iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

77.140.85 - Iron and steel forgings

ICS 77.140.85 Details

Iron and steel forgings

Schmiedestucke

Pieces forgées

Železni in jekleni kovani izdelki

General Information

Parent
77.140 - Iron and steel products

e-Library Subscription

Create subscription and get permanent access to documents within 77.140.85 - Iron and steel forgings

Type
Monthly Subscription
for
seat
×
$ 113.59
$ 113.59

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
SIST
SIST EN 4627:2023(Main)
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
EN 4627:2022

This document specifies the requirements relating to:
Steel X4CrNiMo16-5-1 (1.4418)
Air melted
Hardened and tempered
Forgings
De ≤ 200 mm
1 150 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.
NOTE   Other common designations:
-   AIR: Z 8 CND 17-04.
-   Only the chemical composition according to this document is considered.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-1:2022(Main)
Open die steel forgings for general engineering purposes - Part 1: General requirements
SIST EN 10250-1:2022

This document specifies the general technical delivery conditions for open die forgings, forged bars, and products pre-forged and finished in ring rolling mills, for general engineering purposes.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-2:2022(Main)
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
SIST EN 10250-2:2022

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from non-alloy quality and special steels and supplied in the normalized, normalized and tempered, quenched and tempered or annealed condition.
The majority of steels listed in this document, with properties in the quenched and tempered condition up to 160 mm thickness, are identical to steels specified in EN ISO 683-1 and EN ISO 683-2 and more extensive information on hardenability and technological properties is given in these standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-3:2022(Main)
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
SIST EN 10250-3:2022

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from alloy special steel and supplied in the quenched and tempered condition.
The majority of steels listed in this document are identical to steels specified in EN ISO 683-1 and EN ISO 683-2 and more extensive information on hardenability and technological properties is given in these standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10250-1:2022(Main)
Open die steel forgings for general engineering purposes - Part 1: General requirements
EN 10250-1:2022

This document specifies the general technical delivery conditions for open die forgings, forged bars, and products pre-forged and finished in ring rolling mills, for general engineering purposes.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10250-3:2022(Main)
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
EN 10250-3:2022

This part of this European Standard specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from alloy special steel and supplied in the quenched and tempered condition. Note: The majority of steels listed in this Part of EN 10250 are identical to steels specified in EN 10083-1 and more extensive information on hardenability and technological properties is given in that European Standard.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10250-2:2022(Main)
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
EN 10250-2:2022

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from non-alloy quality and special steels and supplied in the normalized, normalized and tempered, quenched and tempered or annealed condition
The majority of steels listed in this document, with properties in the quenched and tempered condition up to 160 mm thickness, are identical to steels specified in EN 10083-1 and EN 10083-2 and more extensive information on hardenability and technological properties is given in these standards.
General Information on technical delivery conditions is given in EN 10021.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10222-2:2017+A1:2021(Main)
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
SIST EN 10222-2:2017+A1:2021

This part of this European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of ferritic and martensitic steels with specified elevated temperature properties. Chemical composition and mechanical properties are specified.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery condition is given in EN 10021.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10222-4:2017+A1:2021(Main)
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
SIST EN 10222-4:2017+A1:2021

This European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of weldable fine grain steels with high proof strength.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-4:2021(Main)
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
SIST EN 10250-4:2021

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from stainless steels with ferritic, martensitic, austenitic and austenitic-ferritic structures.
NOTE The majority of steels listed in this part of EN 10250 are identical to steels specified EN 10088-3 and EN 10028-7, and more extensive information on properties is given in these European Standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10222-4:2017+A1:2021(Main)
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
EN 10222-4:2017+A1:2021

This European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of weldable fine grain steels with high proof strength.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10222-2:2017+A1:2021(Main)
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 10222-2:2017+A1:2021

This part of this European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of ferritic and martensitic steels with specified elevated temperature properties. Chemical composition and mechanical properties are specified.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery condition is given in EN 10021.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10250-4:2021(Main)
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
EN 10250-4:2021

This Part of this European Standard specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from stainless steels with ferritic, martensitic, austenitic and austenitic-ferritic structures. Note: The majority of steels listed in this Part of EN 10250 are identical to steels specified EN 10088-3 and more extensive information on properties is given in that European Standard. General information on technical delivery conditions is given in EN 10021.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2476:2020(Main)
Aerospace series - Steel 30CrNiMo8 (1.6580) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm
EN 2476:2019

This document specifies the requirements relating to: Steel 30CrNiMo8 (1.6580) 1 100 MPa ≤ Rm ≤ 1 300 MPa Forgings - De ≤ 100 mm for aerospace applications. W.nr: 1.6580 ASD-STAN designation: FE-PL74.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2451:2020(Main)
Aerospace series - Steel 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Forgings - De ≤ 40 mm
EN 2451:2019

This document specifies the requirements relating to: Steel 31Ni10 1 230 MPa ≤ Rm ≤ 1 420 MPa Forgings De ≤ 40 mm for aerospace applications. ASD-STAN designation: FE-PL73.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2503:2020(Main)
Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Forgings - De ≤ 150 mm
EN 2503:2019

This document specifies the requirements relating to: Steel X5CrNoMoCuNb14-5 (1.4594) 930 MPa ≤ Rm ≤ 1 080 MPa Forgings De ≤ 150 mm for aerospace applications. ASD-STAN designation: FE-PM66.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3486:2020(Main)
Aerospace series - Steel FE-PM67 - Solution annealed and precipitation hardened - 1 400 ≤ Rm ≤ 1 550 MPa - Forgings - De ≤ 100 mm
EN 3486:2019

This document specifies the requirements relating to: Steel X3CrNiMoAl13-8-2 (1.4534) Solution annealed and precipitation hardened 1 400 ≤ Rm ≤ 1 550 MPa Forgings De ≤ 100 mm for aerospace applications. ASD-STAN designation: FE-PM67.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3470:2019(Main)
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1 200 MPa ≤ Rm ≤ 1 400 MPa
EN 3470:2019

This document specifies the requirements relating to:
Steel FE-PM1503 (X3CrNiMoAl13-8-2)
Vacuum induction melted and consumable electrode remelted
Solution treated and precipitation treated
Forgings
a or D ≤ 150 mm
1 200 MPa ≤ Rm ≤ 1 400 MPa
for aerospace applications.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 15461:2018(Main)
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests

ISO 15461:2018 gives guidelines for the simplification and harmonization of the specifications for mechanical testing of open die and closed die forgings in International Standards and other technical delivery conditions for forgings of steel. ISO 15461:2018 a) offers various options for the frequency of testing, and sampling conditions, b) introduces a designation system for the options, mentioned under (a), and c) specifies the test methods for room temperature tensile tests, elevated temperature tensile tests, impact tests, and uniformity checks by hardness tests.

  • Standard
    24 pages
    English language
    sale 15% off
CEN
EN 10222-1:2017(Main)
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
SIST EN 10222-1:2017

This Part of this European Standard specifies the general technical delivery conditions for open die steel forgings, ring rolled products and forged bars for pressure purposes.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222−5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10222-5:2017(Main)
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
SIST EN 10222-5:2017

This European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of stainless steels, including creep resisting steels. Chemical composition and mechanical properties are specified.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222−5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10222-3:2017(Main)
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
SIST EN 10222-3:2017

This European Standard specifies the technical delivery conditions of forgings for pressure purposes, made of nickel steels, for use at low temperatures.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10222-3:2017(Main)
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
EN 10222-3:2017

This Part of this European Standard specifies the technical delivery conditions of forgings for pressure purposes, made of nickel steels, for use at low temperatures. General information on technical delivery conditions is given in EN 10021.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10222-5:2017(Main)
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and ferritic-austenitic stainless steels
EN 10222-5:2017

This Part of this European Standard specifies the technical delivery conditions for forgings for pressure purposes made of stainless steels, including creep resisting steels. Chemical composition and mechanical properties are specified. General information on technical delivery conditions is given in EN 10021.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10222-1:2017(Main)
Steel forgings for pressure purposes - Part 1: General requirements
EN 10222-1:2017

This Part of this European Standard specifies the general technical delivery conditions for open die steel forgings, ring rolled products and forged bars for pressure purposes. General information on technical delivery conditions is given in EN 10021.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10228-1:2016(Main)
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
SIST EN 10228-1:2016

This European Standard describes techniques and acceptance criteria to be used for the magnetic particle testing of forgings manufactured from ferromagnetic materials. The method described is used for the detection of surface discontinuities. It can also detect discontinuities just below the surface but the sensitivity to such discontinuities decreases rapidly with depth.
NOTE   A steel forging is considered to be ferromagnetic if the magnetic flux density is greater than 1 T for a tangential magnetic field strength of 2,4 kA/m.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10228-4:2016(Main)
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
SIST EN 10228-4:2016

This European Standard describes techniques for the manual, pulse-echo, ultrasonic testing of forgings manufactured from austenitic and austenitic-ferritic stainless steels. Mechanized scanning techniques, such as immersion testing, may be used but should be agreed between the purchaser and supplier (see Clause 4).
This part of EN 10228 applies to four types of forgings, classified according to their shape and method of production. Types 1, 2 and 3 are essentially simple shapes. Type 4 covers complex shapes.
This part of EN 10228 does not apply to:
-   closed die forgings;
-   turbine rotor and generator forgings.
Ultrasonic testing of ferritic and martensitic steel forgings is the subject of Part 3 of this European Standard.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10228-2:2016(Main)
Non-destructive testing of steel forgings - Part 2: Penetrant testing
SIST EN 10228-2:2016

This European Standard describes techniques and acceptance criteria to be used for the penetrant testing of steel forgings. The method described is used for the detection of surface discontinuities.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10228-3:2016(Main)
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
SIST EN 10228-3:2016

This European Standard describes techniques to be used for the manual, pulse-echo, ultrasonic testing of forgings manufactured from ferritic and martensitic steel. Mechanized scanning techniques, such as immersion testing, may be used but should be agreed between the purchaser and supplier (see Clause 4).
This part of EN 10228 applies to four types of forgings, classified according to their shape and method of production. Types 1, 2 and 3 are essentially simple shapes. Type 4 covers complex shapes.
This part of EN 10228 does not apply to:
-   closed die forgings;
-   turbine rotor and generator forgings.
Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings is the subject of EN 10228-4.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10228-4:2016(Main)
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 10228-4:2016

This Part of EN 10228 specifies methods for the manual, pulse-echo, ultrasonic testing of forgings manufactured from austenitic and ferritic-austenitic stainless steels. Mechanised scanning techniques, such as immersion testing, may be used but should be agreed between the purchaser and supplier.
This Part of EN 10228 applies to four types of forgings, classified according to their shape and method of production. Types 1, 2 and 3 are essentially simple shapes. Type 4 covers complex shapes.
This Part of EN 10228 does not apply to
-  rolled bars,
-  turbine rotor and generator forgings.
Ultrasonic testing of ferritic and martensitic steel forgings is the subject of Part 3 of EN 10228.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10228-1:2016(Main)
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-1:2016

This Part of EN 10228 describes the method and acceptance criteria to be used for the magnetic particle testing of forgings manufactured from ferromagnetic materials. The method described is used for the detection of surface discontinuities. It can also detect discontinuities just below the surface but the sensitivity to such discontinuities decreases rapidly with depth.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10228-2:2016(Main)
Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-2:2016

This Part of EN 10228 describes the method and acceptance criteria to be used for the penetrant testing of steel forgings. The method described is used for the detection of surface discontinuities.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10228-3:2016(Main)
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-3:2016

This Part of EN 10228 describes the techniques to be used for the manual, pulse-echo, ultrasonic testing of forgings manufactured from ferritic and martensitic steel. Mechanised scanning techniques, such as immersion testing, may be used but should be agreed between the purchaser and supplier (see Clause 4).
This Part of EN 10228 applies to four types of forgings, classified according to their shape and method of production. Types 1, 2 and 3 are essentially simple shapes. Type 4 covers complex shapes.
This Part of EN 10228 does not apply to
- closed die forgings,
- turbine rotor and generator forgings.
Ultrasonic testing of austenitic and ferritic-austenitic stainless steel forgings is the subject of Part 4 of EN 10228.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10360:2015(Main)
Hot, warm or cold forging - Repair conditions prior to delivery
SIST EN 10360:2015

This European Standard defines the forged components surface repair conditions and control to preserve their functionality.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10360:2015(Main)
Hot, warm or cold forgings - Repair conditions prior to delivery
EN 10360:2015

This European Standard defines the forged components surface repair conditions and control to preserve their functionality.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4700-006:2011(Main)
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
EN 4700-006:2010

This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of wrought products in steel and heat resisting alloys. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4700-005:2011(Main)
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
EN 4700-005:2010

This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy forging stock. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10243-2:2000/AC:2005(Amendment)
Steel die forgings - Tolerances on dimensions - Part 2: Upset forging made on horizontal forging machines
EN 10243-2:1999/AC:2005

TC - Table 4, 3rd column, addition of "d"

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10243-1:2000/AC:2005(Amendment)
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings
EN 10243-1:1999/AC:2005

TC - Table 4, 3rd column, addition of "d"

  • Amendment
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10243-2:1999/AC:2005(Corrigendum)
Steel die forgings - Tolerances on dimensions - Part 2: Upset forging made on horizontal forging machines
SIST EN 10243-2:2000/AC:2005

TC - Table 4, 3rd column, addition of "d"

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10243-1:1999/AC:2005(Corrigendum)
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings
SIST EN 10243-1:2000/AC:2005

TC - Table 4, 3rd column, addition of "d"

  • Amendment
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10031:2003(Main)
Semi-finished products for forging - Tolerances on dimensions shape and mass
EN 10031:2003

This European Standard specifies the tolerances on dimensions, shape and mass for semi-finished products intended to undergo hot forming by forging, i.e. blooms, slabs and billets made of:
- general purpose steels, in accordance with EN 10250-1 to 4;
- steels for pressure purposes, in accordance with EN 10222-1 to 5.
It does not cover semi-finished products intended for drop forging which are covered by EN 10243-1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10031:2003(Main)
Semi-finished products for forging - Tolerances on dimensions shape and mass
SIST EN 10031:2003

This European Standard specifies the tolerances on dimensions, shape and mass for semi-finished products intended to undergo hot forming by forging, i.e. blooms, slabs and billets made of:
- general purpose steels, in accordance with EN 10250-1 to 4;
- steels for pressure purposes, in accordance with EN 10222-1 to 5.
It does not cover semi-finished products intended for drop forging which are covered by EN 10243-1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10243-1:2000(Main)
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings
EN 10243-1:1999

1.1 This European Standard specifies the dimensional tolerances for steel drop and vertical press forgings made under hammers and presses. The first part of this European Standard applies to hot forgings in the delivery condition, made in carbon and alloy steels. The tolerances specified apply to forgings not exceeding 250 kg in mass or 2 500 mm maximum dimension. Tolerances for heavier or larger forgings shall be agreed at the time of enquiry and order.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10254:2000(Main)
Steel closed die forgings - General technical delivery conditions
EN 10254:1999

This European Standard specifies the general delivery conditions for steel closed die forgings. These forgings are produced by blow or pressure of the heated product at a suitable temperature (hot or warm) in a die, which in the forming process shapes the material to the form of the die. Similar products such as warm extrusions and upset forgings, are also regarded as part of the process.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10243-2:2000(Main)
Steel die forgings - Tolerances on dimensions - Part 2: Upset forging made on horizontal forging machines
EN 10243-2:1999

1.1 This European Standard specifies the dimensional tolerances for steel upset forgings made on horizontal forging machines. The second part of this European Standard applies to hot upset forgings, in the delivery condition, made in carbon and alloy steels. The tolerances specified apply to forgings not exceeding 250 kg in mass or 2 500 mm maximum dimension. Tolerances for heavier or layer forgings are subjected to negociation.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10243-2:1999(Main)
Steel die forgings - Tolerances on dimensions - Part 2: Upset forging made on horizontal forging machines
SIST EN 10243-2:2000

1.1 This European Standard specifies the dimensional tolerances for steel upset forgings made on horizontal forging machines. The second part of this European Standard applies to hot upset forgings, in the delivery condition, made in carbon and alloy steels. The tolerances specified apply to forgings not exceeding 250 kg in mass or 2 500 mm maximum dimension. Tolerances for heavier or layer forgings are subjected to negociation.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10254:1999(Main)
Steel closed die forgings - General technical delivery conditions
SIST EN 10254:2000

This European Standard specifies the general delivery conditions for steel closed die forgings. These forgings are produced by blow or pressure of the heated product at a suitable temperature (hot or warm) in a die, which in the forming process shapes the material to the form of the die. Similar products such as warm extrusions and upset forgings, are also regarded as part of the process.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10243-1:1999(Main)
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings
SIST EN 10243-1:2000

1.1 This European Standard specifies the dimensional tolerances for steel drop and vertical press forgings made under hammers and presses. The first part of this European Standard applies to hot forgings in the delivery condition, made in carbon and alloy steels. The tolerances specified apply to forgings not exceeding 250 kg in mass or 2 500 mm maximum dimension. Tolerances for heavier or larger forgings shall be agreed at the time of enquiry and order.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 9327-5:1999(Main)
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless steels

1.1 This part of ISO 9327 applies to forgings and rolled or forged bars manufactured from the austenitic and austenitic-ferritics steels given in Table 1 and delivered according to the specifications given in ISO 9327-1. 1.2 This part of ISO 9327 covers the following data: a) In Table 1 the limits for the chemical composition according to the cast analysis; the tensile properties at room temperature; the indications on the usual heat treatment condition at the time of delivery; b) in Table 2 the permissible deviations of the results of the product analysis from the specified limits for the cast analysis, c) in Table 3 the minimum elevated temperature proof strength values; d) in Table 4 the estimated average stress rupture properties.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
50