropylene, elastolefin, melamine and polypropylene/polyamide bicomponent.
The modacrylics concerned are those which give a clear solution when immersed in concentrated sulfuric acid.
This method can be used, particularly in place of the methods described in ISO 1833-12 and ISO 1833-13, in all cases where a preliminary test shows that the chlorofibres do not dissolve completely either in dimethylformamide or in the azeotropic mixture of carbon disulfide and acetone.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies methods of quantitative analysis of various ternary mixtures of fibres.
The field of application of each method for analysing mixtures, specified in the parts of ISO 1833,
indicates the fibres to which the method is applicable.
This document is applicable to mixtures of fibres with more than three components provided that
the combination of test methods leads back to simple cases of fibre mixtures. Table B.1 illustrates the
typical ternary mixtures and their applied corresponding parts of the ISO 1833 series.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a qualitative and quantitative procedure to determine the composition of
animal hair fibre blends (made of wool, cashmere, yak, alpaca, camel or angora) by LC-MS without
protein reduction.
NOTE 1 The composition of non-animal hair fibres can be measured by ISO 1833 (all parts). Both results are
combined to determine the total fibre composition.
The method is based on a preliminary identification, by light microscopy, of all fibres in the blend on the
basis of their morphology, according to ISO/TR 11827[4]. It is not applicable if fibres of the same animal
species (such as blends of cashmere and mohair) are present.
NOTE 2 In this case, the quantitative analysis is performed using microscopical analysis [for example,
ISO 17751 (all parts)].
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a common method for the quantitative chemical analysis of various mixtures
of fibres. This method and the methods described in the other parts of ISO 1833 are applicable, in
general, to fibres in any textile form. Where certain textile forms are excepted, these are listed in the
scope of the appropriate part.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft25 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies common methods for the quantitative microscopical analysis of various mixtures of fibres. The methods described are based on the use of a light microscope (LM) or a scanning electronic microscope (SEM), on the measurements of the fibre apparent diameter (preparation of longitudinal views) or on the measurements of fibre section area (preparation of cross views), depending on the section shape of the fibres.
NOTE 1 When the section shape is circular or almost circular, the longitudinal views are appropriate. For the other section shapes, the cross views are adequate and Annex A lists conventional density of fibres to be used for the calculation of the mass percentage of the components. Pictures of section shapes of fibres can be found in ISO/TR 11827.
NOTE 2 Annex B presents statistical data on fibre diameter measurements (longitudinal view) and on fibre area measurements (cross view).
The given procedures apply to fibres in any textile form when mixtures of fibres cannot be separated by manual methods or by chemical methods.
Examples of mixtures of fibres are cashmere and wool, cotton and flax, flax and hemp.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a test method for determining the presence of organotin compounds. This test
method is applicable to all types of materials of textile products.
NOTE CEN/TR 16741 defines which materials are concerned by this determination.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies a method, using sulfuric acid, to determine the mass percentage of polyamide,
after removal of non-fibrous matter, in textiles made of binary mixtures of
— polyamide
with
— polypropylene/polyamide bicomponent.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method using trichloroacetic acid and chloroform to determine the mass percentage of polyester fibres after removal of non-fibrous matter, in textiles made of mixtures of — polyester fibres with — aramid fibres (except polyamide imide), flame retardant (FR) viscose and polyacrylate.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Draft3 pagesEnglish languagesale 15% off
This document specifies methods for the identification of some bast fibres (flax, hemp, ramie) using both light microscopy (LM) and scanning electron microscopy (SEM). This document is also applicable to blends of these bast fibres and products made from them.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft34 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies methods of quantitative analysis of various ternary mixtures of fibres. The field of application of each method for analysing mixtures, specified in the parts of ISO 1833, indicates the fibres to which the method is applicable. This document is applicable to mixtures of fibres with more than three components provided that the combination of test methods leads back to simple cases of fibre mixtures. Table B.1 illustrates the typical ternary mixtures and their applied corresponding parts of the ISO 1833 series.
- Standard17 pagesEnglish languagesale 15% off
- Standard19 pagesFrench languagesale 15% off
- Draft17 pagesEnglish languagesale 15% off
This document specifies a qualitative and quantitative procedure to determine the composition of animal hair fibre blends (made of wool, cashmere, yak, alpaca, camel or angora) by LC-MS without protein reduction. NOTE 1 The composition of non-animal hair fibres can be measured by ISO 1833 (all parts). Both results are combined to determine the total fibre composition. The method is based on a preliminary identification, by light microscopy, of all fibres in the blend on the basis of their morphology, according to ISO/TR 11827[4]. It is not applicable if fibres of the same animal species (such as blends of cashmere and mohair) are present. NOTE 2 In this case, the quantitative analysis is performed using microscopical analysis [for example, ISO 17751 (all parts)].
- Standard24 pagesEnglish languagesale 15% off
- Standard24 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
This document specifies a common method for the quantitative chemical analysis of various mixtures of fibres. This method and the methods described in the other parts of ISO 1833 are applicable, in general, to fibres in any textile form. Where certain textile forms are excepted, these are listed in the scope of the appropriate part.
- Standard18 pagesEnglish languagesale 15% off
- Standard19 pagesFrench languagesale 15% off
- Draft18 pagesEnglish languagesale 15% off
- 1 (current)
- 2
- 3
- 4
- 5