65.060.80 - Forestry equipment
ICS 65.060.80 Details
Forestry equipment
Forstwirtschaftliche Gerate
Matériel forestier
Gozdarska oprema
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 65.060.80 - Forestry equipment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document establishes requirements and test procedures for determining the performance of spark arrestor exhaust systems of multi position small engines used in portable applications, such as chain-saws, brush-cutters, grass-trimmers, pole-mounted pruners, edgers and similar shaft-drive machines, hedge trimmers and hand-held and back-pack blowers. It is not applicable to spark arrestors used in vehicles or stationary equipment.
- Standard12 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
- Draft12 pagesEnglish languagesale 15% off
- Draft13 pagesFrench languagesale 15% off
This document specifies the mechanical strength requirements relating to the front and rear hand-guards of portable hand-held chain-saws for use primarily in forestry and for tree service. It also gives the corresponding test methods.
- Standard4 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Draft4 pagesEnglish languagesale 15% off
- Draft4 pagesEnglish languagesale 15% off
This document specifies the minimum clearances and related dimensions for the front and rear handles of portable, hand-held chain-saws.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
This document specifies basic test and condition requirements for deflection pulleys and sling gear which are attached to ropes and rope end connectors in forestal applications.
It is applicable to forestal hauling operations including rope-assisted felling.
This document is applicable to the following elements, sling gear and fastening elements:
- deflection pulleys used in forestal hauling operation (see 3.22);
- choker ropes;
- choker chains;
- radio controlled chokers;
- shackles;
- round slings/tree protectors;
- tree towing ropes;
- rope slide hooks/rope sliders/choker hooks.
It is not applicable to the following sling gear:
- the functional safety of radio controlled chokers;
- non-sheathed tree towing ropes made of synthetic fibres;
- slings and deflection pulleys for the function and structure of mobile yarders as defined in EN 16517 (e.g. for the installation of the haul-back line).
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies basic test and condition requirements for deflection pulleys and sling gear which are attached to ropes and rope end connectors in forestal applications.
It is applicable to forestal hauling operations including rope-assisted felling.
This document is applicable to the following elements, sling gear and fastening elements:
- deflection pulleys used in forestal hauling operation (see 3.22);
- choker ropes;
- choker chains;
- radio-controlled chokers;
- shackles;
- round slings/tree protectors;
- tree towing ropes;
- rope slide hooks/rope sliders/choker hooks.
It is not applicable to the following sling gear:
- the functional safety of radio-controlled chokers;
- non-sheathed tree towing ropes made of synthetic fibres;
- slings and deflection pulleys for the function and structure of mobile yarders as defined in EN 16517:2021 (e.g. for the installation of the haul-back line).
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chain-saws are intended to be used for forest work by only one operator, with the right hand on the rear handle and left hand on the front handle.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events, with the exception of kickback and balance for machines with an engine displacement of more than 80 cm3, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document is applicable to chain-saws manufactured after its date of publication.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment24 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft5 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass of 4,3 kg (without the guide bar and saw-chain and with tanks empty).
The chain-saws are intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B).
This document is applicable to chain-saws manufactured after its date of publication.
NOTE Figure 1 shows an example of a chain-saw within the scope of this document.
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft38 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives safety requirements and measures for their verification for the design and construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called machines) having an integral combustion engine as their power unit and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines, as well as when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.
NOTE See Annex C for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.
- Standard46 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft48 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements, and measures for their verification, for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpack-mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document, taken together with the relevant clauses of ISO 11806-1:2021 (see 4.1), deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the time of publication.
NOTE 2 See Annex A, together with ISO 11806-1:2021, Annex A, for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.
This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking).
This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine. In addition, this document defines requirements for the assembly of supported machine and traction aid winch. It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E).
Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements for the safety of many types of supported machines are within the scope of ISO 11850:2011.
This document is not applicable to traction aid winches manufactured before the date of its publication.
- Standard53 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-engine-powered forest and garden machinery, including chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers.
Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an indication of the values to be found in a real work situation.
Vibration test codes, as described in this document, enable the manufacturer to verify the effort regarding low vibration design.
- Standard39 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and measures for verification for the design, construction,
transporting and commissioning for tree service of portable, combustion-engine, hand-held chain-saws
having a maximum mass of 4,3 kg (without the guide bar and saw-chain and with tanks empty).
The chain-saws are intended to be used, with the right hand on the rear handle and left hand on the
front handle, by a trained operator.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination
or reduction of hazards arising from the use of these machines and the type of information on safe
working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant
to these machines when they are used as intended and under conditions of misuse which are reasonably
foreseeable by the manufacturer (see Annex B).
This document is applicable to chain-saws manufactured after its date of publication.
NOTE Figure 1 shows an example of a chain-saw within the scope of this document.
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft38 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and measures for verification for the design, construction,
transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chainsaws are intended to be used for forest work by only one operator, with the right hand on the rear
handle and left hand on the front handle.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination
or reduction of hazards arising from the use of these machines and the type of information on safe
working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events, with
the exception of kickback and balance for machines with an engine displacement of more than 80 cm3,
relevant to these machines when they are used as intended and under conditions of misuse which are
reasonably foreseeable by the manufacturer (see Annex A).
This document is applicable to chain-saws manufactured after its date of publication
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment24 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft5 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit (hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document, together with the relevant sections of ISO 11680-1:2021, deals with all significant hazards, hazardous situations or hazardous events, with the exception of electric shock from contact with overhead electric lines (apart from warnings and advices for inclusion in the instructions) and whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the date of publication.
NOTE 2 See Annex A for a list of significant hazards.
This document is applicable to portable, hand-held, pole-mounted powered pruners with backpack power unit manufactured after its date of publication.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners (hereafter named “machine”), including extendable and telescopic machines, having an integral combustion engine as their power source. These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instructions), relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document is applicable to portable, hand-held, pole-mounted powered pruners manufactured after its date of publication.
Brush cutters with a circular saw blade are not included in the scope of this document.
NOTE Brush cutter requirements are outlined in ISO 11806-1:2021.
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft34 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives safety requirements and measures for their verification for the design and
construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called
machines) having an integral combustion engine as their power unit and mechanical power transmission
between the power source and the cutting attachment. Methods for the elimination or reduction of
hazards arising from the use of these machines and the type of information on safe working practices
to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant
to these machines, as well as when they are used as intended and under conditions of misuse which are
reasonably foreseeable by the manufacturer.
This document is not applicable to machines equipped with metallic cutting attachments consisting of
more than one piece, such as pivoting chains or flail blades.
NOTE See Annex C for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers
manufactured after its date of publication.
- Standard46 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft48 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard defines dimensions and specifies performance and safety requirements for traction assistance/tethering winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking). It is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814 such as harvesters, forwarders, skidders, planting machines, machines for forest ground preparation and machines for extracting residual waste. These machines can be equipped with wheels and/or tracks. It is applicable to autonomous traction assistance winch systems which are installed on a position away from the supported machine too. It is not applicable to traction assistance winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope, logging systems or yarding. The safe use of traction assistance systems covered by this standard requires the supported machines to be able to remain at least stationary on any position of the slope they are driving on without using rope support.
- Standard53 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements, and measures for their verification, for the design and
construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpackmounted combustion engine power source and mechanical power transmission between the power
source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination
or reduction of hazards arising from the use of these machines and the type of information on safe
working practices to be provided by the manufacturer are specified.
This document, taken together with the relevant clauses of ISO 11806-1:2021 (see 4.1), deals with all
significant hazards, hazardous situations and hazardous events, with the exception of whole-body
vibration from the backpack power unit, relevant to these machines when they are used as intended
and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is
not available at the time of publication.
NOTE 2 See Annex A, together with ISO 11806-1:2021, Annex A, for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers
manufactured after its date of publication.
This document is not applicable to machines equipped with metallic cutting attachments consisting of
more than one piece, such as pivoting chains or flail blades
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass of 4,3 kg (without the guide bar and saw-chain and with tanks empty). The chain-saws are intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator. Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B). This document is applicable to chain-saws manufactured after its date of publication. NOTE Figure 1 shows an example of a chain-saw within the scope of this document.
- Standard30 pagesEnglish languagesale 15% off
- Standard31 pagesFrench languagesale 15% off
- Draft32 pagesEnglish languagesale 15% off
- Draft32 pagesEnglish languagesale 15% off
- Draft33 pagesFrench languagesale 15% off
This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chain-saws are intended to be used for forest work by only one operator, with the right hand on the rear handle and left hand on the front handle. Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events, with the exception of kickback and balance for machines with an engine displacement of more than 80 cm3, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document is applicable to chain-saws manufactured after its date of publication.
- Standard25 pagesEnglish languagesale 15% off
- Standard28 pagesFrench languagesale 15% off
- Draft26 pagesEnglish languagesale 15% off
- Draft26 pagesEnglish languagesale 15% off
- Draft28 pagesFrench languagesale 15% off
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
- Draft17 pagesEnglish languagesale 15% off
This document gives safety requirements and measures for their verification for the design and construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called machines) having an integral combustion engine as their power unit and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines, as well as when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades. NOTE See Annex C for a list of significant hazards. This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.
- Standard34 pagesEnglish languagesale 15% off
- Standard37 pagesFrench languagesale 15% off
- Draft37 pagesEnglish languagesale 15% off
- Draft37 pagesFrench languagesale 15% off
This document specifies safety requirements, and measures for their verification, for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpack-mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document, taken together with the relevant clauses of ISO 11806-1:2021 (see 4.1), deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the time of publication. NOTE 2 See Annex A, together with ISO 11806-1:2021, Annex A, for a list of significant hazards. This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication. This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.
- Standard10 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
- Draft16 pagesEnglish languagesale 15% off
- Draft18 pagesFrench languagesale 15% off
This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking). This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine. In addition, this document defines requirements for the assembly of supported machine and traction aid winch. It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E). Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements for the safety of many types of supported machines are within the scope of ISO 11850:2011. This document is not applicable to traction aid winches manufactured before the date of its publication.
- Standard40 pagesEnglish languagesale 15% off
- Standard42 pagesFrench languagesale 15% off
- Draft40 pagesEnglish languagesale 15% off
- Draft42 pagesFrench languagesale 15% off
This document specifies terminology and required information as a general framework for identifying and describing the main dimensions and features of wheeled skidders. It is applicable to articulated wheeled cable and grapple skidders. NOTE The terminology and requirements given in this document do not necessarily all apply to a specific machine. Machines can be characterized by the dimensions and features which are relevant to them.
- Standard13 pagesEnglish languagesale 15% off
- Standard14 pagesFrench languagesale 15% off
- Standard14 pagesFrench languagesale 15% off
- Draft13 pagesEnglish languagesale 15% off
This document specifies terminology and required information as a general framework for identifying and describing the main dimensions and features of feller-bunchers. It is applicable to tracked and wheeled feller-bunchers. NOTE The terminology and requirements given in this document do not necessarily all apply to a specific machine. Machines can be characterized by the dimensions and features which are relevant to them.
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
- Draft11 pagesEnglish languagesale 15% off
This European Standard gives safety requirements, and the means of verification, for the design and construction of mobile yarders for logging of forest products and their mounting. It counts for all logging operations with cable yarders both in sloped and flat terrain. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
It deals with the significant hazards (as listed in Table 1), hazardous situations and events relevant to mobile yarders used as intended and under the conditions foreseen by the manufacturer (see Clauses 4 and 5).
It is not applicable to:
- rope splicing,
- ancillary loaders or cable cranes,
- cableways for material transport (other than wood), and
- skidder winches (skidding).
The specifications of cabin in this context are only relevant for the yarder or a yarder-loader combination. The cabin and the chassis of the vehicle (prime mover), to which the yarder is mounted are not part of this document.
The Document deals with all the significant hazards (as listed in Table 1), hazardous situations and events relevant to mobile yarders when they are used as intended and under the conditions of misuse reasonably foreseeable by the manufacturer (see Clauses 4 and 5). This document is not applicable to mobile yarders manufactured before the date of its publication.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a vibration test code for determining, efficiently and under standardized
conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustionengine-powered forest and garden machinery, including chain-saws, brush-cutters, grass-trimmers,
edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers.
Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an
indication of the values to be found in a real work situation.
Vibration test codes, as described in this document, enable the manufacturer to verify the effort
regarding low vibration design.
- Standard39 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and measures for their verification for the design and
construction of portable, hand-held, pole-mounted powered pruners (hereafter named “machine”),
including extendable and telescopic machines, having an integral combustion engine as their power
source. These machines use a power transmission shaft to transmit power to a cutting attachment
consisting of a saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade
with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising
from the use of these machines and the type of information on safe working practices to be provided by
the manufacturer are specified.
This document deals with all significant hazards, hazardous situations or hazardous events with the
exception of electric shock from contact with overhead electric lines (apart from warnings and advice
for inclusion in the instructions), relevant to these machines when they are used as intended and under
conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document is applicable to portable, hand-held, pole-mounted powered pruners manufactured after
its date of publication.
Brush cutters with a circular saw blade are not included in the scope of this document.
NOTE Brush cutter requirements are outlined in ISO 11806-1:2021.
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft34 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and measures for their verification for the design and
construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit
(hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power
to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw
blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the
elimination or reduction of hazards arising from the use of these machines and the type of information
on safe working practices to be provided by the manufacturer are specified.
This document, together with the relevant sections of ISO 11680-1:2021, deals with all significant
hazards, hazardous situations or hazardous events, with the exception of electric shock from contact
with overhead electric lines (apart from warnings and advices for inclusion in the instructions) and
whole-body vibration from the backpack power unit, relevant to these machines when they are used as
intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is
not available at the date of publication.
NOTE 2 See Annex A for a list of significant hazards.
This document is applicable to portable, hand-held, pole-mounted powered pruners with backpack
power unit manufactured after its date of publication.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-engine-powered forest and garden machinery, including chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers. Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an indication of the values to be found in a real work situation. Vibration test codes, as described in this document, enable the manufacturer to verify the effort regarding low vibration design.
- Standard29 pagesEnglish languagesale 15% off
- Standard30 pagesFrench languagesale 15% off
- Draft30 pagesEnglish languagesale 15% off
- Draft30 pagesFrench languagesale 15% off
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
- Draft1 pageEnglish languagesale 15% off
This document specifies a method for testing the performance and fuel consumption of internal combustion engines used to power portable chain-saws.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Draft6 pagesEnglish languagesale 15% off
This document specifies a method for testing the performance and fuel consumption of internal combustion engines used to power portable brush-cutters and grass trimmers.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit (hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document, together with the relevant sections of ISO 11680-1:2021, deals with all significant hazards, hazardous situations or hazardous events, with the exception of electric shock from contact with overhead electric lines (apart from warnings and advices for inclusion in the instructions) and whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the date of publication. NOTE 2 See Annex A for a list of significant hazards. This document is applicable to portable, hand-held, pole-mounted powered pruners with backpack power unit manufactured after its date of publication.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Draft8 pagesEnglish languagesale 15% off
- Draft8 pagesEnglish languagesale 15% off
- Draft8 pagesFrench languagesale 15% off
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners (hereafter named “machine”), including extendable and telescopic machines, having an integral combustion engine as their power source. These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instructions), relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document is applicable to portable, hand-held, pole-mounted powered pruners manufactured after its date of publication. Brush cutters with a circular saw blade are not included in the scope of this document. NOTE Brush cutter requirements are outlined in ISO 11806-1:2021.
- Standard28 pagesEnglish languagesale 15% off
- Standard29 pagesFrench languagesale 15% off
- Draft31 pagesEnglish languagesale 15% off
- Draft31 pagesFrench languagesale 15% off
This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for routers and trimmers.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a noise test code for determining, efficiently and under standardized conditions, the common noise emission characteristics of portable, hand-held, combustion engine powered forest and garden machines, and specific requirements for chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden blowers/vacuums/knapsack mist blowers. Noise emission characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level.
Noise test codes as described in this document enable the manufacturer to verify the effort regarding low noise design.
- Standard47 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft42 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected. This part of EN 50632 sets particular requirements for routers and trimmers.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a noise test code for determining, efficiently and under standardized
conditions, the common noise emission characteristics of portable, hand-held, combustion engine
powered forest and garden machines, and specific requirements for chain-saws, brush-cutters, grasstrimmers,
edgers, pole-mounted powered pruners, hedge-trimmers and garden blowers/vacuums/
knapsack mist blowers. Noise emission characteristics include the A-weighted emission sound pressure
level at the operator position and the A-weighted sound power level.
Noise test codes as described in this document enable the manufacturer to verify the effort regarding
low noise design.
- Standard47 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft42 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method and strength requirements for the handles of portable hand-held chain-saws for use primarily in forestry and tree-service.
- Standard5 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
- Draft6 pagesFrench languagesale 15% off
This document establishes a laboratory test method and performance requirements for thrown object guards (TOG) that provide operator protection against thrown objects. This applies to mobile and self-propelled machinery used in forestry and related operations including, but not limited to, those defined in ISO 6814. The TOG is intended to provide reasonable protection for the operator on the host machine from powered rotating cutting or grinding elements and residual matter thrown by an attachment on the host machine. As the tests in the document are dependent upon the mass, velocity, and the cutting or grinding element profile, the TOG meeting the requirements of this document are specific to each cutting or grinding attachment and the host machine model. This document does not address protection from saw chain shot. NOTE A separate standard ISO 21876 addresses saw chain shot hazards.
- Standard10 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
- Draft10 pagesEnglish languagesale 15% off
- Draft11 pagesFrench languagesale 15% off
This document specifies a noise test code for determining, efficiently and under standardized conditions, the common noise emission characteristics of portable, hand-held, combustion engine powered forest and garden machines, and specific requirements for chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden blowers/vacuums/knapsack mist blowers. Noise emission characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level. Noise test codes as described in this document enable the manufacturer to verify the effort regarding low noise design.
- Standard37 pagesEnglish languagesale 15% off
- Standard37 pagesFrench languagesale 15% off
This document specifies safety requirements and their verification for design and construction of, i.e. self-propelled, mounted, semi-mounted and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping.
This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping components acting as infeed components or by separate integrated infeed components such as rollers or conveyors integral to the infeed chute. Wood chippers may be powered either by an external power take-off, hydraulics etc. or by an integral power source such as an internal combustion engine.
This document does not cover:
- requirements relating to national road regulations arising from transport between work sites;
- hazards arising from any self-propelled function;
- hazards arising from the transmission of power from an external power source - e.g. power take-off drive shafts;
- any machines where the infeed chute is fitted with an extension table or an integrated conveyor that is protruding beyond the outermost lower edge of the infeed chute and the Lower Protective Device of the infeed chute;
- hazards arising from the engine pull starting of an integral power source;
- hazards arising from mechanical loading;
- vertical infeed chute chippers;
- electromagnetic aspects of the chippers;
- shredders/chippers to be covered by EN 13683;
- any machines that are only loaded mechanically;
- additional mechanical discharge systems for woodchips which are not part of the chipping mechanism e.g. conveyors.
For machines that can be both manually and mechanically loaded, this document is only covering the safety of the manual loading.
NOTE 1 Any additional requirements related to use with both mechanical and manual feed that could affect safe use or which are necessary to maintain the integrity of protective devices are outside the scope of this document. Such additional measures are intended to be determined by risk assessment carried out by the manufacturer.
This document deals with all significant hazards, hazardous situations and events relevant to wood chippers, when they are used as intended and under the conditions foreseeable by the manufacturer (see Annex A).
In addition, it specifies the type of information to be provided by the manufacturer on the safe use of these machines.
It is not applicable to environmental hazards (except noise).
NOTE 2 The noise test code described in this standard does not comply with the outdoor noise directive 2000/14/EC.
This document is not applicable to wood chippers which are manufactured before the date of publication of this document by CEN.
- Standard74 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method and corresponding performance requirements for saw chain shot protective windows on forestry machines equipped with a chain saw for cutting, harvesting or processing as defined in ISO 6814. It also applies to machines that have been modified to perform cutting, harvesting or processing (such as excavator) with a chain saw cutting attachment.
- Standard12 pagesEnglish languagesale 15% off
This document specifies the dimensions and clearances for front hand-guards and their openings on portable hand-held chain-saws. These dimensions and clearances ensure the necessary safety provided by the hand-guard, which serves as both a shield between the operator's hand and the saw-chain and as an actuator for manually operated chain brakes. For chain-saws with wrap around handles (see Figure 1), this document is not applicable to the portion of the front handle to the right (when viewed from the rear) of the top brace.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
This document specifies the mechanical strength and dimension requirements, and the corresponding test method for the chain catcher of chain-saws.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies safety requirements and their verification for design and construction of transportable, i.e. self-propelled, mounted, semi-mounted and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping.
This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping components acting as infeed components and by separate integrated infeed components such as rollers or chain conveyors integral to the infeed chute.
The included wood chippers may be designed either for continuous working (loading, feeding and chipping) or for batch-wise operation of loading.
The included wood chippers may be powered either by an external power take-off, hydraulics etc. or by an integral power source such as an internal combustion engine.
- Standard74 pagesEnglish languagesale 10% offe-Library read for1 day