ISO 4709 gives a classification system for composition cork intended to be used as gaskets in the mechanical industry. It provides a means for specifying or describing the relevant properties. Since not all properties that contribute to gasket performance are included, the use of this system is limited to the selection of materials in accordance with specified requirements.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off

ISO 4708:2017 specifies test methods to determine the characteristics of agglomerated composition cork and rubbercork to be used as gaskets in the mechanical industry. The following characteristics are considered: - thickness, - apparent density, - tensile strength, - compressibility and recovery, - flexibility, - resistance to boiling water, - behaviour in fluids.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

This European Standard gives details of a test procedure for packings to be used to seal the stuffing boxes of centrifugal pumps. It gives provisions on the design of test equipment, standard test parameters and reporting criteria. It does not specify performance criteria which should be agreed between supplier and customer, but does define 3 tightness classes.
When necessary, this European Standard is also applicable to packings used on other rotary equipment such as mixers and agitators.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document gives details of a test procedure for packings to be used to seal the stuffing boxes of centrifugal pumps. It gives provisions on the design of test equipment, standard test parameters and reporting criteria. It does not specify performance criteria which should be agreed between supplier and customer, but does define 3 tightness classes.
When necessary, this document is also applicable to packings used on other rotary equipment such as mixers and agitators.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 21049:2004 specifies requirements and gives recommendations for sealing systems for centrifugal and rotary pumps used in the petroleum, natural gas and chemical industries. It is applicable mainly for hazardous, flammable and/or toxic services where a greater degree of reliability is required for the improvement of equipment availability and the reduction of both emissions to the atmosphere and life-cycle sealing costs. It covers seals for pump shaft diameters from 20 mm (0,75 in) to 110 mm (4,3 in).
ISO 21049:2004 is also applicable to seal spare parts and can be referred to for the upgrading of existing equipment. A classification system for the seal configurations covered by ISO 21049:2004 into categories, types, arrangements and orientations is provided.

  • Standard
    197 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 21049:2004 specifies requirements and gives recommendations for sealing systems for centrifugal and rotary pumps used in the petroleum, natural gas and chemical industries. It is applicable mainly for hazardous, flammable and/or toxic services where a greater degree of reliability is required for the improvement of equipment availability and the reduction of both emissions to the atmosphere and life-cycle sealing costs. It covers seals for pump shaft diameters from 20 mm (0,75 in) to 110 mm (4,3 in).
ISO 21049:2004 is also applicable to seal spare parts and can be referred to for the upgrading of existing equipment. A classification system for the seal configurations covered by ISO 21049:2004 into categories, types, arrangements and orientations is provided.

  • Standard
    197 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the principal dimensions for the internal installation of single and multiple mechanical seals with (rotating) spring units into the pump sealing cavity according to ISO 3069 as minimum cavity dimensions as typical for centrifugal pumps in accordance with EN 22858 and EN 733. It also gives the seal designations and material codes to be used.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the principal dimensions for the internal installation of single and multiple mechanical seals with (rotating) spring units into the pump sealing cavity according to ISO 3069 as minimum cavity dimensions as typical for centrifugal pumps in accordance with EN 22858 and EN 733. It also gives the seal designations and material codes to be used.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies performance criteria for shaft seals in equipment used in biotechnological processes with respect to the potential risks of microorganisms in use for the worker or the environment.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This method indicates only essential features ans should be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. The degree of simplification depends on the kind of object represented, the scale of the drawing and the purpose of documentation. ISO 9222-2 deals with the detailed simplified representation.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

In contrast to the general simplified representation of part 1, this method shows more details of a seal, for example the configuration of lips. It should also be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. Elements and examples of this representation mode are given in tables and figures.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and test methods for non-hardening sealing materials (hereafter referred to as jointing compounds) suitable for sealing threaded metallic joints such as those specified in ISO 7-1. These jointing compounds are for use in contact with 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG) not including LPG in the liquid form) and hot water of heating systems (Class A), in gas appliances and their auxiliary equipment (Class B) as well as in LPG storage (Class C) according to table 1.  Anaerobic jointing compounds are covered by EN 751-1, non-hardening sealing materials in the form of PTFE-tapes are covered by EN 751-3.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and test methods for anaerobic jointing compounds (hereafter referred to as "jointing compounds") suitable for sealing threaded metallic joints such as those specified in ISO 7-1. These jointing compounds are for use in contact with 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG) not including LPG in the liquid form) and hot water of heating systems.  [The scope of the complete standard includes a table.]

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This method indicates only essential features ans should be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. The degree of simplification depends on the kind of object represented, the scale of the drawing and the purpose of documentation. ISO 9222-2 deals with the detailed simplified representation.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

In contrast to the general simplified representation of part 1, this method shows more details of a seal, for example the configuration of lips. It should also be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. Elements and examples of this representation mode are given in tables and figures.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

In contrast to the general simplified representation of part 1, this method shows more details of a seal, for example the configuration of lips. It should also be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. Elements and examples of this representation mode are given in tables and figures.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    12 pages
    French language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

This method indicates only essential features ans should be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. The degree of simplification depends on the kind of object represented, the scale of the drawing and the purpose of documentation. ISO 9222-2 deals with the detailed simplified representation.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

2018-06-15 Project abandoned as ISO abandoned the project.

  • Draft
    293 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2018-06-15 Project abandoned as ISO abandoned the project.

  • Draft
    293 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements and test methods for unsintered polytetrafluorethylene (PTFE) tapes (hereafter referred to as PTFE tapes) which are suitable for sealing threaded metallic joints as specified in ISO 7-1. The PTFE tapes are typically for use in installations for 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG)) up to 5 bar and up to 7 bar for hot water of heating systems (Class A) as well as up to 0,2 bar in gas appliances and their auxiliary equipment (Class B). The maximum working pressure covered in this European Standard is 20 bar which is relevant to LPG storage (Class C). The temperature range is limited to - 20 øC to 125 øC.  NOTE:  For applications outside the scope of this Standard (e.g. compressed gases) the purchaser should consult the manufacturer.  Anaerobic jointing compounds are covered by EN 751-1, non-hardening sealing materials in form of - e.g. jointing compound paste - are covered by EN 751-2.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4708:2015 spécifie les méthodes d'essai pour déterminer les caractéristiques de l'aggloméré composé de liège et du liège et caoutchouc destinés à la fabrication de joints pour industries mécaniques. Les caractéristiques suivantes sont prises en considération: - épaisseur, - masse volumique apparente, - résistance à la traction, - compressibilité et récupération, - flexibilité, - résistance à l'eau bouillante, - comportement dans les fluides.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This standard specifies, for the purpose of type examination, the requirements, the test methods and the marking of domestic flueless space heaters, including diffusive catalytic combustion heaters, having a nominal heat input (Hs), not exceeding 4,2 kW burning third family gases at nominal operating pressures not exceeding 50 mbar, referred to in the text as 'appliances'.  It covers the following types of appliances:  a) fixed heaters burning commercial butane and/or commercial propane;  b) portable or mobile heaters burning either commercial butane, or, commercial butane and commercial propane including those that incorporate a compartment for a transportable refillable liquefied petroleum gas cylinder.  There are no specific thermal efficiency requirements appropriate to these types of appliance as:  c) all the heat produced by the combustion process is released into the space to be heated;  d) the requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas.  It does not cover appliances incorporating electrically operated gas control systems.  Annex A gives the details of the categories of appliances marketed in various countries.  Requirements for appliances given in this standard assume the supply of gas from the container will be governed by a pressure regulator having a maximum nominal outlet pressure of 50 mbar.  This standard does not cover cylinders for liquefied gas or their associated regulators.

  • Standard + National Annex and/or Foreword
    71 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

This method indicates only essential features ans should be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. The degree of simplification depends on the kind of object represented, the scale of the drawing and the purpose of documentation. ISO 9222-2 deals with the detailed simplified representation.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

In contrast to the general simplified representation of part 1, this method shows more details of a seal, for example the configuration of lips. It should also be used when it is not necessary to show the exact shape and details of the seals, for example in assembly drawings. Elements and examples of this representation mode are given in tables and figures.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    12 pages
    French language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

This European Standard specifies requirements and test methods for homogeneous rubbers for static  eals used in domestic gas appliances of all categories, and in auxiliary equipment mounted or intended to be mounted on such appliances which are in contact with combustible gases up to 200 mbar (not including LPG in liquid phase).  This standard does not specify the geometrical characteristics of the seals.           The normal range of envisaged operating temperatures covered by this standard is 0 øC to 60 øC. Temperatures outside this range can be proposed by the manufacturer with limits between - 20 øC and + 150 øC.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off