This document specifies the minimum requirements for the protection of helium cryostats against excessive pressure rise, including the specific risks associated with cryostats for superconducting magnets and cryostats for superconducting radio-frequency cavities, coldboxes of helium refrigerators and liquefiers as well as helium distribution systems including valve boxes. It includes information on risk assessment, protection concepts, dimensioning of pressure relief devices, types of pressure relief devices, substance release and operation of helium cryostats.
In order to fulfil the aim of this document, the characteristics of pressure relief devices are taken into account.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    123 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the minimum requirements for the protection of helium cryostats against excessive pressure, including the specific risks associated with cryostats for superconducting magnets and cryostats for superconducting radio-frequency cavities, coldboxes of helium refrigerators and liquefiers as well as helium distribution systems including valve boxes. It includes risk assessment, protection concepts, dimensioning of pressure relief devices, types of pressure relief devices, substance release and operation of helium cryostats.
In order to fulfil the aim of this document, the characteristics of pressure relief devices are taken into account.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    123 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of this European Standard specifies the requirements for safety devices against excessive pressure in water tube boilers as defined in EN 12952-1.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies only the requirements for a product assembled from the in-series combination of safety valves or CSPRS (controlled safety pressure relief systems) according to ISO 4126‑1, ISO 4126‑4 and ISO 4126‑5, and bursting disc safety devices, according to ISO 4126‑2, installed upstream of the valve within five pipe diameters of the valve inlet. It specifies the design, application and marking requirements for such products, composed of the bursting disc safety device, a safety valve or CSPRS and, where applicable, a connecting pipe or spool piece. In addition, it gives a method for establishing the combination discharge factor used in sizing combinations.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies only the requirements for a product assembled from the in-series combination
of safety valves or CSPRS (controlled safety pressure relief systems) according to ISO 4126-1, ISO 4126-4
and ISO 4126-5, and bursting disc safety devices, according to ISO 4126-2, installed upstream of the
valve within five pipe diameters of the valve inlet. It specifies the design, application and marking
requirements for such products, composed of the bursting disc safety device, a safety valve or CSPRS
and, where applicable, a connecting pipe or spool piece. In addition, it gives a method for establishing
the combination discharge factor used in sizing combinations.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies only the requirements for a product assembled from the in-series combination of safety valves or CSPRS (controlled safety pressure relief systems) according to ISO 4126‑1, ISO 4126‑4 and ISO 4126‑5, and bursting disc safety devices, according to ISO 4126‑2, installed upstream of the valve within five pipe diameters of the valve inlet. It specifies the design, application and marking requirements for such products, composed of the bursting disc safety device, a safety valve or CSPRS and, where applicable, a connecting pipe or spool piece. In addition, it gives a method for establishing the combination discharge factor used in sizing combinations.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
  • Draft
    12 pages
    English language
    sale 15% off

This document specifies the requirements for bursting disc safety devices.
It includes the requirements for the design, manufacture, inspection, testing, certification, marking, and packaging.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements for bursting disc safety devices.
It includes the requirements for the design, manufacture, inspection, testing, certification, marking,
and packaging.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements for bursting disc safety devices. It includes the requirements for the design, manufacture, inspection, testing, certification, marking, and packaging.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard provides a separate calculation method for determining the contributing mass flow to be relieved resulting from each of the following specified conditions: - vacuum insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum. Outer jacket at ambient temperature. Inner vessel at temperature of the contents at the relieving pressure; - vacuum insulated vessels with insulation system remaining in place but with loss of vacuum, or non vacuum insulated vessels with insulation system intact. Outer jacket at ambient temperature. Inner vessel at temperature of the contents at the relieving pressure; - vacuum or non vacuum insulated vessels with insulation system remaining fully or partially in place, but with loss of vacuum in the case of vacuum insulated vessels, and fire engulfment. Inner vessel at temperature of the contents at the relieving pressure; - vessels with insulation system totally lost and fire engulfment. Good engineering practice based on well established theoretical physical science shall be adopted to determine the contributing mass flow where an appropriate calculation method is not provided for an applicable condition.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 4126-6:2014 gives guidance on the application, selection and installation of bursting disc safety devices used to protect pressure equipment from excessive pressure and/or excessive vacuum.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN ISO 4126-6 gives guidance on the application, selection and installation of bursting disc safety devices used to protect pressure equipment from excessive pressure and/or excessive vacuum. Annex A provides a checklist for the information to be supplied by the purchaser to the manufacturer. Annex B gives guidance on the replacement period of a bursting disc and annex C guidance on determining the mass flow rate, for single phase fluids, of a pressure relief system that contains a bursting disc safety device Annex E is a non-mandatory procedure for establishing the flow resistance of a burst bursting disc assembly. Annex F non-mandatory procedure for type testing of bursting disc safety devices Annex G provides typical performance characteristics for various bursting disc safety device types. The requirements for the manufacture, inspection, testing, marking, certification and packaging of bursting disc safety devices are given in ISO 4126-2.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4126-6:2014 gives guidance on the application, selection and installation of bursting disc safety devices used to protect pressure equipment from excessive pressure and/or excessive vacuum.

  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    41 pages
    French language
    sale 15% off
  • Standard
    41 pages
    French language
    sale 15% off

ISO 4126-4:2013 specifies general requirements for pilot operated safety valves, irrespective of the fluid for which they are designed. In all cases, the operation is carried out by the fluid in the system to be protected.
It is applicable to pilot operated safety valves having a valve flow diameter of 4 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature.
ISO 4126-4:2013 is a product standard and it is not applicable to applications of pilot operated safety valves.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4126-1:2013 specifies general requirements for safety valves irrespective of the fluid for which they are designed.
It is applicable to safety valves having a flow diameter of 4 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature.
ISO 4126-1:2013 is a product standard and is not applicable to applications of safety valves.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4126-7:2013 specifies requirements for safety valves. It contains information which is common to ISO 4126-1 to ISO 4126-6 to avoid unnecessary repetition.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4126-5:2013 specifies the requirements for controlled safety pressure relief systems (CSPRS) irrespective of the fluid for which they are designed.
It is applicable for main valves having a flow diameter of 4 mm and above which are for use at pressures of 0,1 bar gauge and above. No limitation is placed on temperature.
ISO 4126-5:2013 is a product standard and is not applicable to applications.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 4126 specifies general requirements for pilot operated safety valves, irrespective of the fluid for which they are designed. In all cases, the operation is carried out by the fluid in the system to be protected. It is applicable to pilot operated safety valves having a valve flow diameter of 4 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature. This is a product standard and it is not applicable to applications of pilot operated safety valves.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 4126 specifies the requirements for controlled safety pressure relief systems (CSPRS) irrespective of the fluid for which they are designed. It is applicable for main valves having a flow diameter of 4 mm and above which are for use at pressures of 0,1 bar gauge and above. No limitation is placed on temperature. This is a product standard and is not applicable to applications.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part of ISO 4126 contains information which is common to Parts 1 through 6 of ISO 4126 to avoid unnecessary repetition. The user is cautioned that it is not recommended to use the ideal gas formula presented in clause 6.3 when the relieving temperature is greater than 90 % of the thermodynamic critical temperature and the relieving pressure is greater than 50% of the thermodynamic critical pressure. Additionally, condensation is not considered. If condensation occurs, the method presented in clause 6.3 should not be used.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 4126 specifies general requirements for safety valves irrespective of the fluid for which they are designed. It is applicable to safety valves having a flow diameter of 4 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature. This is a product standard and is not applicable to applications of safety valves.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4126-7:2013 specifies requirements for safety valves. It contains information which is common to ISO 4126-1 to ISO 4126-6 to avoid unnecessary repetition.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off

ISO 4126-5:2013 specifies the requirements for controlled safety pressure relief systems (CSPRS) irrespective of the fluid for which they are designed. It is applicable for main valves having a flow diameter of 4 mm and above which are for use at pressures of 0,1 bar gauge and above. No limitation is placed on temperature. ISO 4126-5:2013 is a product standard and is not applicable to applications.

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off

ISO 4126-4:2013 specifies general requirements for pilot operated safety valves, irrespective of the fluid for which they are designed. In all cases, the operation is carried out by the fluid in the system to be protected. It is applicable to pilot operated safety valves having a valve flow diameter of 4 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature. ISO 4126-4:2013 is a product standard and it is not applicable to applications of pilot operated safety valves.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off

ISO 4126-1:2013 specifies general requirements for safety valves irrespective of the fluid for which they are designed. It is applicable to safety valves having a flow diameter of 4 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature. ISO 4126-1:2013 is a product standard and is not applicable to applications of safety valves.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off

ISO 4126-10:2010 specifies the sizing of safety valves for gas/liquid two-phase flow in pressurized systems such as: reactors, storage tanks, columns, heat exchangers, piping systems or transportation tanks/containers.

  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    50 pages
    French language
    sale 15% off

This European Standard is applicable to acetic acid used for treatment of water intended for human consumption. It describes the characteristics of acetic acid and specifies the requirements and the corresponding test methods for acetic acid. It gives information on its use in water treatment.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4126-9:2008 covers the application and installations of safety devices such as safety valves, safety valves and bursting disc safety devices in combination, pilot-operated safety valves and controlled safety pressure-relief systems for the protection of pressure equipment. ISO 4126-6 covers the selection, application and installation of bursting disc safety devices. ISO 4126-9:2008 describes the normative requirements for applications and installations of safety devices to protect static pressure equipment. The information contained in ISO 4126-9:2008 assumes single-phase flow of the fluid discharged from the safety device. ISO 4126-10 provides guidance specific to two-phase flow conditions. Equipment connected together in a system by piping of adequate capacity, which is free from potential blockages and does not contain any valve that can isolate any part, can be considered to be a safety system for the application of pressure relief. ISO 4126-9:2008 does not deal with other safety devices, such as safety related monitoring, control and regulation devices and other limiting devices allowed by some national regulations.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off

This European Standard specifies the basic design requirements for the selection of a gas explosion venting protective system. This European Standard, EN 14797 and EN 14460 form a series of three standards which are used together.
NOTE 1   These three standards together represent the concept of gas explosion venting.
NOTE 2   To avoid transfer of explosions to other communicating equipment one should also consider applying prEN 15089.
This European Standard is applicable to:
   vent sizing to protect against the internal pressure effects of a gas explosion;
   flame and pressure effects outside the enclosure;
   recoil forces;
   influence of vent ducts;
   influence of initial temperature and pressure.
This European Standard does not provide design and application rules against effects generated by detonation reactions or runaway exothermic reactions including decomposition in the gas phase.
This European Standard is not applicable to:
   fire risks arising either from materials processed, used or released by the equipment or from materials that make up equipment and buildings;
   design, construction and testing of explosion venting devices, which are used to achieve explosion venting );
   protection against overpressures caused by events such as overfilling, overpressurisation, fire engulfment, overheating etc.
NOTE 3   Protection by venting against dust and hybrid explosions is specified in EN 14491.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the basic design requirements for the selection of a gas explosion venting protective system. This European Standard, EN 14797 and EN 14460 form a series of three standards which are used together.
NOTE 1   These three standards together represent the concept of gas explosion venting.
NOTE 2   To avoid transfer of explosions to other communicating equipment one should also consider applying prEN 15089.
This European Standard is applicable to:
- vent sizing to protect against the internal pressure effects of a gas explosion;
- flame and pressure effects outside the enclosure;
- recoil forces;
- influence of vent ducts;
- influence of initial temperature and pressure.
This European Standard does not provide design and application rules against effects generated by detonation reactions or runaway exothermic reactions including decomposition in the gas phase.
This European Standard is not applicable to:
- fire risks arising either from materials processed, used or released by the equipment or from materials that make up equipment and buildings;
- design, construction and testing of explosion venting devices, which are used to achieve explosion venting );
- protection against overpressures caused by events such as overfilling, overpressurisation, fire engulfment, overheating etc.
NOTE 3   Protection by venting against dust and hybrid explosions is specified in EN 14491.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies requirements for design, manufacture and testing of safety devices to prevent over-pressurization. It does not specify where such safety devices are required, or the sizing of devices.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for the design, manufacture and testing of bursting disc safety devices for cryogenic service, i.e. for operation with cryogenic fluids below - 10 °C in addition to operation at ambient temperature. It is a requirement of this standard that the bursting disc safety device(s) comply with prEN ISO 4126-2. In the event of different requirements, this standard takes precedence over that standard.
This standard is restricted to bursting disc safety devices not exceeding a size of DN 100 designed to relieve single phase vapours or gases. A bursting disc assembly can be specified, constructed and tested such that it is suitable for  use with more than one gas or with mixtures of gases.
NOTE   This standard does not provide methods for determining the capacity of bursting disc safety devices for a particular cryogenic vessel. Such methods are provided in prEN 13648-3.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC - Request to implement normative comments from BSI after Formal Vote
2013: Originator of XML version: first setup pilot of CCMC in 2012

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for the design, manufacture and testing of bursting disc safety devices for cryogenic service, i.e. for operation with cryogenic fluids below - 10 °C in addition to operation at ambient temperature. It is a requirement of this standard that the bursting disc safety device(s) comply with prEN ISO 4126-2. In the event of different requirements, this standard takes precedence over that standard.
This standard is restricted to bursting disc safety devices not exceeding a size of DN 100 designed to relieve single phase vapours or gases. A bursting disc assembly can be specified, constructed and tested such that it is suitable for  use with more than one gas or with mixtures of gases.
NOTE   This standard does not provide methods for determining the capacity of bursting disc safety devices for a particular cryogenic vessel. Such methods are provided in prEN 13648-3.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part of this European Standard specifies the requirements for safeguards against excessive pressure in shell boilers
as defined in EN 12953-1.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Definition of the operative testing procedure to be applied for the determination of functional characteristics and exhaust capability of direct loaded and pilot operated safety valves and bursting discs working with compressible or uncompressible non-vaporizing fluids, under atmospheric and back pressure conditions (built up or superimposed).

  • Draft
    48 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    84 pages
    English language
    sale 15% off
  • Draft
    84 pages
    English language
    sale 15% off
  • Draft
    82 pages
    French language
    sale 15% off