91.090 - External structures
ICS 91.090 Details
External structures
Au?enkonstruktionen
Structures exterieures
Konstrukcije zunaj stavb
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 91.090 - External structures
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electric drives for garage doors for residential
use that open and close in a vertical direction, the rated voltage of the drives being not more
than 250 V for single-phase appliances and 480 V for other appliances. It also covers the
hazards associated with the movement of these electrically driven garage doors.
NOTE 101 Examples of garage doors are shown in Figure 101.
NOTE 102 The drive can be supplied with a garage door.
NOTE 103 This standard also applies to entrapment protection devices for use with drives. It does not cover
hazards related to the mechanisms of the door itself.
As far as is practicable, this standard deals with the common hazards presented by
appliances that are encountered by all persons in and around the home. However, in general,
it does not take into account playing with the appliance by young children, but recognizes that
children may be in the vicinity of the garage door.
NOTE 104 Attention is drawn to the fact that in many countries additional requirements are specified by the
national authorities responsible for the protection of labour and similar authorities.
NOTE 105 This standard does not apply to drives
– for shutters, awnings, blinds and similar equipment (IEC 60335-2-97);
– for gates, doors and windows (IEC 60335-2-103);
– for commercial and industrial purposes;
– intended to be used in locations where special conditions prevail, such as the presence of a corrosive or
explosive atmosphere (dust, vapour or gas).
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances.
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances.
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
2018-12-06: BT decision D161/C048: BT agreed to remove link to Machinery Directive (2006/42/EC) and to proceed to finalization and publication
2017-11-21 - Negative assessment is received during CDV stage. Consultant assessment request is missing for FDIS.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements and test methods for the safety in use of power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers power operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the power operation of industrial, commercial and garage doors, and gates when they are used as intended and under conditions of misuse which are reasonably foreseeable as identified in Clause 4.
All lifetime phases of the machinery including transportation, assembly, dismantling, disabling and scrapping are considered by this standard.
This European Standard does not apply to
- lock gates and dock gates;
- doors on lifts;
- doors on vehicles;
- armoured doors;
- doors mainly for the retention of animals, unless they are at the site perimeter ;
- theatre textile curtains;
- horizontally moving power operated doors mainly intended for pedestrian use;
- doors outside the reach of people (such as crane gantry fences);
- railway barriers;
- barriers intended solely for use by pedestrians;
- barriers used solely for vehicles on motorways.
Whenever the term "door" is used in this document, it shall be deemed to cover the full scope of types and variances of doors, gates and barriers in the scope of this Standard.
This European Standard does not deal with any specific requirements on noise emitted from power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises as their noise emission is not considered to be a relevant hazard.
NOTE Noise emission of power operated doors is not a significant hazard for the users of these products. It is a comfort aspect.
This European Standard is not applicable to machinery which are manufactured before the date of publication of the standard.
- Standard68 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies mechanical requirements and test methods for manually operated doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers manually operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This document applies only to doors which are not part of the load carrying structure of the building.
It does not apply to:
— lock gates and dock gates;
— doors on vehicles;
— doors mainly for the retention of animals unless they are at the site perimeter;
— doors intended for pedestrian use;
— railway barriers.
Whenever the term “door” is used in this document, it is deemed to cover the full scope of types and variances of doors, gates and barriers defined by the scope of this European Standard.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60335-2-95:2019 is available as IEC 60335-2-95:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60335-2-95:2019 deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers the hazards associated with the movement of these electrically driven garage doors. The drive can be supplied with a garage door. This standard also applies to entrapment protection devices for use with drives. It does not cover hazards related to the mechanisms of the door itself. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account playing with the appliance by young children, but recognizes that children may be in the vicinity of the garage door. Attention is drawn to the fact that in many countries additional requirements are specified by the national authorities responsible for the protection of labour and similar authorities.
This standard does not apply to drives
- for shutters, awnings, blinds and similar equipment (IEC 60335-2-97);
- for gates, doors and windows (IEC 60335-2-103);
- for commercial and industrial purposes;
- intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
This fourth edition cancels and replaces the third edition published in 2011, Amendment 1: 2015 and Amendment 2:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the text has been aligned with edition 5.2 of Part 1;
b) reference to IEC 60335-2-97 and IEC 60335-2-103 has been revised to correctly state their titles (Clause 1);
c) specific instruction statements have been revised to separate them from information to be provided (7.12);
d) the compliance criteria for the tests of 19.11.2 and 19.11.3 has been modified (19.13);
e) the tests for class III appliances and parts of class III constructions have been modified (25.8, 25.15).
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard.
- Standard53 pagesEnglish and French languagesale 15% off
2018-12-06: BT decision D161/C048: BT agreed to remove link to Machinery Directive (2006/42/EC) and to proceed to finalization and publication
2017-11-21 - Negative assessment is received during CDV stage. Consultant assessment request is missing for FDIS.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General
This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
Fire resisting and/or smoke control characteristics for industrial, commercial, garage doors and gates are covered by EN 16034.
This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods.
These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard.
These devices can be manually or power operated.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000 6 3.
1.2 Exclusions
This European Standard does not apply to the following which are intended for a different use:
- lock gates and dock gates;
- doors on lifts;
- doors on vehicles;
- armoured doors;
- doors mainly for the retention of animals;
- theatre textile curtains;
- horizontally moving power operated doors mainly intended for pedestrian use in accordance with EN 16361;
- revolving doors of any size;
- railway barriers;
- barriers used solely for vehicles.
This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition.
This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs.
This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation.
The noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive.
1.3 Specific applications
This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door.
It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade.
When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard30 pagesGerman languagesale 10% offe-Library read for1 day
2015-01-29 GVN: UAP to adopt the published IEC/A1 (see procedures email in dataservice on 2015-01-29).
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60335-2-95:2011 deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers the hazards associated with the movement of these electrically driven garage doors. This standard also applies to entrapment protection devices for use with drives. It does not cover hazards related to the mechanisms of the door itself. This standard does not apply to drives: - for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97); - for garage doors for use by more than one household (IEC 60335-2-103); - for commercial and industrial purposes or - for drives intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-95 are as follows (minor changes are not listed): Some notes have been converted to normative text (11.7, 20.2, 20.101); A requirement to fit an entrapment protection device has been added (22.109). The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. This publication is to be read in conjunction with IEC 60335-1:2010.
- Standard37 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General
This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
Fire resisting and/or smoke control characteristics for industrial, commercial, garage doors and gates are covered by EN 16034.
This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods.
These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard.
These devices can be manually or power operated.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000 6 3.
1.2 Exclusions
This European Standard does not apply to the following which are intended for a different use:
- lock gates and dock gates;
- doors on lifts;
- doors on vehicles;
- armoured doors;
- doors mainly for the retention of animals;
- theatre textile curtains;
- horizontally moving power operated doors mainly intended for pedestrian use in accordance with EN 16361;
- revolving doors of any size;
- railway barriers;
- barriers used solely for vehicles.
This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition.
This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs.
This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation.
The noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive.
1.3 Specific applications
This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door.
It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade.
When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard30 pagesGerman languagesale 10% offe-Library read for1 day
2015-01-29 GVN: UAP to adopt the published IEC/A1 (see procedures email in dataservice on 2015-01-29).
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
EN-IEC 60335-2-95 deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers the hazards associated with the movement of these electrically driven garage doors. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account playing with the appliance by young children, but recognizes that children may be in the vicinity of the garage door.
- Standard37 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the mechanical properties, dimensions, coatings, test methodology and delivery conditions of welded mesh gabions products. The general meaning of welded mesh gabion is a metallic box made of welded wire mesh to be filled with stone or other suitable material. Only the characteristics of the metallic cage are subject of this document. Filling materials, e.g. coarse armourstone, are covered in other standards. This document covers gabions produced from welded wire fabric and accessories coated with a zinc coating, a hot-dip galvanization or a zinc-aluminium alloy, polyvinyl chloride (PVC) or stainless steel. Accessories include complementary materials such as spiral binders, rings, lacing wires, tie-rods or spacers.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the dimensions, coatings, test methodology and delivery conditions of steel wire mesh products having meshes of hexagonal shape specified for engineering purposes.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a method for calculating the thermal transmittance of industrial, commercial and garage doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with EN 13241-1. The calculation can include different types of glazing, frames with or without thermal breaks, and different types of opaque panels and thermal bridge effects at the edge of the panel or joint between the glazed area, the frame area and the panel area. This paper does not include the effects of solar radiation, heat transfer caused by air leakage, calculation of condensation, additional heat transfer at the corners and edges of the door connections to the main building structure, or thermal effects between the door and the main building structure.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for steel wire welded mesh panels for fencing. The panels are used for fencing parks, schools, sport stadia, public buildings, factories, airports, military sites, etc. This European Standard specifies the general characteristics of welded mesh supplied as panels and recommended coatings, properties and tolerances. This European Standard is applicable to panels made from round or shaped wires not thicker than 10 mm. The panels have round, rectangular or triangular vertical wires and single or double horizontal wires. The use of V-shaped vertical wires is optional.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies zinc coated and zinc alloy coated steel barbed wire, conventional and reverse twist consisting of two stranded line wires, around which the barbs are tightly wound, a twist being imparted between the barbs to restrict their movement. The barbed wire entanglement has a single line wire, around which the barbs are wound.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies preferred dimensions, properties and coatings of zinc and zinc alloy coated steel wire woven hinged joint and knotted mesh fencing.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This Part of this European Standard specifies dimensions, properties and coatings of steel wire chain link fencing.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft9 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for steel wire welded mesh fencing of which there are many types for a variety of applications. It specifies the general characteristics of welded mesh fencing supplied as rolls or panels and coatings, properties and tolerances. This European Standard covers only orthogonal welded mesh i.e. wire welded at right angles to one another. For welded mesh fencing made from panels the specification covers only panels made from wires not greater than 10 mm.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the dimensions and coating of steel wire netting having meshes of hexagonal shape specified for agricultural, insulation and fencing purposes.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard specifies precast products in reinforced or pre-stressed concrete with or without fibres, to be used together or in combination with other elements to erect fences e.g. boundary fences.
This European standard covers both mechanical resistance determined by calculation and load bearing capacity determined by testing.
Normal weight concrete or light weight concrete elements include posts, solid or open panels, slabs, rails, spurs, struts and base panels.
The intended uses may be nonstructural or lightly structural.
It provides for the evaluation of conformity of elements to this European Standard. Marking conditions are included.
- Standard52 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard specifies precast products in reinforced or prestressed concrete with or without fibres, to be used together or in combination with other elements to erect fences e.g. boundary fences.
This European standard covers both mechanical resistance determined by calculation and load bearing capacity determined by testing.
Normal weight concrete or light weight concrete elements include posts, solid or open panels, slabs, rails, spurs, struts and base panels.
The intended uses may be nonstructural or lightly structural.
It provides for the evaluation of conformity of elements to this European Standard. Marking conditions are included.
- Standard52 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60335-2-95:2011 deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers the hazards associated with the movement of these electrically driven garage doors. This standard also applies to entrapment protection devices for use with drives. It does not cover hazards related to the mechanisms of the door itself. This standard does not apply to drives:
- for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97);
- for garage doors for use by more than one household (IEC 60335-2-103);
- for commercial and industrial purposes or
- for drives intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-95 are as follows (minor changes are not listed): Some notes have been converted to normative text (11.7, 20.2, 20.101); A requirement to fit an entrapment protection device has been added (22.109). The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication.
This publication is to be read in conjunction with IEC 60335-1:2010.
- Standard93 pagesEnglish and French languagesale 15% off
1.1 General
This European Standard applies for design, construction and testing of sensitive protective devices where the device is used to detect pedestrians including in particular applications, slow moving elderly persons, slow moving disabled persons and children who may be exposed to injury by power operated doors, gates and barriers, electrically powered from a public supply and intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial, public or residential premises.
This standard also covers safety devices for commercial doors such as rolling shutters and rolling grilles when used as doors on retail premises which are mainly provided for the access of persons rather than vehicles or goods.
This standard deals with all significant hazards listed in annex A and specifies requirements to eliminate or minimise them.
This standard covers the requirements for electrical powered safety devices using mains supply provided for installation on or used in conjunction with powered doors in order to avoid hazardous situations which can be encountered when a door is used normally.
The sensitive protective device is designed to give a change in the output signal switching device which may be used to provide protection for the person being at risk. It applies to ready to use sensitive protective device and integrated sensitive protective device (mounted on or connected to a power operated door in normal use).
This standard only applies to door safety devices manufactured after the date of publication.
1.2 Exclusions
This European Standard does not apply to protective equipment for installation on doors which are intended for a different use than the one described above such as:
- lock gates and dock gates;
- doors on lifts;
- doors on vehicles;
- doors mainly for the retention of animals;
- theatre textile curtains;
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard33 pagesGerman languagesale 10% offe-Library read for1 day
This European Standard specifies the information to be provided by the door manufacturer and the components manufacturer to ensure safe installation, operation, use (including maintenance and repair) of doors, gates and barriers intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods. This European Standard applies to manually operated and power operated doors, to doors and components intended to be installed by "non professional installers" and may also apply to the installation and use of upgrading component(s). The European Standard only applies to the doors and components manufactured after the date of publication. This European Standard does not apply to doors that are intended for a different use than the one described in 1.1 such as: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - doors mainly for the retention of animals; - theatre textile curtains; - railway barriers; - barriers used solely for vehicles. This European Standard does not apply to machinery other than power operated doors. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-2 or for domestic garage doors those specified in EN 55014-2. This European Standard does not cover: - products to be used in potential explosive atmosphere or on armoured doors; - programmable devices (see IEC 61508 series); - shock resistance of component (example IK code). These exclusions are based on technology used at the publication time of this standard. When a door is part of the load carrying structure of the building, the load carrying function is not dealt with in this European Standard.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard16 pagesGerman languagesale 10% offe-Library read for1 day
- Standard – translation18 pagesSlovenian languagesale 10% offe-Library read for1 day
This document regards precast reinforced concrete garages produced as monolithic units or as kits of single sections with room dimensions in stationary factories. These garages are intended to be erected on foundations designed by others and complying with the behaviour of the precast units. They may be free-standing, or may have backfilling behind some of the walls (earthfilled), or earth covered or built over with a parking area for cars or a second storey of precast garages. This document also applies to supplementary units, kits for double space garages and multiple parking garages as well as for garage boxes for one-storey basement garages. It does not apply to elements incorporated as a structural part of an upper structure unless they are designed according to EN 13369.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 7900:2006 specifies the characteristics of zinc- and zinc-alloy-coated steel barbed wire, with conventional and reverse twist consisting of two stranded line wires, around which the barbs are tightly wound, a twist being imparted between the barbs to restrict their movement. The barbed-wire entanglement has a single line wire, around which the barbs are wound.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
This document regards precast reinforced concrete garages produced as monolithic units or as kits of single sections with room dimensions in stationary factories. These garages are intended to be erected on foundations designed by others and complying with the behaviour of the precast units. They may be free-standing, or may have backfilling behind some of the walls (earthfilled), or earth covered or built over with a parking area for cars or a second storey of precast garages. This document also applies to supplementary units, kits for double space garages and multiple parking garages as well as for garage boxes for one-storey basement garages. It does not apply to elements incorporated as a structural part of an upper structure unless they are designed according to EN 13369.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General This European Standard specifies the classification for resistance to water penetration for doors in a closed position, when tested in accordance with EN 12489. The doors are intended for installation in areas in the reach of people, for which the main in-tended
uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.
- Standard4 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General This European Standard specifies the test method for determining the resistance to water penetration for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commer-cial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13 241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size;
- doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General This European Standard specifies the classification for air permeability for doors in a closed position, when tested in accordance with EN 12427. The doors are intended for installation in areas in the reach of people, for which the main in-tended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.
- Standard4 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General This European Standard specifies the test method and / or calculation of resistance to wind load for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main in-tended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13 241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - door mainly for the retention of animals; - theatre textile curtains;
- horizontally moving doors less than 2,5 m wide and 6,25 m 2 area, designed principally for pedestrian use; - revolving doors of any size;
- doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard14 pagesGerman languagesale 10% offe-Library read for1 day
1.1 General This European Standard specifies a test method for determining the air permeability for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main in-tended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13 241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts;
- doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General This European Standard specifies the classification for wind load for doors in a closed posi-tion. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commer-cial or residential premises.The doors may be manually or power operated. NOTE In case of wind load it is not necessary that the door can be opened or closed. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for
pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.
- Standard5 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard4 pagesGerman languagesale 10% offe-Library read for1 day
This standard specifies the terms for parts of most types of doors, gates and barriers in common use. The terms used are therefore also applicable for barriers.
- Standard13 pagesEnglish or French or German languagesale 10% offe-Library read for1 day
This European Standard specifies the terminology for doors, gates and barriers, intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods and vehicles accompanied by persons in industrial and commercial premises and in residential garages. This standard specifies with the help of sketches most types of doors, gates and barriers in common use, irrespective of the material used. Doors for the passage of persons only are covered by prEN 12650-1 and prEN 12519.
- Standard13 pagesEnglish, French and German languagesale 10% offe-Library read for1 day
This European Standard specifies the performance requirements for doors, gates and barriers, intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods and vehicles accompagnied by persons in industrial and commercial premises and in residential garages. The devices may be manually or power operated. Note: Power operated doors may be supplied either as an original power operated door or by the retrospective addition of a drive unit to a previously manually operated door.
- Draft35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard deals with all significant hazards, hazardous situations and events relevant to the power operation of industrial, commercial and garage doors, and gates when they are used as intended and under conditions of misuse which are reasonably foreseeable as identified in Clause 4.
All lifetime phases of the machinery including transportation, assembly, dismantling, disabling and scrapping are considered by this standard.
This standard does not deal with sensitive protective equipment using ultrasonic, radar, capacitive,inductive, passive infra-red and vision based technologies. For these types of equipment this standard can be used as a guide.
- Draft29 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General
This document specifies the safety and performance requirements for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This document also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods.
These doors can include manual pedestrian pass doors incorporated in the door leaf which are also covered by this document.
These devices can be manually or power operated.
1.2 Exclusions
This document does not apply to:
- lock gates and dock gates;
- doors on lifts;
- doors on vehicles;
- armoured doors;
- doors mainly for the retention of animals, unless they are at the site perimeter;
- theatre textile curtains;
- horizontally moving power operated doors mainly intended for pedestrian use;
- doors outside the reach of people (such as crane gantry fences);
- railway barriers;
- barriers intended solely for use by pedestrians;
- barriers used solely for vehicles on motorways.
- Draft35 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for determining the air permeability for industrial, commercial and garage doors and gates according prEN 13241:2020 in a closed position.
For the purposes of this document the term ‘door’ is used as a general term for ‘industrial, commercial and garage doors and gates’ unless clearly stated.
- Draft9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the test method and/or calculation of resistance to wind load for industrial, commercial and garage doors and gates according prEN 13241:2020 in a closed position.
For the purposes of this document the term ‘door’ is used as a general term for ‘industrial, commercial and garage doors and gates’ unless clearly stated.
- Draft16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the test method for determining the resistance to water penetration for industrial, commercial and garage doors and gates according prEN 13241:2020 in a closed position.
For the purposes of this document the term ‘door’ is used as a general term for ‘industrial, commercial and garage doors and gates’ unless clearly stated.
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies mechanical requirements and test methods for manually operated doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers manually operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This document applies only to doors which are not part of the load carrying structure of the building.
It does not apply to
- lock gates and dock gates;
- doors on vehicles;
- doors mainly for the retention of animals unless they are at the site perimeter;
- doors intended for pedestrian use;
- railway barriers.
Whenever the term "door" is used in this document, it is deemed to cover the full scope of types and variances of doors, gates and barriers defined by the scope of this Standard.
- Draft6 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements and test methods for the safety in use of power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers power operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the power operation of industrial, commercial and garage doors, and gates when they are used as intended and under conditions of misuse which are reasonably foreseeable as identified in Clause 4.
All lifetime phases of the machinery including transportation, assembly, dismantling, disabling and scrapping are considered by this standard.
This European Standard does not apply to
- lock gates and dock gates;
- doors on lifts;
- doors on vehicles;
- armoured doors;
- doors mainly for the retention of animals, unless they are at the site perimeter ;
- theatre textile curtains;
- horizontally moving power operated doors mainly intended for pedestrian use;
- doors outside the reach of people (such as crane gantry fences);
- railway barriers;
- barriers intended solely for use by pedestrians;
- barriers used solely for vehicles on motorways.
Whenever the term "door" is used in this document, it shall be deemed to cover the full scope of types and variances of doors, gates and barriers in the scope of this Standard.
This European Standard does not deal with any specific requirements on noise emitted from power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises as their noise emission is not considered to be a relevant hazard.
NOTE Noise emission of power operated doors is not a significant hazard for the users of these products. It is a comfort aspect.
This European Standard is not applicable to machinery which are manufactured before the date of publication of the standard.
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements and test methods for sensitive protective equipment to be used with power operated industrial/commercial/garage doors, gates and barriers covered by EN 12453 and power operated pedestrian doors covered by EN 16005.
NOTE "safety protective equipment" means a device:
- which serves to fulfil a safety function,
- which is independently placed on the market,
- the failure and/or malfunction of which endangers the safety of persons, and
- which is not necessary in order for the machinery to function, or for which normal components may be substituted in order for the machinery to function.
Whenever the term "door" is used in this document, it need to be deemed to cover the full scope of types and variances of doors, gates and barriers defined by the scope of EN 12453 and EN 16005.
This standard does not deal with sensitive protective equipment using ultrasonic, radar, capacitive, inductive or active infrared technologies.
This standard does not apply to inherent sensitive protective equipment.
- Draft25 pagesEnglish languagesale 10% offe-Library read for1 day
1.1 General
This European Standard specifies the safety and performance requirements for doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods.
These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard.
These devices can be manually or power operated.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-3.
1.2 Exclusions
This European Standard does not apply to the following which are intended for a different use:
- lock gates and dock gates;
- doors on lifts;
- doors on vehicles;
- armoured doors;
- doors mainly for the retention of animals;
- theatre textile curtains;
- horizontally moving manually operated pedestrian doors with a leaf size less than 6,25 m²;
- horizontally moving power operated doors less than 2,5 m wide and 6,25 m² area, designed principally for pedestrian use in accordance with prEN 12650-1;
- revolving doors of any size;
- railway barriers;
- barriers used solely for vehicles.
This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition.
This European Standard does not contain any specific requirements for fire resistance or smoke control characteristics which are covered in prEN 13241-2.
(....)
- Draft6 pagesEnglish languagesale 10% offe-Library read for1 day