91.140.99 - Other installations in buildings
ICS 91.140.99 Details
Other installations in buildings
Weitere Gebaudeinstallationen
Autres installations dans les batiments
Druge napeljave v stavbah
General Information
This standard specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination in residential and non-residential buildings and for calculating or measuring the amount of energy required or used for lighting in buildings. The method may be applied to new, existing or refurbished buildings. It also provides a methodology (LENI) as the measure of the energy efficiency of the lighting installations in buildings.
This standard does not cover lighting requirements, the design of lighting systems, the planning of lighting installations, the characteristics of lighting equipment (lamps, control gear and luminaires) and systems used for display lighting, desk lighting or luminaires built into furniture. This standard does not provide any procedure for the dynamic simulation of lighting scene setting.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2.
(...)
- Standard106 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination in residential and non-residential buildings and for calculating or measuring the amount of energy required or used for lighting in buildings. The method may be applied to new, existing or refurbished buildings. It also provides a methodology (LENI) as the measure of the energy efficiency of the lighting installations in buildings.
This standard does not cover lighting requirements, the design of lighting systems, the planning of lighting installations, the characteristics of lighting equipment (lamps, control gear and luminaires) and systems used for display lighting, desk lighting or luminaires built into furniture. This standard does not provide any procedure for the dynamic simulation of lighting scene setting.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2.
(...)
- Standard106 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 52000-1:2017 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way.
It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings 'as built', and existing buildings in the use phase as well as renovation.
NOTE Table 1 in the Introduction shows the relative position of ISO 52000-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1:2017.
- Standard141 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft97 pagesEnglish languagesale 10% offe-Library read for1 day
ISO/TR 52000-2:2017 refers to the overarching EPB-standard, ISO 52000‑1[1].
It contains information to support the correct understanding, use and national implementation of ISO 52000‑1. This includes:
- explanation on the procedures and background information and justification of the choices that have been made;
- reporting on validation of calculation procedures given in the standard;
- explanation for the user and for national standards writers involved with implementation of the set of EPB standards, including detailed examples.
- Technical report193 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Report will provide information to support the correct understanding, use and
national implementations of EN 15193–1. It will give explanations on the procedures and
background information. It will also provide justifications of the choices that have been made
and give validations of the calculation procedures given in the standards. It will give detailed
examples to illustrate the total workings of the standard.
- Technical report187 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Specification describes the basic principles to be followed in the development of standards intended to support the assessment of the energy performance of buildings using a holistic approach. The main goal is to obtain a set of EPB-standards that are a systematic, clear and comprehensive package for the benefit of professionals and government entities.
This Technical Specification gives general, qualitative guidance on the required quality, accuracy, usability and consistency of EPB-standards in order to provide a balance between:
- the accuracy and level of detail, and
- the simplicity and availability of input data.
Hidden complexities are also taken into account, such as the impact of differences in the overall legal frameworks on the national choices and national input data.
The basic principles are the basis for detailed technical rules and for a common overarching structure for the set of EPB-standards.
The basic principles for EPB-standards cover the following aspects:
- the standardization process, including collaborations and consultations;
- the application range of the standards;
- common general organisation of each standard and the national implementation;
- the overarching structure for the energy performance assessment;
- common model(s) and editorial rules for each standard;
- common quality aspects for each standard.
- Technical specification38 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft38 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Specification provides guidance in the form of detailed technical rules based on the basic principles, both for the overarching standard and for each standard within the set of EPB-standards.
These detailed technical rules give practical rules on the following subjects for EPB-standards:
- the standardisation process, including collaborations and consultations;
- the application range of the standards;
- common general organisation of each standard and the national implementation;
- the overarching structure for the energy performance assessment;
- common model(s) and editorial rules for each standard;
- common quality aspects for each standard.
- Technical specification38 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination in residential and non-residential buildings and for calculating or measuring the amount of energy required or used for lighting in buildings. The method may be applied to new, existing or refurbished buildings. It also provides a methodology (LENI) as the measure of the energy efficiency of the lighting installations in buildings.
This standard does not cover lighting requirements, the design of lighting systems, the planning of lighting installations, the characteristics of lighting equipment (lamps, control gear and luminaires) and systems used for display lighting, desk lighting or luminaires built into furniture. This standard does not provide any procedure for the dynamic simulation of lighting scene setting.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2.
(...)
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination in residential and non-residential buildings and for calculating or measuring the amount of energy required or used for lighting in buildings. The method may be applied to new, existing or refurbished buildings. It also provides a methodology (LENI) as the measure of the energy efficiency of the lighting installations in buildings.
This standard does not cover lighting requirements, the design of lighting systems, the planning of lighting installations, the characteristics of lighting equipment (lamps, control gear and luminaires) and systems used for display lighting, desk lighting or luminaires built into furniture. This standard does not provide any procedure for the dynamic simulation of lighting scene setting.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2.
(...)
- Standard101 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides an outline of the calculation procedure for assessing the energy performance of buildings. It includes a list of the European standards, both existing and those that are being written, which together form the calculation methodology.
- Technical report60 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft61 pagesEnglish languagesale 10% offe-Library read for1 day
The purpose of the standard is to:
a) collate results from other standards that calculate energy use for specific services within a building;
b) account for energy generated in the building, some of which may be exported for use elsewhere;
c) present a summary of the overall energy use of the building in tabular form;
d) provide energy ratings based on primary energy, carbon dioxide emission or other parameters defined by national energy policy;
e) establish general principles for the calculation of primary energy factors and carbon emission coefficients.
This standard defines the energy services to be taken into account for setting energy performance ratings for planned and existing buildings, and provides for this:
f) method to compute the standard calculated energy rating, a standard energy use that does not depend on occupant behaviour, actual weather and other actual (environment or indoor) conditions;
g) method to assess the measured energy rating, based on the delivered and exported energy;
h) methodology to improve confidence in the building calculation model by comparison with actual energy use;
i) method to assess the energy effectiveness of possible improvements.
This European standard is applicable to a part of a building (e.g. flat), a whole building, or several buildings.
It is up to national bodies to define under which conditions, for which purposes and for which types of buildings the various ratings apply.
This standard handles the energy performance of a building as a whole. The assessment of the energy performance of specific technical building systems is handled in the appropriate part of EN 15241, prEN 15243 and EN 15316 series.
- Standard62 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a set of assumptions, requirements and validation tests for procedures used for the calculation of the annual energy needs for space heating and cooling of a room in a building where the calculations are done with a time step of one hour or less.
This European Standard does not impose any specific numerical technique for the calculation of the room heating or cooling need and the internal temperatures of a room.
The purpose of this European Standard is to validate calculation methods used to:
assess the energy performance of each room of a building;
provide energy data to be used as interface with system performance analysis (heating, cooling, ventilating, lighting, domestic hot water etc).
The validation procedure is used to check the energy need for space heating and cooling based on a transient sensible heat balance model, taking into account:
the external surface heat balance;
the conduction through the building envelope;
the thermal capacities of external and internal structures;
the internal surface heat balance;
the air heat balance;
the heat balance solution method.
All other aspects are given either by prescribed boundary conditions or by input data and are not part of the model validation. It is assumed, that for all these other matters e.g. embedded heating and cooling systems, prescriptive models have to be used according to existing European Standards.
The system performance analysis and moisture balance are not within the scope of this European Standard.
- Standard74 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard sets out the level of input and output data, and prescribes the boundary conditions required for a calculation method of the sensible cooling load of a single room under constant and/or floating temperature taking into account the limit of the peak cooling load of the system. It includes a classification scheme of the calculation method and the criteria to be met by a calculation method in order to comply with this European Standard.
The purpose of this European Standard is to validate calculation methods used to:
evaluate the maximum cooling load for equipment selection and cooling system design;
evaluate the temperature profile when the cooling capacity of the system is reduced;
provide data for evaluation of the optimum possibilities for load reduction;
allow analysis of partial loads as required for system design, operation and control.
The validation procedure is used to check the room sensible heat balance model, taking into account:
the external surface heat balance;
the conduction through the building envelope;
the effect of the thermal mass of the structures;
the internal surface heat balance;
the air heat balance;
the heat balance solution method.
All other aspects are given either by fixed boundary conditions or by input data and are not in the focus of the model validation. It is assumed that for all these other matters e.g. embedded heating and cooling systems, prescriptive models have to be used according to existing European Standards.
Informative Annex A gives a simplified method for cooling load calculation.
- Standard45 pagesEnglish languagesale 10% offe-Library read for1 day
TC - Modification in the E mother version and in the F reference version regarding Table F.1.
- Corrigendum4 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the calculation methodology for the evaluation of the amount of energy used for indoor lighting inside the building and provides a numeric indicator for lighting energy requirements used for certification purposes. This European Standard can be used for existing buildings and for the design of new or renovated buildings. It also provides reference schemes to base the targets for energy allocated for lighting usage. This European Standard also provides a methodology for the calculation of instantaneous lighting energy use for the estimation of the total energy performance of the building. Parasitic powers not included in the luminaire are excluded.
In this European Standard, the buildings are classified in the following categories: offices, education buildings, hospitals, hotels, restaurants, sports facilities, wholesale and retail services and manufacturing factories.
In some locations outside lighting may be fed with power from the building. This lighting may be used for illumination of the façade, open-air car park lighting, security lighting, garden lighting etc. These lighting systems may consume significant energy and if they are fed from the building, this load will not be included in the Lighting Energy Numeric Indicator or into the values used for heating and cooling load estimate. If metering of the lighting load is employed, these loads may be included in the measured lighting energy.
- Standard78 pagesEnglish languagesale 10% offe-Library read for1 day