97.220.40 - Outdoor and water sports equipment
ICS 97.220.40 Details
Outdoor and water sports equipment
Freiluftgerate. Wassersportgerate
Équipements de sports de plein air et aquatiques
Oprema za športe na prostem in vodne športe
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 97.220.40 - Outdoor and water sports equipment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This European Standard specifies requirement for protective helmets that may or may not have a peak, for people involved in equestrian activities. It gives safety requirements that include methods of test and levels of performance for shock absorption, for resistance to penetration and for the strength and effectiveness of the retention system and the deflection of a peak if fitted.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft25 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and test methods for ice-tools for use in mountaineering including climbing, and as a buried anchor for protection against falls.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and test methods for dynamic ropes (single, half and twin ropes) in kernmantel construction for use in mountaineering including climbing.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and test methods for accessory cords, supplied on a drum or in separate lengths, for use in mountaineering including climbing.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and test methods for dynamic ropes (single, half and twin ropes) in kernmantel construction for use in mountaineering including climbing.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and test methods for accessory cords, supplied on a drum or in separate lengths, for use in mountaineering including climbing.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and test methods for ice-tools for use in mountaineering including climbing, and as a buried anchor for protection against falls.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety and performance requirements for the design, assembly, and testing of bicycles and sub-assemblies, and lays down guidelines for manufacturer’s instructions on the use and care of such bicycles.
This document applies to young adult bicycles with maximum saddle height of 635 mm or more and less than 750 mm, city and trekking bicycles, mountain bicycles, and racing bicycles that have a maximum saddle height of 635 mm or more including folding bicycles.
This document does not apply to specialized types of bicycle, such as delivery bicycles, recumbent bicycles, tandems, BMX bicycles, and bicycles designed and equipped for use in severe applications such as sanctioned competition events, stunting, or aerobatic manoeuvres.
NOTE For bicycles with a maximum saddle height of 435 mm or less, see national regulations for ride-on toys, and with a maximum saddle height of more than 435 mm and less than 635 mm, see ISO 8098.
- Standard43 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft39 pagesEnglish languagesale 10% offe-Library read for1 day
2020-08-31 - Awaiting resolution of technical issues with TC.
- Standard51 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard is applicable to emergency parachutes deployed by the action of the pilot without any other assistance (mechanical or pyrotechnic), intended for use with single seater or two seater paragliders.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and test methods for lanyards intended to be the primary connection between the climber and the belay stance with the ability to withstand a dynamic impact. Lanyards intended only for positioning (e.g. daisy chain) or energy absorption in via ferrata or lanyards for rope courses are not covered by this document.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety and in water performance requirements for construction, sizing, marking and information supplied by the manufacturer for swimming aids intended to ensure a degree of buoyancy to assist beginners with movement through the water while learning to swim or while learning part of a swimming stroke. It also gives methods of test for verification of these requirements.
This document applies only to swimming devices that are designed to be worn, to be securely attached to the body and which have either inherent buoyancy or can be inflated. It only applies to class B swimming devices intended to introduce the user to the range of swimming strokes.
It does not apply to class A or class C swimming devices, to pull buoys, swim rings, lifebuoys, buoyancy aids, lifejackets or aquatic toys.
This document is not applicable for products known as 'baby neck rings' aiming to keep the user's airways above the water level.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety and in water performance requirements for construction, sizing, marking and information supplied by the manufacturer for swimming aids intended to ensure a degree of buoyancy to assist beginners with movement through the water while learning to swim or while learning part of a swimming stroke. It also gives methods of test for verification of these requirements.
This document applies only to swimming devices that are designed to be worn, to be securely attached to the body and which have either inherent buoyancy or can be inflated. It only applies to class B swimming devices intended to introduce the user to the range of swimming strokes.
It does not apply to class A or class C swimming devices, to pull buoys, swim rings, lifebuoys, buoyancy aids, lifejackets or aquatic toys.
This document is not applicable for products known as 'baby neck rings' aiming to keep the user's airways above the water level.
- Standard62 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft40 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements for construction, performance, sizing and marking for swimming devices intended to assist users with movement through the water in the early stages of water awareness, while learning to swim or while learning part of a swimming stroke. It also gives methods of test for verification of these requirements.
This part 2 of EN 13138 applies only to class C swimming devices that are designed to be held in the hands or by the body. Typical swimming devices include kick boards and pull/kick boards. These swimming devices are used to assist in learning to swim or to assist with swimming strokes and improving specific elements of the stroke, which have either inherent buoyancy or can be inflated.
It does not apply to pull buoys, swim rings, lifebuoys, buoyancy aids, lifejackets or aquatic toys.
- Standard27 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft26 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements for design, sizing, materials, strength and in-water performance as well as provisions for marking and the information supplied by the manufacturer for swim seats. It also specifies the relevant test methods. This document is not applicable to products covered by EN 13138 1 and EN 13138 2.
This document applies only to swimming devices into which the user is placed and which have either inherent buoyancy or can be inflated or a combination of both. It only applies to class A swimming devices intended to introduce the user to the water environment. These swimming devices are only intended for children aged up to 36 months with a body mass less than or equal to 19 kg. It does not apply to class B or class C swimming devices, to pull buoys, lifebuoys, buoyancy aids, lifejackets or aquatic toys.
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft53 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety and in water performance requirements for construction, sizing, marking and information supplied by the manufacturer for swimming aids intended to ensure a degree of buoyancy to assist beginners with movement through the water while learning to swim or while learning part of a swimming stroke. It also gives methods of test for verification of these requirements.
This document applies only to swimming devices that are designed to be worn, to be securely attached to the body and which have either inherent buoyancy or can be inflated. It only applies to class B swimming devices intended to introduce the user to the range of swimming strokes.
It does not apply to class A or class C swimming devices, to pull buoys, swim rings, lifebuoys, buoyancy aids, lifejackets or aquatic toys.
This document is not applicable for products known as 'baby neck rings' aiming to keep the user's airways above the water level.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for classifying the flight safety characteristics of
paragliders in terms of the demands on pilot flying skills.
This document is intended for the use of independent testing laboratories qualified for flight testing
paragliders.
- Standard51 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard is applicable to emergency parachutes deployed by the action of the pilot without any other assistance (mechanical or pyrotechnic), intended for use with single seater or two seater paragliders.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This standard applies to lanyards intended to be the primary connection between the climber and the belay
stance.
NOTE: lanyards intended only for positioning are not covered by this standard (e.g. daisy chain).
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard applies to all eye protectors intended for eye protection against hazards during the
sports of Squash, Racquetball and Squash 57 and sports with similar hazards and no greater risks.
It deals with materials, construction, optical properties, testing, labelling and marking.
It applies to eye protectors that incorporate prescription lenses, but not to eye protectors designed for use
over spectacles.
Requirements for the marking of eye protectors and for information to be supplied by the manufacturer are
also specified.
Information on the selection and use of eye protectors for Squash, Racquetball and Squash 57 is given in
Annex A.
This International Standard does not apply to:
a. sports eye protectors designed for use over prescription spectacles;
b. eye protectors for occupational applications;
c. eye protectors without lenses;
d. eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks
than Squash, Racquetball and Squash 57.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft25 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements for construction, performance, sizing, marking and information supplied by the manufacturer for swimming aids intended to assist beginners with movement through the water while learning to swim or while learning part of a swimming stroke. It also gives methods of test for verification of these requirements.
This part 1 of prEN 13138 applies only to devices that are designed to be worn, to be securely attached to the body and which have either inherent buoyancy or can be inflated. It only applies to Class B devices intended to introduce the user to the range of swimming strokes. It does not apply to Class A or Class C devices, to pull buoys, swim rings, lifebuoys, buoyancy aids, lifejackets or aquatic toys.
This document (prEN13138-1:2018) applies only in connection with prEN 13138-4:2018.
- Standard62 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft40 pagesEnglish languagesale 10% offe-Library read for1 day
This part 3 of EN 13138 specifies safety requirements for design, sizing, materials, strength and in-water performance as well as provisions for marking and the information supplied by the manufacturer for swim seats. It also specifies the relevant test methods. This standard is not applicable to products covered by EN 13138 1 and 2.
This part 3 of EN 13138 applies only to devices into which the user is placed and which have either inherent buoyancy or can be inflated or a combination of both. It only applies to class A devices intended to introduce the user to the water environment. These devices are only intended for children aged up to 36 months with a body mass less than or equal to 18 kg. It does not apply to class B or class C devices, to pull buoys, lifebuoys, buoyancy aids, lifejackets or aquatic toys.
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft53 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements for construction, performance, sizing and marking for swimming devices intended to assist users with movement through the water in the early stages of water awareness, while learning to swim or while learning part of a swimming stroke. It also gives methods of test for verification of these requirements.
This part 2 of EN 13138 applies only to class C devices that are designed to be held in the hands or by the body. Typical devices include kick boards and pull/kick boards. These devices are used to assist in learning to swim or to assist with swimming strokes and improving specific elements of the stroke, which have either inherent buoyancy or can be inflated.
It does not apply to pull buoys, swim rings, lifebuoys, buoyancy aids, lifejackets or aquatic toys.
- Standard27 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft26 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to all eye protectors intended for eye protection against hazards during playing or instructing in the sports of squash, racquetball and squash 57 and sports with similar hazards and no greater risks. It applies to eye protectors that incorporate prescription lenses but has no specific tests for eye protectors designed for use over spectacles.
It specifies requirements and testing for materials, performance, marking of eye protectors and information to be supplied by the manufacturer.
Information on the selection and use of eye protectors for squash, racquetball and squash 57 is given in Annex A.
This document does not apply to
a) sports eye protectors designed for use over prescription spectacles,
b) eye protectors for other occupational applications,
c) eye protectors without lenses,
d) eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks than squash, racquetball and squash 57, and
e) eye protectors with gradient-tinted lenses because they are not appropriate for squash, racquetball or squash 57.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft25 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to all eye protectors intended for eye protection against hazards during playing or instructing in the sports of squash, racquetball and squash 57 and sports with similar hazards and no greater risks. It applies to eye protectors that incorporate prescription lenses but has no specific tests for eye protectors designed for use over spectacles. It specifies requirements and testing for materials, performance, marking of eye protectors and information to be supplied by the manufacturer. Information on the selection and use of eye protectors for squash, racquetball and squash 57 is given in Annex A. This document does not apply to a) sports eye protectors designed for use over prescription spectacles, b) eye protectors for other occupational applications, c) eye protectors without lenses, d) eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks than squash, racquetball and squash 57, and e) eye protectors with gradient-tinted lenses because they are not appropriate for squash, racquetball or squash 57.
- Standard19 pagesEnglish languagesale 15% off
- Standard22 pagesFrench languagesale 15% off
- Draft21 pagesEnglish languagesale 15% off
- Draft22 pagesEnglish languagesale 15% off
- Draft24 pagesFrench languagesale 15% off
- Draft24 pagesFrench languagesale 15% off
This European Standard is applicable only to harnesses for paragliders. The intermediate attachment system between the harness and the paraglider does not form part of this standard.
This Standard specifies safety requirements and test methods.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for eyewear intended for surface swimming only. It contains requirements for eyewear for both recreational and specialist competitive swimming. It deals with materials, construction, optical properties and test methods. Requirements for the labelling and marking of swimming eyewear and for information to be supplied by the manufacturer are also specified. Eyewear intended for surface swimming conforming to the requirements of this standard are suitable for surface use and shallow diving only, e.g. from the edge of a pool, and are not suitable for wear when diving from a high board. This document applies to eyewear that include a) non-prescription nominally plano or afocal lenses, b) non-prescription mass-produced corrective lenses, and c) prescription lenses.
- Standard24 pagesEnglish languagesale 15% off
- Standard25 pagesFrench languagesale 15% off
- Draft24 pagesEnglish languagesale 15% off
- Draft26 pagesFrench languagesale 15% off
This document specifies safety requirements, test methods and operational requirements for water play equipment, features and structures:
- intended for playing, and
- in areas intended for water activities for public use (non-domestic), typically in swimming pool facilities, and
- where water is an integral part in the use of the play equipment/feature/structures.
This document also applies for spray parks.
This document does not apply to:
a) floating leisure articles according to EN ISO 25649 series;
b) artificial climbing walls according to EN 12572 series;
c) toys according to EN 71 series;
d) water slides according to EN 1069 series;
e) climbing/bouldering walls used in the swimming pool surround according to EN 17164;
f) water equipment/features (e.g. ornamental fountains) not intended for playing;
g) water play equipment/features installed in swimming pools for domestic use.
h) playground equipment according to EN 1176 series.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and test methods for components of an individual safety system for protection against a fall from height used in permanent and mobile rope courses as defined in EN 15567 1.
The products considered in this standard are not intended to limit, by themselves, the deceleration of the fall of the user, as defined in EN 15567 1. For this requirement, it is essential to consider the whole ropes course system.
Safety lines and harness are not covered in this standard.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the minimum safety requirement and test methods for a release system that reduces the pulling force of the kite and disconnects the user from the kite.
This document is applicable for release systems which are operated intentionally by the user or another person, and are used for the sport of kite boarding.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft22 pagesEnglish languagesale 10% offe-Library read for1 day
EN 1651+A1 is applicable only to harnesses for paragliders. The intermediate attachment system between the harness and the paraglider does not form part of this standard.This Standard specifies safety requirements and test methods.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies the minimum safety requirement and test methods for the safety release system that reduces the pulling force in the kite and disconnects the user from the kite.
This International Standard is applicable for safety release systems which are operated intentionally by the user or another person and are used for the sport of kite boarding.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft22 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies safety requirements, test methods and operational requirements for non-floating water play equipment, features and structures in areas intended for water activities for public use (non-domestic). Water is an integral part in the use of the play equipment/feature/structures covered in this standard.
The purpose of this standard is to ensure a proper level of safety when playing in, on or around water play equipment/feature(s), and at the same time to promote activities and features known to benefit children because they provide valuable experiences that will enable them to cope with situations outside the water play equipment/feature(s).
This standard also applies for spray parks.
The following are excluded:
a) floating leisure articles according to EN ISO 25649;
b) artificial climbing walls according to EN 12572;
c) toys according to EN 71;
d) Water slides according to EN 1069;
e) climbing walls used in the swimming pool surround according to prEN 17164.
f) Water equipment/features (e.g. fountains) not intended for playing.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and test methods for components of individual safety system for protection against fall from height used in permanent and mobile rope courses as defined in EN 15567 1.
The products considered in this standard are not intended to limit by themselves the deceleration of the fall of the user as defined in EN 15567 1, for that the whole ropes course system will be considered.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and test methods for crampons intended to prevent the user from slipping when used in mountaineering on snow and ice including climbing mixed terrain.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard is applicable to playing field goals used for competition, training or recreational play, indoor and outdoor areas including educational establishments and public recreational areas.
It specifies the functional and safety requirements and test methods for all types of portable and permanent socketed goals having a total weight greater than 10 kg with the exception of goals with a size of 5,00 m × 2,00 m and 7,32 m × 2,44 m with a weight of > 42 kg, which are covered by EN 748 (see Table 1, Footnote b and c).
The following goals specified in the standards listed below are also excluded:
a) EN 748 (football);
b) EN 749 (handball);
c) EN 750 (hockey);
d) EN 1270 (basketball) and any other type of goal used for basketball;
e) EN 15312 (free access multi-sports);
f) EN 13451 7 (water polo);
g) EN 16664 (lightweight goals).
The following goals are also excluded:
h) inflatable goals;
i) goals which are classified as toys under the responsibility of CEN/TC 52;
j) for portable and permanent socketed playing field goals for American football;
k) goals which are intended to move in use (e.g. Lacrosse, rink hockey and roller hockey).
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the minimum safety requirement and test methods for a release system that reduces the pulling force of the kite and disconnects the user from the kite. This document is applicable for release systems which are operated intentionally by the user or another person, and are used for the sport of kite boarding.
- Standard16 pagesEnglish languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
This document applies to kick scooters that can only be propelled by the muscular activity of a user with a body mass of more than 20 kg and less than 100 kg.
To reduce the risk of injuries to both the user and third parties during intended use this standard specifies safety requirements, test methods, marking, and information supplied by the manufacturer. Kick scooters for use by users of less than 20 kg do not belong to the scope of this document. They are toys.
It should be noted that there are two types of scooters for the weight group 20 kg to 50 kg – those classified as sports equipment for use on public roads and path ways (this European Standard) and those classified as toys for domestic use (according to EN 71-1).
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft21 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard is applicable to all water slides installed in swimming pools of public use.
This Standard specifies general safety requirements for water slides in swimming pools of public use and specific requirements for defined types of water slides. These specific safety requirements are also applicable to undefined types as far as possible.
These requirements concern safety and the technical rules for design, calculation and testing.
- Standard56 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and test methods for crampons intended to prevent the user from slipping when used in mountaineering on snow and ice including climbing mixed terrain.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to kick scooters which can only be propelled by the muscular activity of a user with a body mass of more than 20 kg and less than 100 kg.
It specifies safety requirements, test methods, marking and information supplied by the manufacturer to reduce the risk of injuries to both third parties and the user during intended use.
Kick scooters for use by users of less than 20 kg do not belong to the scope of this document. They are toys.
It should be noted that there are two types of scooters for the weight group 20 kg to 50 kg – those classified as sports equipment for use on public roads and path ways (this European Standard) and those classified as toys for domestic use (according to EN 71 1).
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft21 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard is applicable to playing field goals used for competition, training or recreational play, indoor and outdoor areas including educational establishments and public recreational areas.
It specifies the functional and safety requirements and test methods for all types of portable and permanent socketed goals having a total weight greater than 10 kg with the exception of goals with a size of 5,00 m × 2,00 m and 7,32 m × 2,44 m with a weight of > 42 kg, which are covered by EN 748 (see Table 1, Footnote b and c).
The following goals specified in the standards listed below are also excluded:
a) EN 748 (football);
b) EN 749 (handball);
c) EN 750 (hockey);
d) EN 1270 (basketball) and any other type of goal used for basketball;
e) EN 15312 (free access multi-sports);
f) EN 13451 7 (water polo);
g) EN 16664 (lightweight goals).
The following goals are also excluded:
h) inflatable goals;
i) goals which are classified as toys under the responsibility of CEN/TC 52;
j) for portable and permanent socketed playing field goals for American football;
k) goals which are intended to move in use (e.g. Lacrosse, rink hockey and roller hockey).
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard is applicable to all water slides installed in swimming pools of public use.
This Standard specifies general safety requirements for water slides in swimming pools of public use and specific requirements for defined types of water slides. These specific safety requirements are also applicable to undefined types as far as possible.
These requirements concern safety and the technical rules for design, calculation and testing.
- Standard56 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies safety requirements and test methods for rock anchors for use in mountaineering including climbing.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and test methods for harnesses for use in mountaineering including climbing. It is applicable to full body harnesses, small body harnesses, sit harnesses and chest harnesses.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and test methods for rock anchors for use in
mountaineering including climbing.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and test methods for harnesses for use in mountaineering including climbing. It is applicable to full body harnesses, small body harnesses, sit harnesses and chest harnesses.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for divers' watches and for saturation divers' watches for use in deep diving (see Annex A which deals with watches for saturation diving). It applies to divers' watches designed to withstand diving in water at depths of at least 100 m and equipped with a secured measuring system to indicate the diving time, which is visible in darkness. Moreover, it indicates the marking which the manufacturer is authorized to apply to them.
- Standard12 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document specifies the functional requirements for 4 types and 2 sizes (see Clause 3) and the safety requirements (see Clause 4) for football goals.
It is applicable to football goals for training and competition in outdoor sports facilities and indoor arenas.
The following football goals are excluded:
a) EN 16579: goals with a size of 5,00 m × 2,00 m and 7,32 m × 2,44 m and with a total weight of ≥ 10 kg and ≤ 42 kg (total weight includes net, net fixing and any permanently attached anchoring or stabilizing system);
b) EN 16664: (lightweight goals).
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the construction and performance requirements (including thermal) of wet suits for wear by divers for underwater activities where the user is breathing underwater. Marking, labelling, information meant to be provided at the point of sale, and instructions for use are also specified.
Laboratory and practical performance tests are specified.
Short sleeve jackets, short-leg trousers, under- and overgarments, and separate accessories such as gloves, hoods and boots are not within the scope of this document.
NOTE Suits and shorties for snorkelling including underwater activities are not covered by this standard.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day