iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

77.140.35 - Tool steels

ICS 77.140.35 Details

Tool steels

Werkzeugstahle

Aciers a outils

Orodna jekla

General Information

Parent
77.140 - Iron and steel products

e-Library Subscription

Create subscription and get permanent access to documents within 77.140.35 - Tool steels

Type
Monthly Subscription
for
seat
×
$ 113.59
$ 113.59

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
CEN
EN ISO 4957:2018(Main)
Tool steels (ISO 4957:2018)
SIST EN ISO 4957:2018

This document specifies requirements for the following grades of wrought tool steels:
a)    non-alloy cold-work tool steels;
b)    alloy cold-work tool steels;
c)    alloy hot-work tool steels;
d)    high-speed tool steels.
If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or cold-rolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1.
NOTE       Tables 2, 4, 6 and 8 cover only those steels which have gained certain international importance, which does not mean, however, that they are available in all industrial countries. In addition, a number of other steels for tools are specified in regional, national or company standards.
Where the heat resistance of the tools is of particular importance, as for example in the case of tools for hot forming glass, the material selection is based on ISO 4955.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4957:2018(Main)
Tool steels (ISO 4957:2018)
EN ISO 4957:2018

This document specifies requirements for the following grades of wrought tool steels:
a) non-alloy cold-work tool steels;
b) alloy cold-work tool steels;
c) alloy hot-work tool steels;
d) high-speed tool steels.
If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or coldrolled
products or products produced by powder metallurgy, which are supplied in one of the surface
and heat-treatment conditions given in 6.2 and Table 1.
NOTE Tables 2, 4, 6 and 8 cover only those steels which have gained certain international importance, which
does not mean, however, that they are available in all industrial countries. In addition, a number of other steels
for tools are specified in regional, national or company standards.
Where the heat resistance of the tools is of particular importance, as for example in the case of tools for
hot forming glass, the material selection is based on ISO 4955.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 4957:2018(Main)
Tool steels

This document specifies requirements for the following grades of wrought tool steels: a) non-alloy cold-work tool steels; b) alloy cold-work tool steels; c) alloy hot-work tool steels; d) high-speed tool steels. If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or cold-rolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1. NOTE Tables 2, 4, 6 and 8 cover only those steels which have gained certain international importance, which does not mean, however, that they are available in all industrial countries. In addition, a number of other steels for tools are specified in regional, national or company standards. Where the heat resistance of the tools is of particular importance, as for example in the case of tools for hot forming glass, the material selection is based on ISO 4955.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off
ISO
ISO 11054:2006(Main)
Cutting tools — Designation of high-speed steel groups

ISO 11054:2006 specifies the designation of groups of high-speed steels used for manufacturing high-speed steel (HSS) cutting tools such as taps, drills and end mills. It is not intended to specify the composition of high-speed steels, which is the subject of ISO 4957.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 5949:1983(Main)
Tool steels and bearing steels — Micrographic method for assessing the distribution of carbides using reference photomicrographs

Specifies a method for assessing steels with C levels between 0,1 % and 1,5 % and a total content of alloy elements less than or equal to 5 %. The use of this method for other steels shall be subject to special agreement. Contains principles, sampling, preparation of samples, assessment of the distribution of carbides, expression of results and test report. An annex gives reference photomicrographs.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
SIST
SIST EN ISO 4957:2000(Main)
Tool steels (ISO 4957:1999)
EN ISO 4957:1999

This international standard covers the grades of wrought tool steels listed in tables 2, 4, 6 and 8, namely: a) unalloyed cold-work tool steels (see table 2); b) alloyed cold-work tool steels (see table 4); c) alloyed hot-work tool steels (see table 6); d) high-speed steels (see table 8). If not stated in the following, this international standard applies to all types of hot-rolled, forged or cold-drawn products which are supplied in one of the surface and heat-treatment conditions given in 5.1.2 and table 1.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 4957:1999(Main)
Tool steels
  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off
SIST
SIST ISO 4957:1995(Main)
Tool steels
ISO 4957:1980
  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    20 pages
    French language
    sale 15% off
ISO
ISO 11054:1993(Main)
Cutting tools — Designation of high-speed steel groups

Specifies the designation of the groups HSS and HSS-E of high-speed steels used for manufacturing cutting tools such as taps, drills, etc. Is not intended to specify the composition of high-speed steels, which is stated in ISO 4957.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
ISO
ISO 4957:1980(Main)
Tool steels
SIST ISO 4957:1995
  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    20 pages
    French language
    sale 15% off
50