83.160.99 - Other tyres

This document gives working definitions of masses and load cycles and specifies tyre loads and reference inflation pressures for tyres primarily intended for earth-mover machines.

This document specifies designations and dimensions for earth-mover tyres and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165.

This document specifies the main requirements of the metric series of pneumatic tyres primarily intended for industrial vehicles, including designations, dimensions and markings. The tyres are based on the following parameters: — speeds not exceeding 50 km/h; — use on 5° tapered or flat base rims. The conversion of code-designated industrial tyres into metric-designated tyres is outside the scope of this document.

This document specifies the load ratings of the metric series of pneumatic tyres primarily intended for industrial vehicles for use on prepared surfaces. ISO 3739-1 deals with designation, dimensions and marking; ISO 3739-3 deals with rim contours for these tyres.

This document specifies the designation, dimensions, approved rim contours, load ratings and reference speeds for agricultural tyres fitted to construction machines (e.g. backhoe loaders, small dumpers, loaders, excavators) operating on building sites under loading and transport conditions. Tyres conforming to this document are identified by the suffix IND in the tyre size designation; code designated tyres can alternatively, in place of the suffix IND, be identified by the classification code R-4. NOTE Agricultural tyres without the suffix IND in the tyre size designation or with a classification code differing from "R-4" are not part of this document. Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines are part of ISO 4251-1 and ISO 4251-2. Code designated radial tyres for agricultural tractors, trailers and machines are part of ISO 8664. Metric designated tyres for agricultural tractors, trailers and machines are part of ISO 7867-2. Tyres for forestry machines, identified by suffix LS, or classification code LS-x are part of ISO 18807.

This document specifies the main requirements, including designations, dimensions and markings, of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial machines for use on prepared surfaces. Rim contours fitting these tyres are specified in ISO 3739-1 and ISO 3739-3.

ISO 10571:2016 specifies the designation, dimensions, load ratings and reference speed for tyres and rims fitted to vehicles, such as all-terrain equipment, mobile cranes, crash tenders, etc., likely to operate on highway over long distances at reference speed and under constant load.

Specifies the main requirements of the metric series of tyres. Gives the tyre designations to be used. Tabulates the ratings needed.

ISO 4250-1:2017 specifies designations and dimensions for earth-mover tyres and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165. The ISO 4250 series consists of three parts which specify the technical elements relating to designation and dimensions of tyres and rims for earth-movers; it also gives load tables for these tyres.

The ISO 4250 series consists of three parts laying down the technical designation and dimensions of tyres and rims for earth-movers; it also gives load tables for these tyres. ISO 4250-2:2017 gives working definitions of masses and load cycles and specifies tyre loads and reference inflation pressures for narrow- and wide-base tyres primarily intended for earth-mover machines.

ISO 4250-2:2014 gives working definitions of masses and load cycles, and specifies tyre loads and reference inflation pressures for narrow- and wide-base tyres primarily intended for earth-mover machines.

ISO 4250-1:2014 specifies designations and dimensions for earth-mover tyres and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165.

ISO 10571:2011 specifies the designation, dimensions, load ratings and reference speed for tyres and rims fitted to vehicles such as all-terrain equipment, mobile cranes, crash tenders, etc. likely to operate on highway over long distances at reference speed and under constant load.

ISO 3739-1:2007 specifies the main requirements of the metric series of pneumatic tyres primarily intended for industrial vehicles, including designations, dimensions and markings. The tyres are based on the following parameters: speeds not exceeding 50 km/h; use on 5° tapered or flat base rims. The conversion of code-designated industrial tyres into metric-designated tyres is outside the scope of ISO 3739-1:2007.

ISO 4250-2:2006 gives working definitions of masses and load cycles, and specifies tyre loads and reference inflation pressures for narrow and wide base tyres primarily intended for earth-mover machines.

ISO 4250-1:2006 specifies designations and dimensions for earth-mover tyres, and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165.

ISO 13442:2004 sets the designation, dimensions, load ratings and reference speeds for tyres and rims fitted to construction machines (backhoe loaders, small dumpers, loaders, excavators etc.) operating on building sites under loading and transport conditions.

Technical elements relating to designation and dimensions of tyres and rims for earth-movers. It also contains load tables for these tyres.

Provides the designation, dimensions, load ratings and reference speed for tyres and rims of all-terrain vehicles, mobile cranes and similar specialized vehicles likely to operate on the highway over long distances.

Gives definitions of masses, operating conditions and load cycles, and defines tyre loads and reference inflation pressures for narrow and wide base tyres primarily used for earth-mover machines. Cancels and replaces the second edition, which has been technically revised.

Applies to tyres primarily intended for industrial vehicles for use on prepared surfaces (counterbalanced lift trucks, side loaders, and other vehicles). Defines a reference load-carrying capacity which the load rating is based on.

Applies to tyres primarily intended for industrial vehicles for use on prepared surfaces. The tyres are based on the following parameters: speeds not exceeding 50 km/h, rim diameters not exceeding rim diameter code of 15.