25.220 - Surface treatment and coating
ICS 25.220 Details
Surface treatment and coating
Oberflachenbehandlung. Oberflachenbeschichtung
Traitement et revetement de surface
Površinska obdelava in prevleke
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 25.220 - Surface treatment and coating
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
ISO 14920:2015 defines the procedure for thermal spraying of self-fluxing alloys that are simultaneously or subsequently fused to create a homogeneous, diffusion bonded coating.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the procedure for thermal spraying of self-fluxing alloys that are simultaneously or subsequently fused to create a homogeneous, diffusion-bonded coating.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This document specifies the requirement for coating mass, other properties and testing of zinc and zinc alloy coatings on steel wire and steel wire products of circular or other section.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the designation and the characterization methods of the decorative metallic coatings of the products for radio wave transmissive application. The designation consists of the transmission loss of the radio wave, the frequency band of the radio wave under consideration, the lightness and hue of the parts, as well as the main material and manufacturing process of metallic coatings. The characterization methods consist of the determination of the transmission loss of radio wave with specific frequency band and the evaluation of lightness and hue which represent the colour and appearance.
- Standard20 pagesEnglish languagesale 15% off
- Draft20 pagesEnglish languagesale 15% off
- Draft20 pagesEnglish languagesale 15% off
This document specifies the requirement for coating mass, other properties and testing of zinc and zinc alloy coatings on steel wire and steel wire products of circular or other section.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes the procedure for the measurement of the feed rate for thermal spraying with spray materials in powder form in a production environment.
The application of this document is essential if information on the feed rate of a spray material in powder form is required when using a thermal spraying method.
It is applicable to any thermal spraying method using spray materials in powder form (see EN ISO 14917) where the technical installation used allows the spray powder to be fed through without an activated spray gun.
The determination of the feed rate is mandatory for the preparation of thermal spray procedure specifications in accordance with EN 17002 and the determination of the deposition efficiency in accordance with EN ISO 17836.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies the information to be supplied by the purchaser to the finisher, requirements
and test methods for electropolishing as a means of smoothing and passivating stainless steel alloys in the S2XXXX,
S3XXXX and S4XXXX series, and the precipitation hardened alloys (see ISO/TR 15510 for information on composition).
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes the procedure for the measurement of the feed rate for thermal spraying with spray materials in powder form in a production environment.
The application of this document is essential if information on the feed rate of a spray material in powder form is required when using a thermal spraying method.
It is applicable to any thermal spraying method using spray materials in powder form (see EN ISO 14917) where the technical installation used allows the spray powder to be fed through without an activated spray gun.
The determination of the feed rate is mandatory for the preparation of thermal spray procedure specifications in accordance with EN 17002 and the determination of the deposition efficiency in accordance with EN ISO 17836.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the information to be supplied by the purchaser to the finisher, requirements and test methods for electropolishing as a means of smoothing and passivating stainless steel alloys in the S2XXXX, S3XXXX and S4XXXX series, and the precipitation hardened alloys (see ISO 15510 for information on composition).
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the information to be supplied by the purchaser to the finisher, requirements and test methods for electropolishing as a means of smoothing and passivating stainless steel alloys in the S2XXXX, S3XXXX and S4XXXX series, and the precipitation hardened alloys (see ISO 15510 for information on composition).
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
This Part of EN 13523 describes the procedure for determining objectively the chalking resulting from natural or artificial weathering of an organic coating on a metallic substrate. The advantage of this procedure for measuring chalking of an organic coating is that the result can be read off immediately on an instrument. Subjective judgement by visual comparison of test specimens with referencee specimens is not necessary. Experience to date with this test method has been based mainly on artificially weathered specimens. Reproductible results can only de obtained by careful execution of the test.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes the procedure for determining objectively the chalking resulting from natural or artificial weathering of an organic coating on a metallic substrate.
The advantage of this procedure for measuring chalking of an organic coating is that the result can be read off immediately on an instrument. Subjective judgement by visual comparison of test specimens with reference specimens is not necessary.
Reproducible results can only be obtained by careful execution of the test. Special attention is paid to the adhesive tape and its application to the test surface.
The test method is not applicable to embossed coatings. In the case of textured coatings, the degree of texture will influence readings. Also, dirt collection can influence readings on outdoor weathered specimens.
NOTE Different methods for assessing chalking are in use. The results of these different methods are not comparable.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies recommendations and requirements for the selection of coating materials, the pre-treatment of rollers, the preparation and post-treatment of the coatings, as well as the quality and performance evaluation of high velocity oxygen fuel (HVOF) cermet coatings used on metallurgical roll components. This document is applicable to four metallurgical rollers: pot inner roller (sink/stabilizing roller) of continuous galvanized line (CGL), cold rolling process roller, hot-rolled straightening roller and furnace roller.
- Standard11 pagesEnglish languagesale 15% off
This document specifies the designation and the characterization methods metallic coatings that provide electromagnetic interference (EMI) shielding for parts fabricated from plastics, ceramics, glasses and other materials. The designation consists of the EMI shielding effectiveness in a specific frequency range and the adhesion of metallic coatings to the substrate, as well as the substrate material and the principal component, manufacturing process and thickness of the metallic coatings. The characterization methods consist of the methods to determine the EMI shielding effectiveness of metallic coatings and those to evaluate the adhesion of metallic coatings to the substrate.
- Standard19 pagesEnglish languagesale 15% off
This document specifies three methods for the determination of water-soluble chlorides in non-metallic blast-cleaning abrasives, namely, amperometric titration, spectro-photometry and ion chromatography.
This document is part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.
The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series.
The ISO 11126 series and the ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies three procedures to test the service life of a blast-cleaning abrasive under laboratory conditions.
The performance of an abrasive is also measured by its ability to clean, via transmission of kinetic energy to the substrate in the blasting process. This document also specifies the procedures that can be performed in the same testing machines to help evaluate abrasive performance under laboratory conditions.
This document applies to the testing of virgin metallic blasting media in the delivery state by centrifugal blasting under laboratory conditions.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives guidance on the selection of test methods for evaluating the performance of vitreous and porcelain enamelled finishes in different applications. This document references the test methods available for measuring the properties of these finishes and correlates these properties to the requirements of specific enamelled articles.
This document is limited for the most part to test methods in ISO documents or European standards but does not provide acceptance criteria or performance limits for the properties.
This document is applicable to all enamelled articles, irrespective of their basis metals.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of water-soluble contaminants in non-metallic blast-cleaning abrasives by conductivity measurement.
This is one of a number of parts in the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.
The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series.
The ISO 11126 series and the ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies three methods for the determination of water-soluble chlorides in non-metallic blast-cleaning abrasives, namely, amperometric titration, spectro-photometry and ion chromatography.
This document is part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.
The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series.
The ISO 11126 series and the ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
This proposal specifies a method of test for determining the scratch hardness of the surface of vitreous
and porcelain enamels.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft6 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a simulating method of test for determination of the release of metal-ions from enamelled articles, which are intended to come into contact with food.
This document also specifies limits for the release of metal-ions from enamelled articles, which are intended to come into contact with food.
This document is applicable to enamelled articles, including tanks and vessels, which are intended to be used for the preparation, cooking, serving and storage of food.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the basic conditions concerning the method for determining the resistance of
vitreous and porcelain enamelled articles to heat.
The method specified is applicable to vitreous and porcelain enamelled articles that will, in service, be
subjected to high temperature, for example to some cooker components, exhaust pipe silencers, gas
heating chimneys and flue pipes.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements for the design and use of vitreous enamel coated bolted
cylindrical steel tanks for the storage or treatment of water or municipal or industrial effluents and
sludges.
It is applicable to the design of the tank and any associated roof and gives guidance on the requirements
for the design of the foundation.
It is applicable where:
a) the tank is cylindrical and is mounted on a load-bearing base substantially at or above ground level;
b) the product of the tank diameter in metres and the wall height in metres lies within the range
5 to 500;
c) the tank diameter does not exceed 100 m and the total wall height does not exceed 50 m;
d) the stored material has the characteristics of a liquid, exerting a negligible frictional force on the
tank wall; the stored material can be undergoing treatment as part of a municipal or industrial
effluent treatment process;
e) the internal pressure in the headspace above the liquid does not exceed 50 kPa and the internal
partial vacuum above the liquid does not exceed 10 kPa;
f) the walls of the tank are vertical;
g) the floor of the tank is substantially flat at its intersection with the wall; the floor of the tank can
have a rise or fall built in to allow complete emptying of the tank contents, the slope of which does
not exceed 1:100;
h) there is negligible inertial and impact load due to tank filling;
i) the minimum thickness of the tank shell is 1,5 mm;
j) the material used for the manufacture of the steel sheets is carbon steel (tanks constructed of
sheets made from aluminium or stainless steel are outside the scope of this document);
k) the temperature of the tank wall during operation is within the range −50 °C to +100 °C under all
operating conditions.
This document also gives details of procedures to be followed during installation on site and for
inspection and maintenance of the installed tank.
It does not apply to chemical-reaction vessels.
It does not cover resistance to fire.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for non-destructive measurements of the thickness of conductive coatings on non-conductive base materials. This method is based on the principle of the sheet resistivity measurement and is applicable to any conductive coatings and layers of metal and semiconductor materials. In general, the probe has to be adjusted to the conductivity and the thickness of the respective application. However, this document focuses on metallic coatings on non-conductive base materials (e.g. copper on plastic substrates, printed circuit boards).
This method is also applicable to thickness measurements of conductive coatings on conductive base materials, if the resistivity of the coating and the base material is significantly different. However, this case is not considered in this document.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies spectroscopic ellipsometry for the determination of optical properties (refractive index n and extinction coefficient k) and the optical classification of different types of amorphous carbon films within the n-k plane.
It is applicable to amorphous carbon films deposited by ionized evaporation, sputtering, arc deposition, plasma-assisted chemical vapour deposition, hot filament techniques and others.
It does not apply to carbon films modified with metals or silicon, amorphous carbon films that have a gradient of composition/property in the thickness, paints and varnishes.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for measuring the thickness of the individual nickel layers in electroplated multilayer nickel coatings and measuring the potential differences between the individual nickel layers in electroplated multilayer nickel coatings.
The measurement of coatings or layer systems other than electroplated multilayer nickel coatings is outside the scope of this document.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies three methods for the determination of water-soluble chlorides in non-metallic blast-cleaning abrasives, namely, amperometric titration, spectro-photometry and ion chromatography. This document is part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series. The ISO 11126 series and the ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives.
- Standard6 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies a test method for the determination of the crack formation temperature of
enamels for the chemical industry by subjecting enamelled steel specimens to thermal shock using cold
water.
The value of the crack formation temperature measured according to this test method does not apply to
the finished component (see Annex A). It is a parameter of vitreous and porcelain enamels for comparing
the relative quality of different enamel formulations.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of water-soluble contaminants in non-metallic blast-cleaning abrasives by conductivity measurement.
This is one of a number of parts in the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.
The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series.
The ISO 11126 series and the ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements for the design and use of vitreous enamel coated bolted cylindrical steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges.
It is applicable to the design of the tank and any associated roof and gives guidance on the requirements for the design of the foundation.
It is applicable where:
a) the tank is cylindrical and is mounted on a load-bearing base substantially at or above ground level;
b) the product of the tank diameter in metres and the wall height in metres lies within the range 5 to 500;
c) the tank diameter does not exceed 100 m and the total wall height does not exceed 50 m;
d) the stored material has the characteristics of a liquid, exerting a negligible frictional force on the tank wall; the stored material can be undergoing treatment as part of a municipal or industrial effluent treatment process;
e) the internal pressure in the headspace above the liquid does not exceed 50 kPa and the internal partial vacuum above the liquid does not exceed 10 kPa;
f) the walls of the tank are vertical;
g) the floor of the tank is substantially flat at its intersection with the wall; the floor of the tank can have a rise or fall built in to allow complete emptying of the tank contents, the slope of which does not exceed 1:100;
h) there is negligible inertial and impact load due to tank filling;
i) the minimum thickness of the tank shell is 1,5 mm;
j) the material used for the manufacture of the steel sheets is carbon steel (tanks constructed of sheets made from aluminium or stainless steel are outside the scope of this document);
k) the temperature of the tank wall during operation is within the range −50 °C to +100 °C under all operating conditions.
This document also gives details of procedures to be followed during installation on site and for inspection and maintenance of the installed tank.
It does not apply to chemical-reaction vessels.
It does not cover resistance to fire.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the basic conditions concerning the method for determining the resistance of vitreous and porcelain enamelled articles to heat.
The method specified is applicable to vitreous and porcelain enamelled articles that are, in service, subjected to high temperature, for example, to some cooker components, exhaust pipe silencers, gas heating chimneys and flue pipes.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for non-destructive measurements of the thickness of conductive coatings on non-conductive base materials. This method is based on the principle of the sheet resistivity measurement and is applicable to any conductive coatings and layers of metal and semiconductor materials. In general, the probe has to be adjusted to the conductivity and the thickness of the respective application. However, this document focuses on metallic coatings on non-conductive base materials (e.g. copper on plastic substrates, printed circuit boards).
This method is also applicable to thickness measurements of conductive coatings on conductive base materials, if the resistivity of the coating and the base material is significantly different. However, this case is not considered in this document.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for measuring the thickness of the individual nickel layers in electroplated multilayer nickel coatings and measuring the potential differences between the individual nickel layers in electroplated multilayer nickel coatings.
The measurement of coatings or layer systems other than electroplated multilayer nickel coatings is outside the scope of this document.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method of test for determining the scratch hardness of the surface of vitreous and porcelain enamels.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft6 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies spectroscopic ellipsometry for the determination of optical properties (refractive index n and extinction coefficient k) and the optical classification of different types of amorphous carbon films within the n-k plane.
It is applicable to amorphous carbon films deposited by ionized evaporation, sputtering, arc deposition, plasma-assisted chemical vapour deposition, hot filament techniques and others.
It does not apply to carbon films modified with metals or silicon, amorphous carbon films that have a gradient of composition/property in the thickness, paints and varnishes.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for the determination of the crack formation temperature of enamels for the chemical industry by subjecting enamelled steel specimens to thermal shock using cold water.
The value of the crack formation temperature measured according to this test method does not apply to the finished component (see Annex A). It is a parameter of vitreous and porcelain enamels for comparing the relative quality of different enamel formulations.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the basic conditions concerning the method for determining the resistance of vitreous and porcelain enamelled articles to heat. The method specified is applicable to vitreous and porcelain enamelled articles that are, in service, subjected to high temperature, for example, to some cooker components, exhaust pipe silencers, gas heating chimneys and flue pipes.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies the requirements for the design and use of vitreous enamel coated bolted cylindrical steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges. It is applicable to the design of the tank and any associated roof and gives guidance on the requirements for the design of the foundation. It is applicable where: a) the tank is cylindrical and is mounted on a load-bearing base substantially at or above ground level; b) the product of the tank diameter in metres and the wall height in metres lies within the range 5 to 500; c) the tank diameter does not exceed 100 m and the total wall height does not exceed 50 m; d) the stored material has the characteristics of a liquid, exerting a negligible frictional force on the tank wall; the stored material can be undergoing treatment as part of a municipal or industrial effluent treatment process; e) the internal pressure in the headspace above the liquid does not exceed 50 kPa and the internal partial vacuum above the liquid does not exceed 10 kPa; f) the walls of the tank are vertical; g) the floor of the tank is substantially flat at its intersection with the wall; the floor of the tank can have a rise or fall built in to allow complete emptying of the tank contents, the slope of which does not exceed 1:100; h) there is negligible inertial and impact load due to tank filling; i) the minimum thickness of the tank shell is 1,5 mm; j) the material used for the manufacture of the steel sheets is carbon steel (tanks constructed of sheets made from aluminium or stainless steel are outside the scope of this document); k) the temperature of the tank wall during operation is within the range −50 °C to +100 °C under all operating conditions. This document also gives details of procedures to be followed during installation on site and for inspection and maintenance of the installed tank. It does not apply to chemical-reaction vessels. It does not cover resistance to fire.
- Standard27 pagesEnglish languagesale 15% off
- Standard29 pagesFrench languagesale 15% off
This document specifies a method of test for determining the scratch hardness of the surface of vitreous and porcelain enamels.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This International Standard specifies a method of determining, by successive thermal shock tests, the
behaviour of vitreous and porcelain enamelled cooking utensils and similar articles under sudden
changes of temperature (resistance to thermal shock).
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
Applies to enamelled walls of roasting devices, grills and baking devices; self-cleaning consists in the capacity first to absorb oil or fat in droplet form, and then to volatilize the greater part of the fat or oil by the sequential processes of distillation, decomposition, and combustion. Is not applicable to pyrolytically cleaning enamels.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft4 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies a test method which is used as a factory production control test. The test is not intended to be used for testing the adhesion of the enamel. Annexes A and B are for information only.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for the determination of the crack formation temperature of enamels for the chemical industry by subjecting enamelled steel specimens to thermal shock using cold water. The value of the crack formation temperature measured according to this test method does not apply to the finished component (see Annex A). It is a parameter of vitreous and porcelain enamels for comparing the relative quality of different enamel formulations.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
This document specifies a method for the determination of water-soluble contaminants in non-metallic blast-cleaning abrasives by conductivity measurement. This is one of a number of parts in the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series. The ISO 11126 series and the ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
This document specifies the general properties of hot dip galvanized coatings and test methods for
hot dip galvanized coatings applied by dipping fabricated iron and steel articles (including certain
castings) in a zinc melt (containing not more than 2 % of other metals). This document does not apply
to the following:
a) sheet, wire and woven or welded mesh products that are continuously hot dip galvanized;
b) tube and pipe that are hot dip galvanized in automatic plants;
c) hot dip galvanized products (e.g. fasteners) for which specific standards exist and which can
include additional requirements or requirements which are different from those of this document.
NOTE Individual product standards can incorporate this document for the galvanized coating by quoting
its number, or can incorporate it with modifications specific to the product. Different requirements can also be
made for galvanized coatings on products intended to meet specific regulatory requirements.
This document does not apply to after-treatment or additional coating of hot dip galvanized articles.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft21 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines the terms related to the general types of surface-finishing processes. Emphasis is placed on practical usage in surface-finishing technology in the metal-finishing field.
This document does not include terms for porcelain and vitreous enamel, thermally sprayed coatings and galvanising for which specialized vocabularies and glossaries exist. For the most part, basic terms that have the same meaning in surface finishing as in other fields of technology, and that are defined in handbooks and dictionaries of chemistry and physics, are not included.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for continuously organic coated (coil coated) steel flat products. It particularly specifies the performance requirements.
The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).
NOTE National provisions can set up relationships between the performances of the coatings as required in this document and the outdoor atmospheres and ambiances required for a relevant building under study.
This document is not applicable to continuously organic coated flat products made of:
- tin mill products;
- electrical steels.
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft40 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies a method of determining, by successive thermal shock tests, the
behaviour of vitreous and porcelain enamelled cooking utensils and similar articles under sudden
changes of temperature (resistance to thermal shock).
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies a test method which is used as a factory production control test. The test is not intended to be used for testing the adhesion of the enamel. Annexes A and B are for information only.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft7 pagesEnglish languagesale 10% offe-Library read for1 day
Applies to enamelled walls of roasting devices, grills and baking devices; self-cleaning consists in the capacity first to absorb oil or fat in droplet form, and then to volatilize the greater part of the fat or oil by the sequential processes of distillation, decomposition, and combustion. Is not applicable to pyrolytically cleaning enamels.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft4 pagesEnglish languagesale 10% offe-Library read for1 day