This document specifies safety requirements.
This document is applicable to pulpers and their loading facilities intended for use in paper making as well as for pulpers used in pulp drying machines and is intended to be used together with EN 1034 1:2021.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to pulpers and their loading facilities, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document does not apply to pulpers and their loading facilities that have been manufactured before the date of publication of this document.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the essential characteristics and the principles of calibration of fixed platen compression testing equipment used in the testing of paper, board, and corrugated fibreboard.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This European Standard applies to pulpers and their loading facilities intended for use in paper making and shall be used together with EN 1034-1:2000+A1:2009. It deals with all significant hazards, hazardous situations and hazard events relevant to pulpers and their loading facilities, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
This European Standard is not applicable to pulpers and their loading facilities that have been manufactured before the date of publication of this standard.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies safety requirements.
This document is applicable to paper making and paper finishing machines. It contains definitions and requirements which apply to all paper making and paper finishing machines listed in Annex A and is intended to be used in connection with the specific part applicable for the respective machine listed in Annex A. Specific parts can contain additional requirements or deviations from EN 1034-1 in which case the specific stipulations take precedence over the specification made in EN 1034-1. The standard deals with the hazards listed in Annex B.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to paper making and paper finishing machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5.
This document applies to machines produced after the date of publication of this standard.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This standard applies to paper making and paper finishing machines. It contains definitions and requirements which apply to all paper making and paper finishing machines listed in annex A and shall be used in connection with the specific part applicable for the respective machine listed in annex A. Specific parts can contain additional requirements or deviations from EN 1034-1 in which case the specific stipulations take precedence over the specification made in EN 1034-1. The standard deals with the hazards listed in 4.
1.2   This standard does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5.
1.3   This standard applies to machines produced after............. (date of CEN approval).

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to coating machines applying the wet process for off-line coating of base paper including unwind unit, coating units, drying section, flotation and infrared dryer, smoothing unit, integrated calender, measuring device, reel-up, integrated sheeter, drives and control system and applies together with
EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to coating machines, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This document does not deal with pressure hazards in steam-heated drying cylinders.
NOTE    Directive 97/23/EC gives essential safety requirements for equipment under pressure.
This document does not apply to:
-   paper and board making machines,
-   equipment for the treatment of coating substances,
-   coating machines using solvent-based colours,
-   coating machines applying silicon, adhesives or resin onto the paper web,
-   printing and varnishing machines,
-   integrated conveyors and cranes designed for transporting reels/shells (reel spools) and for machine maintenance,
-   integrated fire extinguishing equipment.
This document is not applicable to coating machines which are manufactured before the date of publication as an EN.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to tissue making machines for the production of soft and crepe paper and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to tissue making machines when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This document does not deal with pressure hazards in steam-heated drying cylinders and Yankee cylinders.
NOTE   Directive 97/23/EC give essential safety requirements for equipment under pressure.
This document does not apply to:
-   paper and board making machines;
-   tissue winder (plying machines);
-   tissue converting machines.
At this stage this standard does not deal with tissue making machines which apply the dry process for sheet forming. These machines are intended to be included in the standard at a later date.
This document is not applicable to tissue making machines which are manufactured before the date of publication of this document by CEN.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to roll packaging machines for use in papermaking and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazardous events relevant to roll packaging machines, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This document is not applicable to roll packaging machines which are manufactured before the date of publication as an EN.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to roll handling systems for use in paper finishing and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazardous events relevant to roll handling systems, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not apply to: - machine reel handling systems; - stacker trucks, industrial trucks and driverless industrial trucks; - separate storage systems with cranes and high bay storage systems; - portable devices for moving rolls. This European Standard is not applicable to roll handling systems which are manufactured before the date of publication of this document by CEN.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to machines for the production of paper and board, including head box, wire section (former), press section, drying section, film size press, coating unit, flotation and infrared dryer, smoothing unit, integrated calender, measuring device, reel-up, integrated sheeter, drives and control system (paper and board making machines) and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for the production of paper and board, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This document does not deal with pressure hazards in steam-heated drying cylinders.
NOTE   Directive 97/23/EC gives essential safety requirements for equipment under pressure.
This document does not apply to:
   tissue making machines,
   cardboard making machines,
   coating machines,
   machines for the production of corrugated board,
   integrated conveyors and cranes designed for transporting reels/shells (reel spools) and for machine maintenance, and
   integrated fire extinguishing equipment.
This European Standard is not applicable to paper and board making machines which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to low consistency refining plants, i.e. plants working with suspensions of fibres of virgin pulp, mechanical wood pulp or deinking pulp in water with a consistency up to approximately 6 %, used in the paper making process and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to refining plants, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This standard does not apply to beaters.
This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to coating machines applying the wet process for off-line coating of base paper including unwind unit, coating units, drying section, flotation and infrared dryer, smoothing unit, integrated calender, measuring device, reel-up, integrated sheeter, drives and control system and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to coating machines, when used as intended and under the conditions foreseen by the manufacturer. This document does not deal with pressure hazards in steam-heated drying cylinders. This document does not apply to: - paper and board making machines, - equipment for the treatment of coating substances, - coating machines using solvent-based colours, - coating machines applying silicon, adhesives or resin onto the paper web, - printing and varnishing machines, - integrated conveyors and cranes designed for transporting reels/shells (reel spools) and for machine maintenance, - integrated fire extinguishing equipment. This document is not applicable to coating machines which are manufactured before the date of publication as an EN.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to tissue making machines for the production of soft and crepe paper and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to tissue making machines when used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This document does not deal with pressure hazards in steam-heated drying cylinders and Yankee cylinders.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to roll handling systems for use in paper finishing and applies together with
EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazardous events relevant to roll handling systems, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document does not apply to:
-   machine reel handling systems;
-   stacker trucks, industrial trucks and driverless industrial trucks;
-   separate storage systems with cranes and high bay storage systems;
-   portable devices for moving rolls.
This document is not applicable to roll handling systems which are manufactured before the date of publication of this document by CEN.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to rereelers and winders and applies together with
EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for the production of paper and board, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This European Standard does not apply to machines used in paper converting.
This European Standard is not applicable to rereelers and winders which are manufactured before the date of publication as an EN.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to roll packaging machines for use in papermaking and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to roll packaging machines, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This document is not applicable to roll packaging machines which are manufactured before the date of publication as an EN.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to machines for the production of paper and board, including head box, wire section (former), press section, drying section, film size press, coating unit, flotation and infrared dryer, smoothing unit, integrated calender, measuring device, reel-up, integrated sheeter, drives and control system (paper and board making machines) and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for the production of paper and board, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This document does not deal with pressure hazards in steam-heated drying cylinders.
NOTE   Directive 97/23/EC give essential safety requirements for equipment under pressure.
This document does not apply to:
-   tissue making machines,
-   cardboard making machines,
-   coating machines,
-   machines for the production of corrugated board,
-   integrated conveyors and cranes designed for transporting reels/shells (reel spools) and for machine maintenance, and
-   integrated fire extinguishing equipment.
This European Standard is not applicable to paper and board making machines which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to low consistency refining plants, i.e. plants working with suspensions of fibres of virgin pulp, mechanical wood pulp or deinking pulp in water with a consistency up to approximately 6 %, used in the paper making process and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to refining plants, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This standard does not apply to beaters.
This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to rereelers and winders and applies together with  EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for the production of paper and board, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This European Standard does not apply to machines used in paper converting. This European Standard is not applicable to rereelers and winders which are manufactured before the date of publication as an EN.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1 This document applies to:
- printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and inks (before and after the printing process) as well as machinery for cleaning printing formes and checking the print quality (auxiliary printing machinery).
- paper converting machines, i. e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner.
NOTE Similar substrates are, for example, board, corrugated board, plastic film, aluminium foil, sheet metal and photographic paper.
1.2 This document deals with all common significant hazards relevant to printing and paper converting machinery when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.3 This document is not applicable to printing and paper converting machines which are manufactured before the date of publication of this document by CEN.
1.4 This document does not apply to:
- winder-slitters and sheeters in paper finishing (sheeters with unwinders) (see EN 1034-1:2000,
EN 1034-3:2000, EN 1034-5:2005);
- office-type collating machines equipped with friction feeders;
- mail processing machines;
- machines used for filling packages (such as machines for shaping, filling, and closing the package);
- textile printing presses.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This document applies to:
-   printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and inks (before and after the printing process) as well as machinery for cleaning printing formes and checking the print quality (auxiliary printing machinery).
-   paper converting machines, i. e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner.
NOTE   Similar substrates are, for example, board, corrugated board, plastic film, aluminium foil, sheet metal and photographic paper.
1.2   This document deals with all common significant hazards relevant to printing and paper converting machinery when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.3   This document is not applicable to printing and paper converting machines which are manufactured before the date of publication of this document by CEN.
1.4   This document does not apply to:
-   winder-slitters and sheeters in paper finishing (sheeters with unwinders) (see EN 1034-1:2000,
EN 1034-3:2000, EN 1034-5:2005);
-   office-type collating machines equipped with friction feeders;
-   mail processing machines;
-   machines used for filling packages (such as machines for shaping, filling, and closing the package);
-   textile printing presses.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of airborne noise emission from printing and paper converting machines covered by the EN 1010 series and from paper making and finishing machines covered by the EN 1034 series. It specifies noise measurement methods and installation and operating conditions to be used for the test.
This standard applies to those machines listed in the normative annexes A to J. The principles of this noise test code should be applied as far as possible also for the determination of noise emission of machines and machine parts not listed in the normative annexes A to J. In such cases, all information relating to assembly, installation and operating conditions as well as the arrangement of work stations should be recorded and reported in the test report.
Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. Declared noise emission values permit comparison of printing and paper machines on the market.
The use of this noise test code ensures the reproducibility of the determination of the characteristic noise emissions within specific limits. These limits are determined by the accuracy grade of the noise measuring method used. Noise measurements specified by this standard are carried out by the engineering method (accuracy grade 2) and the survey method (accuracy grade 3).

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): exposure equipment for the production of films and printing forms; equipment for developing films and printing forms; washing machines for printing forms; machines for bending printing forms; punching machines for film and printing forms; cutting machines for film and printing forms; machines for the production of gravure printing forms; scanners. Printing and varnishing machines: proofing presses; sheet-fed printing presses and varnishing machines including digital printing presses; web-fed rotary presses and varnishing machines including digital printing presses; screen printing presses.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to:
-   Pre-press machinery (machinery and devices for the production of master copies and printing forms):
-   exposure equipment for the production of films and printing forms;
-   equipment for developing films and printing forms;
-   washing machines for printing forms;
-   machines for bending printing forms;
-   punching machines for film and printing forms;
-   cutting machines for film and printing forms;
-   machines for the production of gravure printing forms;
-   scanners.
-   Printing and varnishing machines:
-   proofing presses;
-   sheet-fed printing presses and varnishing machines including digital printing presses;
-   web-fed rotary presses and varnishing machines including digital printing presses;
-   screen printing presses.
-   Auxiliary devices:
-   cylinder and roller washing devices;
-   continuous flow drying devices;
-   powder spraying devices;
-   auxiliary devices on inking and damping units;
-   automatic plate clamping devices;
-   washing equipment for printing forms, rollers and scrapers;
-   pile turners;
-   measuring and control devices.
This document shall be used together with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respecti¬ve requirements in this standard.
This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1.
This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates.
This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with EN 1034-1:2000+A1:2009. It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5.
It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls..
This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of airborne noise emission from printing and paper converting machines covered by the EN 1010 series and from paper making and finishing machines covered by the EN 1034 series. It specifies noise measurement methods and installation and operating conditions to be used for the test. This standard applies to those machines listed in the normative annexes A to J. The principles of this noise test code should be applied as far as possible also for the determination of noise emission of machines and machine parts not listed in the normative annexes A to J. In such cases, all information relating to assembly, installation and operating conditions as well as the arrangement of work stations should be recorded and reported in the test report. Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. Declared noise emission values permit comparison of printing and paper machines on the market. The use of this noise test code ensures the reproducibility of the determination of the characteristic noise emissions within specific limits. These limits are determined by the accuracy grade of the noise measuring method used. Noise measurements specified by this standard are carried out by the engineering method (accuracy grade 2) and the survey method (accuracy grade 3).

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control systems intended for use in debarking plants for paper making and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to barking drums, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to sawing equipment or log and bark conveying systems used in debarking plants. This European Standard is not applicable to barking drums that have been manufactured before the date of publication of this European Standard by CEN.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to sheeters, including unwinding units, sheet stacker, drive and control units intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2010". Paper dust and edge strip suction devices are not covered by this standard. It deals with all significant hazards, hazardous situations and hazard events relevant to sheeters, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to: - sheeters for corrugated board (see EN 1010-5); - sheeters for foil (see EN 1010-1); - sheeters with sheet feeders (see EN 1010-1); - guillotines (see EN 1010-3:2002). This document is not applicable to sheeters that have been manufactured before the date of publication of this document by CEN.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to reel splitters intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4). This European Standard applies only to reel splitters with a movable knife and of the following designs: - machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off; - machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other. This European Standard also applies to the integrated conveyor belts and the integrated pivoting platform. This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to machines for de-wiring bales and units and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazard events relevant to machines for de-wiring bales and units, when used as intended and under conditions reasonably foreseeable by the manufacturer as incorrect application (see clause 4).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to chests used in paper making and shall be applied together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to chests when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard does not apply to tanks for chemicals, storage tanks for starch and other additives used in paper making or basins or vessels for waste water resulting from the paper making process.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to wood grinders intended for the production of pulp used in paper making including sharpening devices and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to wood grinders when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to loading facilities. Hazards caused by overpressure are not covered by this standard.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to machines for de-wiring bales and units and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for de-wiring bales and units, when used as intended and under conditions reasonably foreseeable by the manufacturer as incorrect application (see clause 4).
This European Standard is not applicable to hand-held devices.
This European Standard is not applicable to machines for de-wiring bales and units which are manufactured before the date of publication of this document by CEN.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to reel splitters intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2009". It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4).
This European Standard applies only to reel splitters with a movable knife and of the following designs:
-   machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off;
-   machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other.
This European Standard also applies to the integrated conveyor belts and the integrated pivoting platform.
This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter.
NOTE   Pulpers are dealt with in EN 1034-4.
This European Standard is not applicable to reel splitters which are manufactured before the date of publication of this EN.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to sheeters, including unwinding units, sheet stacker, drive and control units intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2009". Paper dust and edge strip suction devices are not covered by this standard. It deals with all significant hazards, hazardous situations and hazard events relevant to sheeters, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to:
-   sheeters for corrugated board (see EN 1010-5);
-   sheeters for foil (see EN 1010-1);
-   sheeters with sheet feeders (see EN 1010-1);
-   guillotines (see EN 1010-3:2002).
This document is not applicable to sheeters that have been manufactured before the date of publication of this document by CEN.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control systems intended for use in debarking plants for paper making and shall be used together with !EN 1034-1:2000+A1:2009". It deals with all significant hazards, hazardous situations and hazard events relevant to barking drums, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to sawing equipment or log and bark conveying systems used in debarking plants.
This European Standard is not applicable to barking drums that have been manufactured before the date of publication of this European Standard by CEN.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to wood grinders intended for the production of pulp used in paper making including sharpening devices and shall be used together with EN 1034-1:2000+A1:2009. It deals with all significant hazards, hazardous situations and hazard events relevant to wood grinders when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to loading facilities. Hazards caused by overpressure are not covered by this standard.
Note: For hazards caused by overpressure, see the directive for pressure vessels.
This European Standard is not applicable to wood grinders manufactured before the date of publication of this European Standard by CEN.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard applies to chests used in paper making and shall be applied together with !EN 1034 1:2000+A1:2009". It deals with all significant hazards, hazardous situations and hazard events relevant to chests when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard does not apply to tanks for chemicals, storage tanks for starch and other additives used in paper making or basins or vessels for waste water resulting from the paper making process.
This European Standard does not apply to chests manufactured before the publication date of this European Standard.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard applies to cutting machines used in paper converting:
-   guillotines;
-    three-knife trimmers;
-    index cutting machines;
-   trimmers;
-   rotary cutters;
-   round cornering machines;
-   label punching machines.
This European Standard is only applicable in conjunction with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to the cutting machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements of this European Standard take precedence over respective requirements of !EN 1010-1:2004+A1".
This European Standard is not applicable to cutting machines manufactured before the publication of this European Standard by CEN.
1.2   This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN 1034-5).

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to
-   bookbinding machines:
-   stitching, riveting, eyeletting and attaching machines;
-   gang stitchers;
-   gathering machines;
-   perfect binders;
-   paper drills;
-   book signature presses;
-   book presses;
-   sheet folding machines;
-   book production lines for the production of books with hard covers;
-   back rounding and pressing machines;
-   backlining and head banding machines;
-   casing-in machines;
-   book cover crease forming machines.
-   paper converting machines:
-   machines for the production of envelopes;
-   machines for the production of sanitary items;
-   inserting machines;
-   counter-stackers;
-   paper embossing machines.
-   paper finishing machines:
-   coaters;
-   laminators.
This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to bookbinding, paper converting and paper finishing machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010 4 take precedence over respective requirements in EN 1010-1:2004+A1.
This document does not deal with risks generated by noise emitted from the machines. These issues are covered basically in EN 1010-1:2004+A1. However, for machines like sheet folding machines and machines for the production of envelopes and sanitary items, some specific proposals for noise reduction measures are given.
This document is not applicable to bookbinding, paper converting and finishing machines manufactured before the date of publication of this document by CEN.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to
-   bookbinding machines:
-   stitching, riveting, eyeletting and attaching machines;
-   gang stitchers;
-   gathering machines;
-   perfect binders;
-   paper drills;
-   book signature presses;
-   book presses;
-   sheet folding machines;
-   book production lines for the production of books with hard covers;
-   back rounding and pressing machines;
-   backlining and head banding machines;
-   casing-in machines;
-   book cover crease forming machines.
-   paper converting machines:
-   machines for the production of envelopes;
-   machines for the production of sanitary items;
-   inserting machines;
-   counter-stackers;
-   paper embossing machines.
-   paper finishing machines:
-   coaters;
-   laminators.
This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to bookbinding, paper converting and paper finishing machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010 4 take precedence over respective requirements in EN 1010-1:2004+A1.
This document does not deal with risks generated by noise emitted from the machines. These issues are covered basically in EN 1010-1:2004+A1. However, for machines like sheet folding machines and machines for the production of envelopes and sanitary items, some specific proposals for noise reduction measures are given.
This document is not applicable to bookbinding, paper converting and finishing machines manufactured before the date of publication of this document by CEN.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard applies to cutting machines used in paper converting:
-   guillotines;
-    three-knife trimmers;
-    index cutting machines;
-   trimmers;
-   rotary cutters;
-   round cornering machines;
-   label punching machines.
This European Standard is only applicable in conjunction with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to the cutting machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements of this European Standard take precedence over respective requirements of !EN 1010-1:2004+A1".
This European Standard is not applicable to cutting machines manufactured before the publication of this European Standard by CEN.
1.2   This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN 1034-5).

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard applies to machines for the production of corrugated board and the conversion of flat and
corrugated board:
. corrugated board production machines;
. folder gluer machines;
. printer slotters, rotary die cutters and combined machines (inline machines);
. hand-fed platen machines for cutting and creasing;
. automatic platen machines for cutting and creasing;
. tube winding machines.
This document shall be used together with EN 1010-1:2004. Both parts together identify all significant hazards
relevant to machines for the production of corrugated board and the conversion of flat and corrugated board
when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The
specific requirements in EN 1010-5 take precedence over respective requirements in EN 1010-1:2004.
This document does not deal with risks generated by noise emitted from the machines. These issues are
fundamentally covered in EN 1010-1:2004 However, this document specifies requirements for noise reduction
of corrugated board and flatbed punching machines.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard applies to machines for the production of corrugated board and the conversion of flat and
corrugated board:
. corrugated board production machines;
. folder gluer machines;
. printer slotters, rotary die cutters and combined machines (inline machines);
. hand-fed platen machines for cutting and creasing;
. automatic platen machines for cutting and creasing;
. tube winding machines.
This document shall be used together with EN 1010-1:2004. Both parts together identify all significant hazards
relevant to machines for the production of corrugated board and the conversion of flat and corrugated board
when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The
specific requirements in EN 1010-5 take precedence over respective requirements in EN 1010-1:2004.
This document does not deal with risks generated by noise emitted from the machines. These issues are
fundamentally covered in EN 1010-1:2004 However, this document specifies requirements for noise reduction
of corrugated board and flatbed punching machines.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 12643 provides safety requirements specific to binding and finishing equipment and systems. This part of ISO 12643 shall be used in conjunction with ISO 12643-1. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.
This part of ISO 12643 provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process.
It is applicable to a wide range of equipment used in the binding and finishing process.

  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard provides safety requirements for the design and construction of converting equipment used in the package printing, converting and graphic technology industries. It is applicable to converting equipment not covered by other parts of EN ISO 12643. It is intended to be used in conjunction with the general requirements given in EN ISO 12643-1.

  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard provides safety requirements specific to prepress and press equipment and systems. It is intended to be used in conjunction with the general requirements given in EN ISO 12643-1.
This standard provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system.

  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems and converting systems. It is applicable to equipment used in stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system.

  • Draft
    104 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard applies to machines for the production of corrugated board and the conversion of flat and corrugated board:
-   corrugated board production machines;
-   folder gluer machines;
-   printer slotters, rotary die cutters and combined machines (inline machines);
-   stand-alone platen presses, for single stroke mode, dwell mode and continuous operation mode, for cutting and creasing;
-   automatic flatbed punching machines;
-   tube winding machines.
This document shall be used together with EN 1010-1:2004+A1:2010. Both parts together identify all significant hazards relevant to machines for the production of corrugated board and the conversion of flat and corrugated board when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010-5 take precedence over respective requirements in EN 1010-1:2004+A1:2010.
This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1:2010. However, this document specifies requirements for noise reduction of corrugated board and flatbed punching machines.
This document is not applicable to machines for the production of corrugated board and machines for the conversion of flat and corrugated board which are manufactured before the date of publication of this document by CEN.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day