67.250 - Materials and articles in contact with foodstuffs
ICS 67.250 Details
Materials and articles in contact with foodstuffs
Bedarfsgegenstande
Matériaux et articles au contact des aliments
Materiali in predmeti v stiku z živili
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 67.250 - Materials and articles in contact with foodstuffs
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies a procedure to evaluate the passive behaviour of stainless steels and other passive alloys used in construction products intended to come into contact with drinking water.
The passive state is the reason why no relevant amounts of metals are released from such materials into the drinking water. This test is used to verify whether the alloy under consideration is passive under conditions which can occur in drinking waters.
This document is not applicable for product testing. It is only applicable for the assessment of passive behaviour of materials.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a procedure to evaluate the passive behaviour of stainless steels and other passive alloys used in products intended to come into contact with drinking water.
The passive state is the reason why no relevant amounts of metals are released from such materials into the drinking water. This test is used to verify whether the alloy under consideration is passive under conditions which can occur in drinking waters.
This document is not applicable for product testing. It is only applicable for the assessment of passive behaviour of materials.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods for measuring overall migration of plastic materials and articles intended to come into contact with foodstuffs by contacting test specimens with vegetable oils at temperatures greater than or equal to 4 °C and less than or equal to 175 °C.
NOTE Some vegetable oils are not suitable for use below 20 °C.
The overall migration from a sample of the plastics is determined as the loss in mass of non-volatile substances expressed:
- per unit surface area; or
- per kg of food simulant; or
- per article
after contact with a food simulant under defined conditions.
According to the type of materials or shape of articles, contact with the food simulant is carried out on a single surface (pouch, cell, filling) or by immersion.
This document does not cover the interpretation of the results which is expected to account for regulatory requirements.
- Standard38 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a simulating method of test for determination of the release of metal-ions from enamelled articles, which are intended to come into contact with food.
This document also specifies limits for the release of metal-ions from enamelled articles, which are intended to come into contact with food.
This document is applicable to enamelled articles, including tanks and vessels, which are intended to be used for the preparation, cooking, serving and storage of food.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods for measuring overall migration of plastic materials and articles intended to come into contact with foodstuffs by contacting test specimens with vegetable oils at temperatures greater than or equal to 4 °C and less than or equal to 175 °C. NOTE Some vegetable oils are not suitable for use below 20 °C. The overall migration from a sample of the plastics is determined as the loss in mass of non-volatile substances expressed: - per unit surface area; or - per kg of food simulant; or - per article after contact with a food simulant under defined conditions. According to the type of materials or shape of articles, contact with the food simulant is carried out on a single surface (pouch, cell, filling) or by immersion. This document does not cover the interpretation of the results which is expected to account for regulatory requirements.
- Standard38 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods for measuring overall migration of plastic materials and articles intended to come into contact with foodstuffs by contacting test specimens with evaporable food simulants at temperatures greater than or equal to 4 °C and not exceeding the reflux temperature. The overall migration from a sample of the plastics is determined as the loss in mass of non-volatile substances expressed: - per unit surface area; or - per kg of food simulant; or - per article after contact with a food simulant under defined conditions. According to the type of materials or shape of articles, contact with the food simulant is carried out on a single surface (pouch, cell, filling) or by immersion. This document does not cover the interpretation of the results which is expected to account for regulatory requirements.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods for measuring overall migration of plastic materials and articles intended to come into contact with foodstuffs by contacting test specimens with evaporable food simulants at temperatures greater than or equal to 4 °C and not exceeding the reflux temperature.
The overall migration from a sample of the plastics is determined as the loss in mass of non-volatile substances expressed:
- per unit surface area; or
- per kg of food simulant; or
- per article
after contact with a food simulant under defined conditions.
According to the type of materials or shape of articles, contact with the food simulant is carried out on a single surface (pouch, cell, filling) or by immersion.
This document does not cover the interpretation of the results which is expected to account for regulatory requirements.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the terms and definitions, basic requirements, technical requirements, test methods, test regulations, and packaging of industrial compostable plastic drinking straws.
- Standard8 pagesEnglish languagesale 15% off
This document specifies a procedure to determine the migration of substances from non-metallic and non-cementitious site-applied materials for use in contact with water intended for human consumption.
It is applicable to site-applied materials intended to be used under various conditions for the transport and storage of water intended for human consumption, including raw water used for the production of water intended for human consumption. It covers the extraction by water of substances from these materials after their application on site.
The document is applicable to materials whose physical or chemical properties alter during or after on-site application, such as coatings, paints, and adhesives. In addition, some site-applied materials that do not change in such a manner, e.g. greases or lubricants, are also included.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes a test method for laboratory evaluation of possible adverse effects of water treatment membrane elements and modules on drinking water quality.
In principle it is applicable to microfiltration, ultrafiltration, nanofiltration, reverse osmosis and electrodialysis modules for use in the treatment of public water supplies and of water inside buildings.
NOTE Such devices can vary considerably in design and operation and hence some modification of the procedures can be required.
Evaluation of the efficiency of the membrane filter in removing contaminants from the treated water is not included.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a simulating method of test for determination of the release of metal-ions from
enamelled articles, which are intended to come into contact with food.
This document also specifies limits for the release of metal-ions from enamelled articles, which are
intended to come into contact with food.
This document is applicable to enamelled articles, including tanks and vessels, which are intended to be
used for the preparation, cooking, serving and storage of food
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a simulating method of test for determination of the release of metal-ions from enamelled articles, which are intended to come into contact with food. This document also specifies limits for the release of metal-ions from enamelled articles, which are intended to come into contact with food. This document is applicable to enamelled articles, including tanks and vessels, which are intended to be used for the preparation, cooking, serving and storage of food.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document specifies a procedure to determine the migration of substances from non-metallic and non-cementitious site-applied materials for use in contact with water intended for human consumption.
It is applicable to site-applied materials intended to be used under various conditions for the transport and storage of water intended for human consumption, including raw water used for the production of water intended for human consumption. It covers the extraction by water of substances from these materials after their application on site.
The document is applicable to materials whose physical or chemical properties alter during or after on-site application, such as coatings, paints, and adhesives. In addition, some site-applied materials that do not change in such a manner, e.g. greases or lubricants, are also included.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft30 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard describes a test method for laboratory evaluation of possible adverse effects of water treatment membranes on drinking water quality.
In principle it is applicable to microfiltration, ultrafiltration, nanofiltration, reverse osmosis and electrodialysis modules for use in the treatment of public water supplies and of water inside buildings.
NOTE Such devices can vary considerably in design and operation and hence some modification of the procedures may be required.
Evaluation of the efficiency of the membrane filter in removing contaminants from the treated water is not included.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an analytical test method for the determination of anthraquinone (see Table 1) in water and 95 % ethanol extracts of pulp, paper and board materials and articles intended to come into contact with foodstuffs using a gas chromatograph coupled to a mass spectrometer (GC-MS). Moreover, acetone extracts of modified polyphenylene oxide (MPPO) that, according to EN 14338, can be used as a simulant to assess the possible transfer/migration of substances from paper and board into dry, non-fatty foodstuffs can be analysed with the method presented here.
This method can be applied to determine anthraquinone in concentrations ranging from 2 µg/l to 40 µg/l in the water and solvent extracts, corresponding to 0,05 mg/kg to 1 mg/kg pulp, paper and board or, respectively, 0,1 μg/dm2 to 2 μg/dm2 in the case of migration tests with MPPO. The measurement range can be lowered by enriching anthraquinone from the water and solvent extracts.
Table 1 - Anthraquinone
...
- Technical specification11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an analytical test method for the determination of anthraquinone (see Table 1) in water and 95 % ethanol extracts of pulp, paper and board materials and articles intended to come into contact with foodstuffs using a gas chromatograph coupled to a mass spectrometer (GC-MS). Moreover, acetone extracts of modified polyphenylene oxide (MPPO) that, according to EN 14338, can be used as a simulant to assess the possible transfer/migration of substances from paper and board into dry, non-fatty foodstuffs can be analysed with the method presented here.
This method can be applied to determine anthraquinone in concentrations ranging from 2 μg/l to 40 μg/l in the water and solvent extracts, corresponding to 0,05 mg/kg to 1 mg/kg pulp, paper and board or, respectively, 0,1 μg/dm2 to 2 μg/dm2 in the case of migration tests with MPPO. The measurement range can be lowered by enriching anthraquinone from the water and solvent extracts.
- Technical specification11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard describes a test procedure to identify performance characteristics and a weight rating of convection and steam ovens used on aircraft. Furthermore it describes the calculation procedure to determine an energy consumption index and a performance index. There is no direct correlation between the Eco efficiency and cooking performance in terms of food quality and appearance. The two index values represent the Eco efficiency.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard describes a test procedure to identify performance characteristics and a weight rating of a galley chilling equipment used on aircraft. Furthermore it describes the calculation procedure to determine an energy consumption index and a performance index. Only galley chilling equipment with a freeze function will be considered. The effect of the chilling equipment on food quality is not addressed in this standard.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines the test procedures and calculations to determine the ECO efficiency of the following catering equipment installed in an aircraft:
- Chilling equipment (with freeze function);
- Ovens (steam and convection ovens);
- Beverage makers (coffee maker, water heater).
Based on the results it will be possible to derive the energy consumption index and a performance index of the considered equipment type. The two index values represent the ECO efficiency.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard describes a test procedure to identify performance characteristics and a weight rating of beverage maker products used on aircraft. Furthermore it describes the calculation procedure to determine an energy consumption index and a performance index. The effect of the beverage makers on beverage quality is not addressed in this standard.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for the release of lead and cadmium from glass hollowware that is intended to be used in contact with food. This document is applicable to glass hollowware intended for use in the preparation, cooking, serving and storage of food and beverages, excluding glass ceramic ware and glass flatware. This document is also applicable to glass articles used for packaging in the food industry.
- Standard24 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
This document specifies a procedure to determine the migration of substances from ion exchange, adsorbent or hybrid resin materials for use in contact with water intended for human consumption.
Resins comprise synthetic organic macromolecular materials.
This standard is applicable to resins of the following types:
- ion exchange resins: used to modify the composition of water (e.g. softening by removal of calcium ions). They can be in either an anionic or cationic state;
- adsorbent resins: used to lower the concentration of undesirable substances (usually organic pollutants) from water. They are used in a neutral state;
- hybrid adsorbers: Organic polymer based ion exchange resin or adsorbent resin with incorporated inorganic (e.g. iron hydroxide) or second organic phase. Used to lower the concentration of undesirable substances (specific inorganic or organic pollutants) from water. They can be in either an anionic, cationic or neutral state.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for the release of lead and cadmium from ceramic ware, glass ceramic ware and glass dinnerware intended to be used in contact with food, but excluding vitreous and porcelain enamel articles (covered by ISO 4531). This document is applicable to ceramic ware, glass ceramic ware and glass dinnerware which is intended to be used for the preparation, cooking, serving and storage of food and beverages, excluding all articles used in food manufacturing industries or in which food is sold.
- Standard26 pagesEnglish languagesale 15% off
- Standard27 pagesFrench languagesale 15% off
This document describes procedures for the testing of dyed paper and board intended to come into contact with foodstuffs. Some procedures depending on the foreseeable use of the material are given.
Visual evaluation against a grey scale provides grading of the bleeding.
For samples having significant different sides, a migration can occur from one glass fibre to the other and could lead to wrong interpretation of the fastness of one side. It is advisable to check these samples using large sampling procedure to prevent cross contamination of the glass fibre during the migration procedure. The procedure is described in Annex A. If lower limit of detection is required, this procedure could also be used.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document is one in a series of Standards for the determination of heavy metals in an aqueous extract of paper or board intended for contact with food. This document specifies the test method for the determination of cadmium, lead and chromium in an aqueous extract.
It is applicable to paper and paperboard with extractable metal contents exceeding
- 0,1 mg per kg for cadmium,
- 0,6 mg per kg for lead,
- 0,25 mg per kg for chromium.
Metal content levels below those given can be measured by this document if very sensitive equipment is available and if all other laboratory conditions fulfil the requirements for trace element analysis.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes procedures for the testing of the fastness of fluorescent whitened paper and board intended to come into contact with foodstuffs. Some procedures depending on the foreseeable use of the material are given.
Visual absence of the glass fibre paper’s fluorescence under UV light is evaluated.
For samples having significant different sides, a migration can occur from one glass fibre to the other and could lead to wrong interpretation of the fastness of one side. It is advisable to check these samples using large sampling procedure to prevent cross contamination of the glass fibre during the migration procedure. The procedure is described in Annex A. If lower limit of detection is required, this procedure can also be used.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of transfer of antimicrobial constituents from paper and board materials and articles intended for food contact.
NOTE The need of using this Standard may be specified by the legislation regarding paper and board intended to come into contact with foodstuffs.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft20 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a procedure to determine the migration of substances from ion exchange, adsorbent or hybrid resin materials for use in contact with water intended for human consumption.
Resins comprise synthetic organic macromolecular materials.
This standard is applicable to resins of the following types:
- ion exchange resins: used to modify the composition of water (e.g. softening by removal of calcium ions). They can be in either an anionic or cationic state;
- adsorbent resins: used to lower the concentration of undesirable substances (usually organic pollutants) from water. They are used in a neutral state;
- hybrid adsorbers: Organic polymer based ion exchange resin or adsorbent resin with incorporated inorganic (e.g. iron hydroxide) or second organic phase. Used to lower the concentration of undesirable substances (specific inorganic or organic pollutants) from water. They can be in either an anionic, cationic or neutral state.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes procedures for the testing of the fastness of fluorescent whitened paper and board
intended to come into contact with foodstuffs. Some procedures depending on the foreseeable use of the material
are given.
Visual absence of the fluorescence under UV light will be evaluated.
NOTE: For samples having significant different sides, a migration can occur from one glass fibre to the other and
could lead to wrong interpretation of the fastness of one side. These samples should be checked using large
sampling procedure to prevent cross contamination of the glass fibre during the migration procedure. The
procedure is described in annexe A. If lower limit of detection is required, this procedure could also be used.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes procedures for the testing of dyed paper and board intended to come into contact with
foodstuffs. Some procedures depending on the foreseeable use of the material are given.
Visual evaluation against a grey scale provides grading of the bleeding.
NOTE: For samples having significant different sides, a migration can occur from one glass fibre to the other and
could lead to wrong interpretation of the fastness of one side. These samples should be checked using large
sampling procedure to prevent cross contamination of the glass fibre during the migration procedure. The
procedure is described in annexe A. If lower limit of detection is required, this procedure could also be used.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard is one in a series of Standards for the determination of heavy metals in an aqueous extract of paper or board intended for contact with food. This European Standard specifies the test method for the determination of cadmium, lead and chromium in an aqueous extract.
It is applicable to paper and paperboard with extractable metal contents exceeding:
- 0,02 mg per kg for cadmium;
- 0,15 mg per kg for lead;
- 0,05 mg per kg for chromium.
Metal content levels below those given can be measured by this European Standard if very sensitive equipment is available and if all other laboratory conditions fulfil the requirements for trace element analysis.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a method for the determination of transfer of antimicrobial constituents from paper and board materials and articles intended for food contact.
NOTE The need of using this Standard can be specified by the legislation regarding paper and board intended to come into contact with foodstuffs.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft20 pagesEnglish languagesale 10% offe-Library read for1 day
This part specifies requirements and test methods for ceramic knives
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 8442-9:2018 specifies material and performance requirements and test method of ceramic blades of knives intended for use in the preparation of food.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 8442-9:2018 specifies material and performance requirements and test method of ceramic blades of knives intended for use in the preparation of food.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This European Standard specifies a procedure for obtaining a migration water to determine odour and flavour for products made from organic materials intended to come in contact with water for human consumption (drinking water) and used in piping systems. Such products include pipes, fittings, ancillaries and coatings.
This standard is applicable to products to be used under various conditions for the transport, storage and distribution of water intended for human consumption and raw water used for the manufacture of water intended for human consumption.
This standard specifies a test method comprising of a set of procedures. The use may be dependent on the relevant national regulations and/or the system or product standards.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 18188:2016 specifies the general characteristics, requirements and methods for testing of polypropylene (PP) drinking straws (herein after called PP straws). It is applicable to PP straws having an inner diameter of 3 mm to 12 mm.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This European Standard describes a method for detecting and identifying organic chemicals that are amenable to GC-MS analysis using the procedures described and which can migrate from a product into water intended for human consumption. This European Standard does not provide all the necessary tools to completely identify all the substances that are detected. A method of semi-quantitatively estimating the concentrations of the organic substances detected is also provided, however, concentrations should only be seen as indicative.
NOTE The method to be used for the preparation of migration waters is specified by separate EN's, as noted below.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a method for determining the chlorine demand of organic materials intended for use in contact with drinking water.
This European Standard is applicable to factory made and site applied products used for the distribution, transport and storage of drinking water.
This European Standard does not cover the use of high levels of chlorine to disinfect products when they are put into service.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard describes a method for identifying organic chemicals that are amenable to GC-MS analysis using the procedures described and which may migrate from a product into water intended for human consumption. A method of semi-quantitatively estimating the concentrations of the organic substances identified is also provided.
NOTE The method to be used for the preparation of migration waters is specified by separate EN standards, as noted below.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a procedure to determine the migration of substances from factory-made or factory-applied products for use in contact with water intended for human consumption. Materials used to make such products include plastics, rubber and glassy (porcelain/vitreous enamel) materials.
This European Standard is applicable to products intended to be used under various conditions for the transport and storage of water intended for human consumption, including raw water used for the production of water intended for human consumption. It covers the extraction by water of substances from the finished products.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies procedures for determining the ability of non-metallic materials to promote the growth of microorganisms.
This standard is applicable to those materials destined to be used under various conditions for the transport and storage of water intended for human consumption.
The Standard allows for the testing of a single type of material, or a product in which only one material is in contact with water. It is unsuitable for use with assembled products where more than one material is exposed to water.
- Standard65 pagesEnglish languagesale 10% offe-Library read for1 day
EN 12873-1 specifies a procedure to determine the migration of substances from factory-made or factory-applied products for use in contact with water intended for human consumption. Materials used to make such products include plastics, rubber and glassy (porcelain/vitreous enamel) materials. This European Standard is applicable to products intended to be used under various conditions for the transport and storage of water intended for human consumption, including raw water used for the production of water intended for human consumption. It covers the extraction by water of substances from the finished products.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a method for the determination of phthalates in water, solvent and modified polyphenylene oxide (MPPO) extracts of paper and board materials and articles intended for food contact using gas chromatography coupled to mass spectrometry (GC-MS).
This method is applicable to the determination of phthalates in concentration ranging from 0,002 mg/L to 5 mg/L for water and solvent extracts and 0,0005 mg/dm² to 0,25 mg/dm² for MPPO migration depending on the individual substance and the value of the blank.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a procedure to determine the release of metals from metallic materials used in construction products intended to come into contact with drinking water ).
The test can be used for three purposes:
a) assess a material as a reference material for a category of materials using the results of several investigations in different waters covering a broad range of water compositions;
b) assess a material for approval by way of comparative testing;
c) obtain data on the interaction of local water with a material.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
EN 16453 specifies an analytical test method for the determination of phthalates in water, solvent and modified polyphenylene oxide (MPPO) extracts of paper and board materials and articles intended for food contact using gas chromatography coupled to mass spectrometry (GC-MS). This method is applicable to the determination of phthalates in concentration ranging from 0,002 mg/l to 5 mg/l for water and solvent extracts and 0,0005 mg/dm² to 0,25 mg/dm² for MPPO migration depending on the individual substance and the value of the blank.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 14285:2014 specifies limits for extractable chemical substances for single-use gloves made from natural rubber, synthetic rubber, or plastic materials that are intended for use in food preparation, food handling, and related application in food service industry. ISO 14285:2014 does not cover the specification for extractable biological substances and physical requirements of the gloves. It is not applicable to gloves used under extreme conditions such as those having pH less than 4,5 and/or temperature above 40 °C. It does not cover gloves being exposed to fat and oil foods.
- Standard18 pagesEnglish languagesale 15% off
This European Standard specifies a procedure to determine the release of metals from metallic materials used in construction products intended to come into contact with drinking water1). The test can be used for three purposes: a) assess a material as a reference material for a category of materials using the results of several investigations in different waters covering a broad range of water compositions; b) assess a material for approval by way of comparative testing; c) obtain data on the interaction of local water with a material.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard describes a test method to determine the amount of lead on the surface of test specimens made from lead containing copper alloys.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies a procedure to determine the release of nickel from nickel layers or a coating containing nickel on inner surfaces of products which are intended to come into contact with drinking water.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day