This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable log band sawing machines with either manual or automatic loading and/or unloading, hereinafter referred to as machines, designed to cut solid wood, when they are used as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse.
This European Standard does not apply to:
a)   table band saws and band re-saws;
NOTE 1   Table band saws and band re-saws are covered by EN 1807-1.
b)   specific hazards related to automatic loading and/or unloading;
c)   any hazards relating to the combination of a single machine being used with any other machine (as part of a line e.g. loading and/or unloading automated systems);
d)   any hazards arising from any other machining processes (e.g. milling and sawing) related to associated machines or cutting groups, e.g. canters and circular saws.
This European Standard does not deal with the specific hazards related to thermal engine and P.T.O. equipment fitted to the machine.
This European Standard is not applicable to machines manufactured before the date of its publication as EN.
NOTE 2   Machines with manual loading and/or unloading covered by this document are listed under 4 of Annex IV of the Machinery Directive.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is applicable except as follows: Addition: This European Standard applies to planers, thicknessers and combined planers and thicknessers intended for cutting wood and analogous materials with a maximum planing width of 330 mm.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Refers to the characteristics of chisels and gouges for woodworking.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

ISO 7294 is not intended to standardize certain tooth types. Deals with saw blades for hand saws or machine saws. The designation system established in ISO 7294 is not applicable to saw blades with ahrd metal tips. Gives in addition to the terms in English and French the equivalent terms in Italian in an annex.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to planers.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Superseded by EN 60745-2-14:2009

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Amandma A11:2007 je dodatek k standardu SIST EN 60745-2-14:2004
Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for planners. The rated voltage being not more than 250 V for single-phase a.c. or d.c. and 440 V for three-phase a.c. tools.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is applicable except as follows:
1.1 Addition:
This standard applies to planers.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the determination of the maximum speed for given eccentricity at clamping devices for the shank strength of milling tools with cylindrical shank. It shall be applied to shank mounted milling tools for woodworking irrespective whether they are mounted perpendicularly or horizontally. This standard shall be used as a complement of EN 847-1. The design of this type of shank mounted milling tools shall be in accordance with the relevant clauses of EN 847-1.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies all hazards arising from the design of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 5. This document does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the determination of the maximum speed for given eccentricity at clamping devices for the shank strength of milling tools with cylindrical shank. It shall be applied to shank mounted milling tools for woodworking irrespective whether they are mounted perpendicularly or horizontally.  This standard shall be used as a complement of EN847-1. The design of this type of shank mounted milling tools shall be in accordance with the relevant clauses of EN847-1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for planners. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Incorporates AB and A1 * Superseded by EN 60745-2-14:2003

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies all hazards arising from the design of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 5. This document does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard is applicable to all hazards arising from the design and use of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. Part 1 of the standard deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shankmounted milling tools. The hazards are listed in clause 5.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Incorporates AB and A1 * Superseded by EN 60745-2-14:2003

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to planers with a cutting width up to 150 mm. NOTE - For planers with a cutting width above 150 mm other requirements may apply.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

A1 incorporated in HD * Superseded by EN 50144-2-15:1996

  • Standardization document
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Takes into account new amdts following LVD art 9 * Superseded by EN 50144-2-5:1996

  • Standardization document
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Contains the nomenclature and specifies the characteristics of metal-bodied bench planes, plane cutters and cap irons. Replaces the first edition of ISO 2726 as well as ISO 2728, which have been technically revised.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off