13.080.40 - Hydrological properties of soils
ICS 13.080.40 Details
Hydrological properties of soils
Bodenuntersuchung auf hydrologische Eigenschaften
Propriétés hydrologiques des sols
Hidrološke lastnosti tal
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 13.080.40 - Hydrological properties of soils
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft4 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft4 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies laboratory methods for determination of the soil water-retention characteristic.
This document applies only to measurements of the drying or desorption curve.
Four methods are described to cover the complete range of soil water pressures as follows:
a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to −50 kPa;
b) method using a porous plate and burette apparatus for determination of matric pressures from 0 kPa to −20 kPa;
c) method using a pressurized gas and a pressure plate extractor for determination of matric pressures from −5 kPa to −1 500 kPa;
d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from −33 kPa to −1 500 kPa.
Guidelines are given to select the most suitable method in a particular case.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
This Standard specifies laboratory methods for determination of the soil water-retention characteristic. This document applies only to measurements of the drying or desorption curve. Four methods are described to cover the complete range of soil water pressures as follows: a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to -50 kPa; b) method using a porous plate and burette apparatus for determination of matric pressures from 0 kPa to -20 kPa; c) method using a pressurized gas and a pressure plate extractor for determination of matric pressures from -5 kPa to -1 500 kPa; d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from -33 kPa to -1 500 kPa. Guidelines are given to select the most suitable method in a particular case.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies laboratory methods for determination of the soil water-retention characteristic. This document applies only to measurements of the drying or desorption curve. Four methods are described to cover the complete range of soil water pressures as follows: a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to −50 kPa; b) method using a porous plate and burette apparatus for determination of matric pressures from 0 kPa to −20 kPa; c) method using a pressurized gas and a pressure plate extractor for determination of matric pressures from −5 kPa to −1 500 kPa; d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from −33 kPa to −1 500 kPa. Guidelines are given to select the most suitable method in a particular case.
- Standard23 pagesEnglish languagesale 15% off
- Standard25 pagesFrench languagesale 15% off
This document provides guidance on the principles behind, and main methods for, the evaluation of
sites, soils and soil materials in relation to their role as a source of contamination of groundwater and
their function in retaining, releasing and transforming contaminants. It is focused on contaminated
land management identifying and listing relevant monitoring strategies, methods for sampling, soil
processes and analytical methods.
- Standard48 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft53 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides guidance on the principles behind, and main methods for, the evaluation of sites, soils and soil materials in relation to their role as a source of contamination of groundwater and their function in retaining, releasing and transforming contaminants. It is focused on contaminated land management identifying and listing relevant monitoring strategies, methods for sampling, soil processes and analytical methods.
- Standard48 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft53 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides guidance on the principles behind, and main methods for, the evaluation of sites, soils and soil materials in relation to their role as a source of contamination of groundwater and their function in retaining, releasing and transforming contaminants. It is focused on contaminated land management identifying and listing relevant monitoring strategies, methods for sampling, soil processes and analytical methods.
- Standard41 pagesEnglish languagesale 15% off
- Standard42 pagesFrench languagesale 15% off
ISO 17892-1:2014 specifies a method of determining the water content of soils.
It is applicable to the laboratory determination of the water (also known as moisture) content of a soil test specimen by oven-drying within the scope of geotechnical investigations. The water content is required as a guide to the classification of natural soils and as a control criterion in re-compacted soils, and is measured on samples used for most field and laboratory tests. The oven-drying method is the definitive procedure used in usual laboratory practice.
The practical procedure for determining the water content of a soil is to determine the mass loss on drying the test specimen to a constant mass in a drying oven controlled at a given temperature. The mass loss is assumed to be due to free water and is referenced to the remaining dry mass of solid particles.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies a method for the gravimetric determination of soil water content as a volume fraction. The method is applicable to all types of non-swelling or non-shrinking soils where coring sleeves can be used for sampling. It is not applicable to soils where stones, tough roots or other factors prevent collection of soil cores. It is used as a reference method (e.g. the calibration of indirect methods for determination of water content). NOTE The determination of water content as a mass fraction is described in ISO 11465.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 11275:2004 specifies a laboratory method for the simultaneous determination in soils of the unsaturated hydraulic conductivity and of the soil water-retention characteristic. It is applicable only to measurement of the drying or desorption curve. Application of the method is restricted to soil samples which are, as far as possible, homogeneous. The method is not applicable to soils which shrink in the range of matric head 0 cm to -800 cm.
The range of the determination of the conductivity depends on the soil type. It lies between matric heads of approximately -50 cm and -700 cm.
The range of the determination of the water-retention characteristic lies between matric heads of approximately 0 cm and -800 cm.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
EN-ISO 11275 specifies a laboratory method for the simultaneous determination in soils of the unsaturated hydraulic conductivity and of the soil water-retention characteristic. It is applicable only to measurement of the drying or desorption curve. Application of the method is restricted to soil samples which are, as far as possible, homogeneous. The range of the determination of the conductivity depends on the soil type.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 11461 specifies a method for the gravimetric determination of soil water content as a volume fraction.The method is applicable to all types of non-swelling or non-shrinking soils where coring sleeves can be used for sampling. It is not applicable to soils where stones, tough roots or other factors prevent collection of soil cores. It is used as a reference method (e.g. the calibration of indirect methods for determination of water content).
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies a method for the gravimetric determination of soil water content as a volume fraction on the basis of the ratio of measured water content mass to known dry bulk density. This International Standard is applicable to all types of non-swelling or non-shrinking soils. It is used as a reference method (e.g. the calibration of indirect methods for determination of water content).
- Corrigendum1 pageEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies a method for the gravimetric determination of soil water content as a volume fraction on the basis of the ratio of measured water content mass to known dry bulk density. This International Standard is applicable to all types of non-swelling or non-shrinking soils. It is used as a reference method (e.g. the calibration of indirect methods for determination of water content).
- Corrigendum1 pageEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies the determination of the hydraulic conductivity of granular soils (e.g. sand and gravel) using a constant-head method involving a rigid-wall permeameter to measure the laminar flow of water. The procedure establishes representative values of the hydraulic conductivity of granular soils that can occur in natural deposits as placed in embankments, or when used as base courses under pavements. In order to limit consolidation influences during testing, this procedure is applicable only to disturbed granular soils containing not more than 10 % soil passing a 75-µm sieve. This procedure is applicable to the measurement of hydraulic conductivity of compacted samples of sands and gravels containing little or no silt, where flow along the rigid wall of the permeameter has no practical implications on the test results. This International Standard is not applicable to silt and clay, where seepage/flow at the boundaries is not acceptable.
- Standard11 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard12 pagesFrench languagesale 15% off
This International Standard specifies a method for the gravimetric determination of soil water content as a volume fraction on the basis of the ratio of measured water content mass to known dry bulk density. This International Standard is applicable to all types of non-swelling or non-shrinking soils. It is used as a reference method (e.g. the calibration of indirect methods for determination of water content).
- Standard7 pagesEnglish languagesale 15% off
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard7 pagesFrench languagesale 15% off
This International Standard specifies a test method for laboratory measurement of the hydraulic conductivity of water-saturated porous materials using a flexible wall permeameter. This International Standard is applicable to undisturbed or compacted specimens that have a hydraulic conductivity between 1 × 10-5 m/s (1 × 10-3 cm/s) and 1 × 10-11 m/s (1 × 10-9 cm/s). Typical soil types falling in this category are clay, clay and sand tills, silt, peat, mud, etc.
- Standard13 pagesEnglish languagesale 15% off
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard14 pagesFrench languagesale 15% off
This International Standard specifies a laboratory method for the simultaneous determination in soils of the unsaturated hydraulic conductivity and of the soil water-retention characteristic. It is applicable only to measurement of the drying or desorption curve. Application of the method is restricted to soil samples which are, as far as possible, homogeneous. The method is not applicable to soils which shrink in the range of matric head hm =-800cm. The range of the determination of the conductivity depends on the soil type. It lies between matric heads of approximately hm=-50 cm and hm =-700 cm. The range of the determination of the water-retention characteristic lies between matric heads of approximately hm =0 and hm =-800 cm.
- Standard11 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard11 pagesFrench languagesale 15% off
Specifies a non-destructive method for the determination of water content in the unsaturated zone of soils using a neutron depth probe. Water content profiles can be obtained by measuring at a series of depths of soil.
- Standard13 pagesEnglish languagesale 15% off
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesFrench languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
ISO 17312:2005 specifies the determination of the hydraulic conductivity of granular soils (e.g. sand and gravel) using a constant-head method involving a rigid-wall permeameter to measure the laminar flow of water. The procedure establishes representative values of the hydraulic conductivity of granular soils that can occur in natural deposits as placed in embankments, or when used as base courses under pavements. In order to limit consolidation influences during testing, this procedure is applicable only to disturbed granular soils containing not more than 10 % soil passing a 75-micrometre sieve. ISO 17312:2005 is applicable to the measurement of hydraulic conductivity of compacted samples of sands and gravels containing little or no silt, where flow along the rigid wall of the permeameter has no practical implications on the test results. ISO 17312:2005 is not applicable to silt and clay, where seepage/flow at the boundaries is not acceptable.
- Standard11 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard12 pagesFrench languagesale 15% off
ISO 17313:2004 specifies a test method for laboratory measurement of the hydraulic conductivity of water-saturated porous materials using a flexible wall permeameter. ISO 17313:2004 is applicable to undisturbed or compacted specimens that have a hydraulic conductivity between 1 x 10-5 m/s (1 x 10-3 cm/s) and 1 x 10-11 m/s (1 x 10-9 cm/s). Typical soil types falling in this category are clay, clay and sand tills, silt, peat, mud, etc.
- Standard13 pagesEnglish languagesale 15% off
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard14 pagesFrench languagesale 15% off
ISO 11275:2004 specifies a laboratory method for the simultaneous determination in soils of the unsaturated hydraulic conductivity and of the soil water-retention characteristic. It is applicable only to measurement of the drying or desorption curve. Application of the method is restricted to soil samples which are, as far as possible, homogeneous. The method is not applicable to soils which shrink in the range of matric head 0 cm to -800 cm. The range of the determination of the conductivity depends on the soil type. It lies between matric heads of approximately -50 cm and -700 cm. The range of the determination of the water-retention characteristic lies between matric heads of approximately 0 cm and -800 cm.
- Standard11 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard11 pagesFrench languagesale 15% off
ISO 16586:2003 specifies a method for the gravimetric determination of soil water content as a volume fraction on the basis of the ratio of measured water content mass to known dry bulk density. ISO 16586:2003 is applicable to all types of non-swelling or non-shrinking soils. It is used as a reference method (e.g. the calibration of indirect methods for determination of water content).
- Standard7 pagesEnglish languagesale 15% off
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard7 pagesFrench languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard6 pagesFrench languagesale 15% off
ISO 15709:2002 gives a simplified theory of the physics of soil water in the unsaturated zone and defines a set of terms, quantities, units and symbols used in the field of soil physics investigation of the unsaturated zone. ISO 15709:2002 is applicable only to standards on soil physical investigations of the unsaturated zone (including swelling soils) elaborated within ISO/TC 190. ISO 15709:2002 specifically excludes macropore flow.
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard6 pagesFrench languagesale 15% off
Describes methods for the determination of pore water pressure (point measurements) in unsaturated and saturated soil using tensiometers. Applicable for in situ measurements in the field and, e. g. soil cores, used in experimental examinations.
- Standard20 pagesEnglish languagesale 15% off
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard21 pagesFrench languagesale 15% off
- Standard21 pagesFrench languagesale 15% off
Specifies a non-destructive method for the determination of water content in the unsaturated zone of soils using a neutron depth probe. Water content profiles can be obtained by measuring at a series of depths of soil.
- Standard13 pagesEnglish languagesale 15% off
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesFrench languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
Describes methods for the determination of pore water pressure (point measurements) in unsaturated and saturated soil using tensiometers. Applicable for in situ measurements in the field and, e. g. soil cores, used in experimental examinations.
- Standard20 pagesEnglish languagesale 15% off
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard21 pagesFrench languagesale 15% off
- Standard21 pagesFrench languagesale 15% off
2010-07-09 EMA: ISO/CS confirmed that no text has been received, WI deleted following the 3-year timeframe exercise.
- Draft31 pagesEnglish languagesale 10% offe-Library read for1 day
2010-07-09 EMA: ISO/CS confirmed that no text has been received, WI deleted following the 3-year timeframe exercise.
- Draft32 pagesEnglish languagesale 10% offe-Library read for1 day
2010-07-09 EMA: ISO/CS confirmed that no text has been received, WI deleted following the 3-year timeframe exercise.
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies laboratory methods for determination of the soil water-retention characteristic. This International Standard applies only to measurements of the drying or desorption curve. Four methods are described to cover the complete range of soil water pressures as follows:
a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to - 50 kPa;
b) method using a porous plate and burette apparatus for determination of matric pressures from 0 kPa to - 20 kPa;
c) method using a pressurized gas and a pressure plate extractor for determination of matric pressures from - 5 kPa to - 1500 kPa;
d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from - 33 kPa to - 1500 kPa.
Guidelines are given to select the most suitable method in a particular case.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies laboratory methods for determination of the soil water-retention characteristic. This standard applies only to measurements of the drying or desorption curve. Four methods are described to cover the complete range of soil water pressures as follows: a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to -50 kPa; b) method using a porous plate and burette for determination of matric pressures from 0 kPa to -20 kPa; c) method using a pressurized gas and a pressure plate extractor for determination of matric pressure from -5 kPa to -1500 kPa; d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from -33 kPa to -1500 kPa. Guidelines are given to select the most suitable method in a particular case.
- Standard20 pagesEnglish languagesale 15% off
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard22 pagesFrench languagesale 15% off
EN-ISO 11274 specifies laboratory methods for determination of the soil water-retention characteristic. This International Standard applies only to measurements of the drying or desorption curve. Four methods are described to cover the complete range of soil water pressures as follows: a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to - 50 kPa; b) method using a porous plate and burette apparatus for determination of matric pressures from 0 kPa to - 20 kPa; c) method using a pressurized gas and a pressure plate extractor for determination of matric pressures from - 5 kPa to - 1500 kPa; d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from - 33 kPa to - 1500 kPa. Guidelines are given to select the most suitable method in a particular case.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies laboratory methods for determination of the soil water-retention characteristic. This International Standard applies only to measurements of the drying or desorption curve. Four methods are described to cover the complete range of soil water pressures as follows: a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to - 50 kPa; b) method using a porous plate and burette apparatus for determination of matric pressures from 0 kPa to - 20 kPa; c) method using a pressurized gas and a pressure plate extractor for determination of matric pressures from - 5 kPa to - 1500 kPa; d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from - 33 kPa to - 1500 kPa. Guidelines are given to select the most suitable method in a particular case.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard provides guidance on the principles behind, and main methods for, the evaluation of sites, soils, and soil materials in relation to their role as a source of contamination of groundwater and their function in transporting, degrading and transforming contaminants. It identifies and lists relevant monitoring strategies, methods for sampling, soil processing and analytical methods. This International Standard is applicable to the evaluation of the impact of contaminants on groundwater in relation to - drinking water quality, - irrigation water quality, - industrial use, - natural base flow.
- Standard58 pagesEnglish languagesale 15% off
- Standard62 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard62 pagesFrench languagesale 15% off
This International Standard provides guidance on the principles behind, and main methods for, the evaluation of sites, soils, and soil materials in relation to their role as a source of contamination of groundwater and their function in transporting, degrading and transforming contaminants. It identifies and lists relevant monitoring strategies, methods for sampling, soil processing and analytical methods. This International Standard is applicable to the evaluation of the impact of contaminants on groundwater in relation to drinking water quality, irrigation water quality, industrial use, natural base flow.
- Standard65 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 15175:2004 provides guidance on the principles behind, and main methods for, the evaluation of sites, soils, and soil materials in relation to their role as a source of contamination of groundwater and their function in transporting, degrading and transforming contaminants. It identifies and lists relevant monitoring strategies, methods for sampling, soil processing and analytical methods.
ISO 15175:2004 is applicable to the evaluation of the impact of contaminants on groundwater in relation to drinking water quality, irrigation water quality, industrial use and natural base flow.
- Standard65 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies laboratory methods for determination of the soil water-retention characteristic. This International Standard applies only to measurements of the drying or desorption curve. Four methods are described to cover the complete range of soil water pressures as follows:
a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to - 50 kPa;
b) method using a porous plate and burette apparatus for determination of matric pressures from 0 kPa to - 20 kPa;
c) method using a pressurized gas and a pressure plate extractor for determination of matric pressures from - 5 kPa to - 1500 kPa;
d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from - 33 kPa to - 1500 kPa.
Guidelines are given to select the most suitable method in a particular case.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 15175:2004 provides guidance on the principles behind, and main methods for, the evaluation of sites, soils, and soil materials in relation to their role as a source of contamination of groundwater and their function in transporting, degrading and transforming contaminants. It identifies and lists relevant monitoring strategies, methods for sampling, soil processing and analytical methods. ISO 15175:2004 is applicable to the evaluation of the impact of contaminants on groundwater in relation to drinking water quality, irrigation water quality, industrial use and natural base flow.
- Standard58 pagesEnglish languagesale 15% off
- Standard62 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard62 pagesFrench languagesale 15% off
Specifies laboratory methods for determination of the soil water-retention characteristic. This standard applies only to measurements of the drying or desorption curve. Four methods are described to cover the complete range of soil water pressures as follows: a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to -50 kPa; b) method using a porous plate and burette for determination of matric pressures from 0 kPa to -20 kPa; c) method using a pressurized gas and a pressure plate extractor for determination of matric pressure from -5 kPa to -1500 kPa; d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from -33 kPa to -1500 kPa. Guidelines are given to select the most suitable method in a particular case.
- Standard20 pagesEnglish languagesale 15% off
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard22 pagesFrench languagesale 15% off