This standard specifies safety requirements and their verification for design and construction of self-propelled, mounted or semi-mounted vine shoot tipping machines. These mobile machines are used for trimming vineyard and other fruit tress that grow in the same way (trellising plants) and similar applications. Their cutting tools are either:
-   High speed rotative blades (which cut by impact), or
-   Rotative blade and counter blade (which cut by shearing), or
-   Reciprocating cutting bar (which cuts by shearing).
This standard does not apply to:
-   Tipping machines for free standing fruit bushes,
-   Walk-behind pedestrian controlled machines,
-   Machines intended to be mounted on walk-behind pedestrian controlled machines,
-   Hand-held machines.
NOTE 1   Machines intended to be mounted on walk-behind pedestrian controlled machines will be dealt with in the next revision of this standard.
This standard describes methods for the elimination or reduction of risks which need specific requirements for vine shoot tipping machines. It does not deal with general hazards, particularly general hazards related to mobility, including those specific to self-propelled machines. These aspects will be dealt with in another standard produced by CEN/TC 144 (see introduction).
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
The list of significant hazards dealt with in this standard is given in annex A. Annex A also indicates the hazards which have not been dealt with.
NOTE 2   This standard does not deal with:
-   the location and the operation of the controls;
-   the adaptability and the setting up of mounted machines on tractors or other vehicles.
Environmental aspects have not been considered in this standard.
This standard applies primarily to machines which are manufactured after the date of issue of the standard.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the technological test as regards mash pumps. Includes definitions, and gives an example of test report. Annex A shows a standard motor-pump-group. A grape transfer apparatur is given in annex B. The pressure regulating device is illustrated in annex C. Annex D includes a control form for mash pump quantitative test. The control form for qualitative test given in annex E. The control form for overall evaluation is show in annex F.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

Gives a foutth list of the most frequent terms (in English and French) used in the field of equipment for vine cultivation and wine making, together with their definitions.

  • Standard
    6 pages
    English language
    sale 15% off

Specifies technical test methods for machines designed for carrying out all operation involved in grape-harvesting. Applies in cases where the grapes are used for wine making or making other beverages Annex A gives the summary of test procedure. Various forms are given in the annexes as follows: machine description form (annex B); form for reporting test settings and condition (annex C); plot description form (annex D); worksite form (annex E); transport form (annex F); work quality form (annex G); evaluation of losses (annex H); sample determination form (annex I); vinification form -mechanical harvest (annex J); vinification form -manual harvest (annex K); general report form (annex L).

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off

Gives a third list fo the most frequent terms (in English and French) used in the field of equipment for vine cultivationand wine making, together with their definitions; some of the definitions are illustrated by drawings; the latter are given only for information.

  • Standard
    6 pages
    English language
    sale 15% off

Specifies technical test methods for grape presses; applies to continuous and discontinuous presses. Annex A contains an example of overall evaluation; annex B gives the inspection sheet for the press; the inspection sheet for the standard press is given in annex C; annex D includes the sketch of vat with non-mechanized emptying; the description of hydraulic press with diameter of 1200 mm is given in annex E.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off

Gives an initial list of the most frequent terms (in English and French) used in the field of equipment for vine cultivation and wine making, together with their definitions; some of the definitions are illustrated by drawings; the latter are given only for information.

  • Standard
    6 pages
    English language
    sale 15% off

This document specifies the safety requirements for the design of must and grape harvest pumps and the means for verifying these requirements and gives information for the safe use of the machines covered.
This document applies to must and grape harvest pumps, as defined in 3.1, intended for the transfer of fresh, de-stemmed grapes and pomace.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to grape harvest pumps, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, specified in Annex B.
This document does not deal with hazardous phenomena associated with the integration of grape harvest pumps with other machinery.
This document does not give additional requirements for operations subject to special rules (e.g. explosive atmosphere, power supply from electrical networks where the voltage, frequency and tolerance differ from those of the public network).
This document is not applicable to:
—   adaptations intended for other fruit harvests;
—   pumps for building materials (covered by EN 12001 [1]);
—   pumps on grape harvesters;
—   reception conquests;
—   machines upstream or downstream of the pump.
This document is not applicable to grape harvest pumps manufactured before the date of its publication.

  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the safety requirements for the design of must and grape harvest pumps and the means for verifying these requirements and gives information for the safe use of the machines covered.
This document applies to must and grape harvest pumps, as defined in 3.1, intended for the transfer of fresh, de-stemmed grapes and pomace.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to grape harvest pumps, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, specified in Annex B.
This document does not deal with hazardous phenomena associated with the integration of grape harvest pumps with other machinery.
This document does not give additional requirements for operations subject to special rules (e.g. explosive atmosphere, power supply from electrical networks where the voltage, frequency and tolerance differ from those of the public network).
This document is not applicable to:
—   adaptations intended for other fruit harvests;
—   pumps for building materials (covered by EN 12001 [1]);
—   pumps on grape harvesters;
—   reception conquests;
—   machines upstream or downstream of the pump.
This document is not applicable to grape harvest pumps manufactured before the date of its publication.

  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies safety requirements and their verification for design and construction of self-propelled, mounted or semi-mounted vine shoot tipping machines. These mobile machines are used for trimming vineyard and other fruit trees that grow in the same way (trellising plants) and similar applications. Their tools are either:  - high speed rotative blades (which cut by impact), or  - rotative blade and counter blade (which cut by shearing), or  - reciprocating cutting bar (which cuts by shearing).  This standard does not apply to:  - tipping machines for free standing fruit bushes,  - walk-behind pedestrian controlled machines,  - hand-held machines.  Note 1: Machines intended to be mounted on walk-behind pedestrian controlled machines will be dealt with in the next revision of this standard.  This standard describes methods for the elimination or reduction of risks which need specific requirements for vine shoot tipping machines. It does not deal with general hazards particularly general hazards related to mobility, including those specific to self-propelled machines. These aspects will be dealt with in another standard produced by CEN/TC 144 (see introduction).  In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.  The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.  Note 2:  This standard does not deal with:     - the location and the operation of the controls;    - the adaptability and the setting up of mounted machines on tractors   or other vehicles.  Environmental aspects have not been considered in this standard.  This standard applies primarily to machines which are manufactured after the date of issue of the standard.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies safety requirements and their verification for design and construction of self-propelled, mounted or semi-mounted vine shoot tipping machines. These mobile machines are used for trimming vineyard and other fruit trees that grow in the same way (trellising plants) and similar applications. Their tools are either:  - high speed rotative blades (which cut by impact), or  - rotative blade and counter blade (which cut by shearing), or  - reciprocating cutting bar (which cuts by shearing).  This standard does not apply to:  - tipping machines for free standing fruit bushes,  - walk-behind pedestrian controlled machines,  - hand-held machines.  Note 1: Machines intended to be mounted on walk-behind pedestrian controlled machines will be dealt with in the next revision of this standard.  This standard describes methods for the elimination or reduction of risks which need specific requirements for vine shoot tipping machines. It does not deal with general hazards particularly general hazards related to mobility, including those specific to self-propelled machines. These aspects will be dealt with in another standard produced by CEN/TC 144 (see introduction).  In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.  The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.  Note 2:  This standard does not deal with:     - the location and the operation of the controls;    - the adaptability and the setting up of mounted machines on tractors   or other vehicles.  Environmental aspects have not been considered in this standard.  This standard applies primarily to machines which are manufactured after the date of issue of the standard.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Gives a fifth list of the most frequent terms (in English and French) used in the field of equipment for vine cultivation and wine making, together with their definitions.

  • Standard
    12 pages
    English language
    sale 15% off

Gives a second list of the most frequent terms (in English and French) used in the field of equipment for vine cultivation and wine making, together with their definitions; some of the definitions are illustrated by drawings; the latter are given only for information.

  • Standard
    12 pages
    English language
    sale 15% off