This document specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for use in underground mines and disposed on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183-1. This document does not include requirements for plastics covers. These are agreed upon by the manufacturer and purchaser, taking into account the type of plastics to be used. Related items that are not requirements of this document, but which it is recommended be agreed upon by the manufacturer and purchaser, are included in Annex A. Details recommended to be supplied by the purchaser of belting with an enquiry are given in Annex B. The ability of a belt to run straight cannot be assessed until the belt is installed. Requirements for this are, therefore, outside the scope of this document; nevertheless, recommendations for lateral drift are given in Annex C. Attention is drawn to local regulations for safety which might be in place where the belts are to be used.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off

This document specifies the safety requirements for self-propelled mobile machines used in underground mining, as defined in 3.1.
This document deals with hazards, hazardous situations and hazardous events (see Annex B) relevant to these machines when they are used as intended or under conditions of misuse reasonably foreseeable by the manufacturer.
For utility/service/support machines, this document only includes provisions to address the risks associated with the mobility (movement of the whole machine from one location to another). Risks for the additional functions (e.g. scaling, concrete spraying, bolting, charging, drilling, attachments) are not covered in this document.
This document specifies the appropriate technical measures for eliminating or sufficiently reducing risks arising from hazards, hazardous situations or hazardous events during commissioning, operation and maintenance.
This document does not address:
—          the additional risks for machines operating in potentially explosive atmospheres;
—          air quality and engine emissions.
This document is not applicable to:
—          machines constrained to operate by rails;
—          continuous miners, roadheaders, drill rigs, conveyors, long wall production equipment, tunnel boring machines (TBM), and mobile crushers.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Transfer of CEN WI 00196019 to ISO/TC 82 Mining under the Vienna Agreement (ISO lead).
CEN WI 00196019 "Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles" relates to ISO Reference ISO/CD 19296 (EN 1889-1) Mining and Earthmoving Machinery - Mobile machines working underground - Machine Safety shall be transfered to ISO/TC 82 Mining under the Vienna Agreement (ISO lead). Otherwise there will be the risk of conflicting requirements in Europe. ISO/TC 82 supports the transfer of the work item to ISO/TC 82 under the Vienna Agreement - ISO-lead.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard specifies the safety requirements and tests for self-propelled rubber tyred vehicles as defined in 3.1 intended primarily for use in underground mining (i.e. as mine vehicles) and other underground workings (e.g. as tunnelling vehicles). The electrical supply voltage is limited to 1100 A.C. and 1500 D.C.
1.2   This European Standard deals with all significant hazards, hazardous situations and hazardous events, applying to self-propelled, rubber-tyred vehicles, subject to being used according to their intended purpose and prevailing manufacturer’s conditions and within the scope of foreseeable misuse. This European Standard describes appropriate action to be taken to avoid or minimize the risk of significant hazards.
1.3   This European Standard does not include rubber tyred drilling rigs, which are covered by EN 791, or earth-moving machinery not intended primarily for use in underground mines, which are covered by EN 474 (all parts). This European Standard does not take account of specific hazards associated with special-purpose vehicles, e.g. tankers, explosives vehicles.
This standard does not cover the use and operation of rubber-tyred vehicles being remotely controlled or operation in potentially explosive atmospheres.
1.4   This European Standard applies to vehicles which are manufactured after the date of issue of this standard.
1.5   This European standard does not consider the use of vehicles in explosive atmosphere.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the safety requirements and tests for rail locomotives for use in underground mining (i.e. mine locomotives) and other underground workings (e.g. tunnelling locomotives).
1.1   This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, the operation and the maintenance of locomotives when carried out in accordance with the specifications given by the manufacturer or his authorised representative.
1.2   This European standard does not address the special hazards associated with the rack drive of rack and pinion locomotives.
1.3   This European standard does not deal with radiation and vibration.  It does not address remote control locomotives or operation in potentially explosive atmospheres.  Hazards due to noise are excluded from this standard, but a separate standard is in preparation where hazards due to noise will be addressed.1.4   This European standard applies to locomotives which are manufactured after the date of issue of this standard.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard specifies the safety requirements for armoured face conveyors and covers, conveyor drive units, return units, line pans, chain assemblies, devices for tensioning and locking chains.
This European Standard does not apply to stage loader ancillaries, armoured face conveyors which form part of mineral bunker systems or operate as spillage conveyors, to haulage systems and guides utilised by extraction machines, to the technical requirements for cable-less remote controls, to compressed air powered machines, or to the interfaces between the elements of the conveyor and other machine installations.
Armoured face conveyors are designed for the transport of minerals and rock only.
NOTE   Armoured face conveyors can be used as a base for guiding the extraction machine and as a link between the face roof support and the extraction machine if required.
This European Standard deals with all hazards, hazardous situations and events for the use in mines, when they are used as intended and for the conditions foreseen by the manufacturer.  See clause 4 for the hazards dealt with.
1.2   This European Standard does not cover any hazards resulting from the electrical equipment associated with the machine.  It does not contain any requirements relating to dust suppression or firedamp hazards. Hazards due to noise are also excluded from this European Standard, but a separate European Standard is in preparation where hazards due to noise will be addressed.
It is intended for manufacturers producing and marketing complete machines, and for manufacturers assembling new parts from different origins or assembling new machines even for their own use.  These are called "manufacturers" in this European Standard.
1.3   This European Standard applies to armoured face conveyors which are manufactured after the date of issue of this European Standard.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the safety requirements and tests for rail locomotives for use in underground mining (i.e. mine locomotives) and other underground workings (e.g. tunnelling locomotives).
1.1   This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, the operation and the maintenance of locomotives when carried out in accordance with the specifications given by the manufacturer or his authorised representative.
1.2   This European standard does not address the special hazards associated with the rack drive of rack and pinion locomotives.
1.3   This European standard does not deal with radiation and vibration.  It does not address remote control locomotives or operation in potentially explosive atmospheres.  Hazards due to noise are excluded from this standard, but a separate standard is in preparation where hazards due to noise will be addressed.1.4   This European standard applies to locomotives which are manufactured after the date of issue of this standard.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard specifies the safety requirements for armoured face conveyors and covers, conveyor drive units, return units, line pans, chain assemblies, devices for tensioning and locking chains.
This European Standard does not apply to stage loader ancillaries, armoured face conveyors which form part of mineral bunker systems or operate as spillage conveyors, to haulage systems and guides utilised by extraction machines, to the technical requirements for cable-less remote controls, to compressed air powered machines, or to the interfaces between the elements of the conveyor and other machine installations.
Armoured face conveyors are designed for the transport of minerals and rock only.
NOTE   Armoured face conveyors can be used as a base for guiding the extraction machine and as a link between the face roof support and the extraction machine if required.
This European Standard deals with all hazards, hazardous situations and events for the use in mines, when they are used as intended and for the conditions foreseen by the manufacturer.  See clause 4 for the hazards dealt with.
1.2   This European Standard does not cover any hazards resulting from the electrical equipment associated with the machine.  It does not contain any requirements relating to dust suppression or firedamp hazards. Hazards due to noise are also excluded from this European Standard, but a separate European Standard is in preparation where hazards due to noise will be addressed.
It is intended for manufacturers producing and marketing complete machines, and for manufacturers assembling new parts from different origins or assembling new machines even for their own use.  These are called "manufacturers" in this European Standard.
1.3   This European Standard applies to armoured face conveyors which are manufactured after the date of issue of this European Standard.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183-1. This International Standard does not include requirements for plastics covers. These will need to be agreed upon by the manufacturer and purchaser, taking into account the type of plastics to be used. Related items that are not requirements of this International Standard, but which it is recommended be agreed upon by the manufacturer and purchaser, are included in Annex A. Details recommended to be supplied by the purchaser of belting with an enquiry are given in Annex B. The ability of a belt to run straight cannot be assessed until the belt is installed. Requirements for this are, therefore, outside the scope of this International Standard; nevertheless, recommendations for lateral drift are given in Annex C.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies: a) the dimensional characteristics; b) the mechanical characteristics; c) the conditions with which coatings, if any, shall comply; d) the conditions of sampling and control. Applies to round, bright or zinc-coated wires of nominal diameters between 0,8 mm and 3,5 mm. This second edition cancels and replaces the first edition (1981).

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

Specifies: a) the dimensional tolerances; b) the mechanical characteristics; c) the conditions with which coatings, if any, shall comply; d) the conditions of sampling and control. Applies to round, bright or zinc-coated wires of nominal diameters between 1 mm and 3,5 mm.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

Specifies the nature and properties of the components together with the corresponding test methods. Describes the determination of water-soluble acids, the salt content, and the extractable content (dry matter and water content) as well as the expression of results.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

Specifies those properties of ropes and of their component parts which form a basis for acceptance. Does not apply to full-lock coil ropes, balance ropes and flat ropes used in mines. The characteristics of the wire to be used for the manufacture of these ropes are not covered. Annex A gives an example of a works certificate; annex B gives an example of a full works certificate.This second edition cancels and replaces the first edition (1976).

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

Specifies the nature and properties of impregnating compounds and lubricants together with the corresponding test methods. Annex A tabulates suggested qualification and quality control tests. Annex B describes suggested test methods.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This second edition cancels and replaces the first edition (1984). Specifies the requirements for a range of scraper bars for use in twin outboard chain assemblies made from chains complying with ISO 610 and associated shackle type connectors complying with ISO 1082. The figures illustrate shapes and reference quantities of concern. Tabulates the dimensions and strength rating of scraper bars.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

This second edition cancels and replaces the first edition (1984). Specifies the requirements for a range of connector units. Each unit consists of the following components: shackle type connector, connector bolt, connector nut. It does not indicate a complete design, but it gives sufficient detail to ensure dimensional compatibility with chains complying with ISO 610 and scraper bars complying with ISO 5612.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    French language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off

Specifies the requirements for a range of sprocket assemblies for use in twin outboard chain assemblies. These assemblies incorporate sprocket rings designed to accept chains complying with ISO 610, shackle type connectors complying with ISO 1082, and scraper bars complying with ISO 5612. It tabulates the dimensions and the figures illustrate shapes and reference quantities of concern. An annex gives design formulae.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off

Gives guidance on methods of verifying sprocket dimensions specified in ISO 5613. Specifies those dimensions which should be measured to ensure compatibility between chain and sprocket.

  • Technical report
    1 page
    English language
    sale 15% off
  • Technical report
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies: a) the dimensional characteristics; b) the mechanical characteristics; c) the conditions with which coatings, if any, shall comply; d) the conditions of sampling and control. Applies to round, bright or zinc-coated wires of nominal diameters between 0,8 mm and 3,5 mm. This second edition cancels and replaces the first edition (1981).

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

Gives guidance on methods of verifying sprocket dimensions specified in ISO 5613. Specifies those dimensions which should be measured to ensure compatibility between chain and sprocket.

  • Technical report
    1 page
    English language
    sale 15% off
  • Technical report
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    French language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off

This second edition cancels and replaces the first edition (1984). Specifies the requirements for a range of connector units. Each unit consists of the following components: shackle type connector, connector bolt, connector nut. It does not indicate a complete design, but it gives sufficient detail to ensure dimensional compatibility with chains complying with ISO 610 and scraper bars complying with ISO 5612.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

This second edition cancels and replaces the first edition (1984). Specifies the requirements for a range of scraper bars for use in twin outboard chain assemblies made from chains complying with ISO 610 and associated shackle type connectors complying with ISO 1082. The figures illustrate shapes and reference quantities of concern. Tabulates the dimensions and strength rating of scraper bars.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

Specifies those properties of ropes and of their component parts which form a basis for acceptance. Does not apply to full-lock coil ropes, balance ropes and flat ropes used in mines. The characteristics of the wire to be used for the manufacture of these ropes are not covered. Annex A gives an example of a works certificate; annex B gives an example of a full works certificate.This second edition cancels and replaces the first edition (1976).

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

Specifies the requirements for a range of sprocket assemblies for use in twin outboard chain assemblies. These assemblies incorporate sprocket rings designed to accept chains complying with ISO 610, shackle type connectors complying with ISO 1082, and scraper bars complying with ISO 5612. It tabulates the dimensions and the figures illustrate shapes and reference quantities of concern. An annex gives design formulae.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off

Specifies the nature and properties of impregnating compounds and lubricants together with the corresponding test methods. Annex A tabulates suggested qualification and quality control tests. Annex B describes suggested test methods.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

Specifies the nature and properties of the components together with the corresponding test methods. Describes the determination of water-soluble acids, the salt content, and the extractable content (dry matter and water content) as well as the expression of results.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

ISO 22721:2007 specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183‑1. ISO 22721:2007 does not include requirements for plastics covers.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 22721:2007 specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183‑1. ISO 22721:2007 does not include requirements for plastics covers.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard specifies the safety requirements and tests for self-propelled rubber tyred vehicles as defined in 3.1 intended primarily for use in underground mining (i.e. as mine vehicles) and other underground workings (e.g. as tunnelling vehicles). The electrical supply voltage is limited to 1100 A.C. and 1500 D.C.
1.2   This European Standard deals with all significant hazards, hazardous situations and hazardous events, applying to self-propelled, rubber-tyred vehicles, subject to being used according to their intended purpose and prevailing manufacturer’s conditions and within the scope of foreseeable misuse. This European Standard describes appropriate action to be taken to avoid or minimize the risk of significant hazards.
1.3   This European Standard does not include rubber tyred drilling rigs, which are covered by EN 791, or earth-moving machinery not intended primarily for use in underground mines, which are covered by EN 474 (all parts). This European Standard does not take account of specific hazards associated with special-purpose vehicles, e.g. tankers, explosives vehicles.
This standard does not cover the use and operation of rubber-tyred vehicles being remotely controlled or operation in potentially explosive atmospheres.
1.4   This European Standard applies to vehicles which are manufactured after the date of issue of this standard.
1.5   This European standard does not consider the use of vehicles in explosive atmosphere.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the safety requirements and type tests for self-propelled rubber tyred vehicles intended primarily for use in underground mines. This European standard identifies and takes account of the hazards arising from the use in mines of such equipment and describes methods for the elimination or reduction of these hazards and for the safeguarding of personnel machinery. These hazards are listed under clause 4.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the safety requirements and type tests for self-propelled rubber tyred vehicles intended primarily for use in underground mines. This European standard identifies and takes account of the hazards arising from the use in mines of such equipment and describes methods for the elimination or reduction of these hazards and for the safeguarding of personnel machinery. These hazards are listed under clause 4.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the safety requirements and tests for locomotives for use in underground mining (i.e. mine locomotives) and other underground workings (e.g. tunnelling locomotives). This European standard identifies and takes account of the hazards arising from the use in mines and other underground workings of such equipment and describes methods for the elimination or reduction of these hazards, and for the safeguarding of personnel and machinery. These hazards are listed under clause 4.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the safety requirements and tests for locomotives for use in underground mining (i.e. mine locomotives) and other underground workings (e.g. tunnelling locomotives). This European standard identifies and takes account of the hazards arising from the use in mines and other underground workings of such equipment and describes methods for the elimination or reduction of these hazards, and for the safeguarding of personnel and machinery. These hazards are listed under clause 4.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 22721:2007 specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183‑1. ISO 22721:2007 does not include requirements for plastics covers.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off

Specifies: a) the dimensional tolerances; b) the mechanical characteristics; c) the conditions with which coatings, if any, shall comply; d) the conditions of sampling and control. Applies to round, bright or zinc-coated wires of nominal diameters between 1 mm and 3,5 mm.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    19 pages
    French language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off