This document specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of:
—    milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2);
—    machining centres; and
—    transfer machines (see 3.1.3)
designed for continuous production use, which are intended to cut cold metal and other non-combustible cold materials, except wood or materials with physical characteristics similar to those of wood as defined in ISO 19085‑1 and glass, stone and engineered/agglomerated materials as defined in EN 14618.
This document covers the following machines (referred to as "machines" in this document):
a)    manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1), e.g. knee and column type milling machines (see Figures C.1 and C.2);
b)    manually, with limited numerical control, operated boring and milling machines (see 3.2.2, Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4);
c)     numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see Figures C.5 to C.7);
d)    transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see Figures C.8 to C.13).
e)    machines fitted with the following devices/facilities, whose hazards have been dealt with:
—    tool magazine(s);
—    tool changer(s);
—    workpiece handling mechanism(s);
—    powered workpiece clamping mechanism(s);
—    swarf/chip conveyor(s);
—    power-operated door(s);
—    moveable operator cabin(s);
—    additional equipment for turning;
—    additional equipment for grinding.
This document deals with all significant hazards, hazardous situations and events relevant to this type of machinery which can occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.

  • Standard
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    151 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 19085 gives the safety requirements and measures for stationary four sided moulding machines with a maximum working width of 350 mm and a maximum speed of the integrated workpiece feed of 200 m/min, with electrical and/or electronic control system, hereinafter referred to as “machines” designed to cut solid wood and materials with similar physical characteristics to wood (see ISO 19085-1:2017, 3.2).
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling,
disabling and scrapping phases are taken into account.
NOTE: For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
It is also applicable to machines fitted with one or more of the following devices / additional working units, whose hazards have been dealt with:
- universal spindle;
- glass bead saw unit
- fixed or movable work-piece support;
- quick tool changing system
- laser marking unit
- automatic work-piece returner
- in-feed hopper
- in-feed loading table
This part of ISO 19085 does not deal with any hazards related to:
a) in-feed devices other than in-feed hopper and in-feed loading table (magazines, etc.);
NOTE: For mechanical in-feed devices which also prevent access to the in-feed opening, see 6.6.4.
b) out-feed devices (e.g. mechanical handling systems) except for hazards related to ejection from the machine due to climb cutting
c) single machine being used in combination with any other machine (as part of a line);
It is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to its publication.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with all significant hazards, hazardous situations and events which are relevant to:
-   bridge sawing machines;
-   bridge sawing and milling machines;
-   numerical control bridge sawing/milling machines.
These machines are designed to saw and mill natural stone and engineered/agglomerated stone as defined by EN 14618:2009, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals with the foreseeable lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document also applies to machines fitted with the following facilities/devices:
-   mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
-   automatic tool change;
-   loading and unloading conveyor system;
-   tilting and/or rotating head axis;
-   rotating workpiece support(s);
-   tilting workpiece support(s) when loading;
-   lathe unit;
-   undercut grooving unit;
-   axes operating in accordance with an NC work programme.
This document does not apply to:
-   machines intended for operation in a potentially explosive atmosphere;
-   machines operating in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
-   machines intended for outdoor operation;
-   machines which are manufactured before the date of their publication as EN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with all significant hazards, hazardous situations and events which are relevant to:
-   bridge sawing machines;
-   bridge sawing and milling machines;
-   numerical control bridge sawing/milling machines.
These machines are designed to saw and mill natural stone and engineered/agglomerated stone as defined by EN 14618:2009, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals with the foreseeable lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document also applies to machines fitted with the following facilities/devices:
-   mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
-   automatic tool change;
-   loading and unloading conveyor system;
-   tilting and/or rotating head axis;
-   rotating workpiece support(s);
-   tilting workpiece support(s) when loading;
-   lathe unit;
-   undercut grooving unit;
-   axes operating in accordance with an NC work programme.
This document does not apply to:
-   machines intended for operation in a potentially explosive atmosphere;
-   machines operating in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
-   machines intended for outdoor operation;
-   machines which are manufactured before the date of their publication as EN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies, with reference to the ISO 230 series, some families of tests for accessory spindle heads used on machining centres or numerically controlled milling machines, etc., where applicable, with horizontal spindle (i.e. horizontal Z-axis). The tests considered in this document are also applicable to manual indexing heads. This document establishes the tolerances or maximum acceptable values for the test results corresponding to general purpose and normal accuracy spindle heads used on different types of machines. This document specifies several sets of procedures for geometric tests which can be carried out on different types of spindle heads for comparison, acceptance, maintenance, adjustments or any other purpose. Grinding heads and facing heads are not included in the scope of this document. This document deals only with the verification of geometric and positioning accuracy of the accessory spindle heads and does not apply to: — the testing of the machine's head(s) operation (e.g. vibration, abnormal sound noise level, stick slip motion of components); — the machine's spindle head(s) characteristics (e.g. speeds, feeds and accelerations) which are generally checked separately; or — the verification of the machining capability under power. Tests concerning the accuracy of finished test pieces are dealt with in other ISO standards.

  • Standard
    44 pages
    English language
    sale 15% off
  • Standard
    45 pages
    French language
    sale 15% off

IEC 62149-10:2018 covers the performance specification for radio-over-fibre (RoF) transceivers used for mobile fronthaul systems. The performance standard contains a definition of the product performance requirements together with a series of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run on a one-off basis to prove any product's ability to satisfy the performance standard's requirements. A product that has been shown to meet all the requirements of a performance standard can be declared to be in compliance with the performance standard.
Keywords: radio-over-fibre (RoF) transceivers used for mobile fronthaul systems

  • Standard
    36 pages
    English and French language
    sale 15% off

SIST EN 62841-2-17 applies to hand-held routers intended for cutting slots into or shaping the edge of wood and analogous materials, plastics and non-ferrous metals except magnesium.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 3070-2:2016 specifies, with reference to ISO 230‑1, ISO 230‑7 and ISO 230‑2, geometric tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of horizontal spindle boring and milling machines having a movable column along the X-axis and also specifies the applicable tolerances corresponding to general-purpose, normal accuracy machines. This type of machines are usually provided with sliding boring spindles and can be provided with universal spindle heads of the following types, whose test conditions are covered by ISO 17543‑1: - fixed or indexable heads, with accessory spindle(s) square to the Z-axis, with or without one spindle parallel to the Z-axis; - 45° split indexable heads, with mechanical indexing of the different angular positions of the two bodies (e.g. Hirth couplings); - 45° split continuous heads, provided with continuous positioning of the two numerically controlled axes; - swivel heads, with two numerically controlled rotary axes perpendicular to each other. Test conditions for accessory facing heads are specified in Annex B. ISO 3070-2:2016 concerns machines having movement of the column on the bed (X-axis), vertical movement of the spindle head on the column (Y-axis), axial movement of the ram (Z-axis), axial movement of the boring spindle (W-axis), and, in most cases, one or more tables moving on a bed parallel to the spindle (R-axis) and rotating around a vertical axis (B-axis). ISO 3070-2:2016 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

  • Standard
    53 pages
    English language
    sale 15% off
  • Standard
    53 pages
    English language
    sale 15% off
  • Standard
    55 pages
    French language
    sale 15% off

IEC/TS 62758:2012(E) presents a standard method to estimate the performance of a pulsed electro-acoustic (PEA) measurement system. For this purpose, a systematic procedure is recommended for the calibration of the measurement system. Using the procedure, users can estimate whether the system works properly or not.

  • Technical specification
    35 pages
    English language
    sale 15% off

This clause of part 1 is applicable except as follows:
1.1 Addition:
This European Standard applies to transportable single spindle vertical moulders, with a maximum cutter block diameter of 200 mm maximum, designed to cut wood and analogue materials also covered with plastic laminate or edgings by hand-feed operation. Single spindle vertical moulders other than transportable are covered by EN 848-1:1998.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applies to transportable single spindle vertical moulders with a maximum cutter block diameter of 180 mm.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 8636-2:2007 specifies, with reference to ISO 230-1, ISO 230-2, and ISO 230-7, geometric tests, machining tests, and tests for checking accuracy and repeatability of positioning of numerically controlled axes for general-purpose normal accuracy bridge-type milling machines with a travelling bridge (gantry-type). ISO 8636-2:2007 also specifies the applicable tolerances corresponding to the above-mentioned tests. ISO 8636-2:2007 is applicable to machines with travelling bridge and fixed table. It does not include single-column (open sided) machines and those with fixed bridge and moving tables. ISO 8636-2:2007 deals only with the verification of the accuracy of the machine. It does not apply to the testing of the machine operation (vibration, abnormal noise, stick-slip motion of components, etc.) nor to machine characteristics (such as speeds, feeds, etc.), which should generally be checked before testing the accuracy. ISO 8636-2:2007 provides the terminology used for the principal components of the machines and the designation of the axes with reference to ISO 841.

  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    38 pages
    French language
    sale 15% off

ISO 3070-3:2007 specifies, with reference to ISO 230-1 and ISO 230-2, geometric tests, machining tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movable column and movable table. ISO 3070‑3:2007 also specifies the applicable tolerances corresponding to these tests. ISO 3070-3:2007 concerns machines having movement of the column or column saddle on the bed (X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and, possibly, a feed movement of radial facing slide in the facing head (U-axis). Some machines also have an intermediate saddle with slideway between column and bed to achieve additional movement of the column parallel to the spindle axis (W-axis). ISO 3070-3:2007 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

  • Standard
    53 pages
    English language
    sale 15% off
  • Standard
    53 pages
    French language
    sale 15% off

ISO 3070-1-1:2007 specifies, with reference to ISO 230-1 and ISO 230-2, geometric tests, machining tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a fixed column and movable table. ISO 3070-1:2007 also specifies the applicable tolerances corresponding to these tests. ISO 3070-1:2007 concerns machines having have both longitudinal (Z axis) and transverse (X axis) movement of the table, a vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (W axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis), and that may include a rotary or indexing table. ISO 3070-1:2007 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

  • Standard
    51 pages
    English language
    sale 15% off
  • Standard
    51 pages
    French language
    sale 15% off

ISO 1701-1:2004 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, horizontal-spindle milling machines with table of variable height. It also specifies the applicable tolerances corresponding to the above-mentioned tests. ISO 1701-1:2004 deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine (vibration, abnormal noise, stick-slip motion of components, etc.), nor to machine characteristics (such as speeds, feeds, etc.), as such checks are generally carried out before testing the accuracy.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off

ISO 1701-2:2004 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, vertical-spindle milling machines with table of variable height. It also specifies the applicable tolerances corresponding to the above-mentioned tests. ISO 1701-2:2004 deals only with the verification of accuracy of the machine, and it does not apply to the testing of the running of the machine (vibration, abnormal noise, stick-slip motion of components, etc.) or to machine characteristics (such as speeds, feeds, etc.), which should generally be carried out before testing the accuracy.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    22 pages
    French language
    sale 15% off

Specifies geometrical tests and practical tests with reference to ISO 230-1 and also kinematic tests (accuracy of the transmission of motion). Also gives the terminology used for the main elements of the machine.

  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off

Applies to transportable single spindle vertical moulders with a maximum cutter block diameter of 180 mm.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the technical safety requirements and protective measures to be adopted by persons undertaking the
design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance)
of machines for cold working of metal with geometrically-defined cutting edge tools (milling).
This international standard takes account of intended use, including reasonably foreseeable misuse, maintenance, cleaning,
and setting operations. It specifies access conditions to operators positions and manual load/unload stations. It presumes
accessibility to the machine from all directions. It describes means to reduce risks to operators and other exposed persons.
This standard includes the following machines but is not limited to these:
a) Milling machines including machines capable of performing boring operations,
b) Numerical controlled milling machines, milling- and machining centres,
c) Transfer and special purpose machines,
which are designed to process only a pre-specified metal or analogous material workpiece, or limited family of similar
workpieces by means of a predetermined sequence of machining operations and process parameters.
This international standard also applies to workpiece transfer devices including transport devices for loading/unloading
when they form an integral part of the machine.
This international standard deals with significant hazards relevant to milling machines when they are used as intended and
under the conditions foreseen by the manufacturer (see clause 4).
Hazards arising from other metal working processes (e.g. grinding, turning, friction welding, forming, EDM, laser
processing) are covered by other standards (see Bibliography).
This international standard applies to machines which are manufactured after its date of publication.

  • Standard
    162 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 16090-1:2017 specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2), machining centres and transfer machines which are intended to cut cold metal, and other non-combustible cold materials except for wood or materials with physical characteristics similar to those of wood as defined in ISO 19085‑1, and for glass, stone and engineered/agglomerated materials as defined in EN 14618.
ISO 16090-1:2017 covers the following machines:
a)    manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1), e.g. knee and column type milling machines (see Figures C.1 and C.2);
b)    manually, with limited numerical control, operated boring and milling machines (see 3.2.2, Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4);
c)    numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see Figures C.5, C.6 and C.7);
d)    transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see Figures C.8, C.9, C.10, C.11, C.12 and C.13).
ISO 16090-1:2017 also applies to machines fitted with the following devices/facilities:
-      tool magazine(s);
-      tool changer(s);
-      workpiece handling mechanism(s);
-      powered workpiece clamping mechanism(s);
-      swarf/chip conveyor(s);
-      power-operated door(s);
-      additional equipment for turning;
-      additional equipment for grinding.
When in this document the sole word "machine" or "machines" is being used, it is referred to all above-mentioned groups and types of machines.
ISO 16090-1:2017 deals with all significant hazards, hazardous situations and events relevant to this type of machinery which may occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
ISO 16090-1:2017 presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.

  • Standard
    162 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard applies to routers and trimmers.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with all significant hazards, hazardous situations and events, as listed in Clause 4, which are relevant to bridge type machines: sawing, sawing and milling, milling, included numerical control (NC/CNC) versions, designed to saw and mill natural stone and engineered/agglomerated stone as defined by EN 14618:2009, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard deals with the foreseeable lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This European Standard also applies to machines fitted with the following facilities/devices:
—   mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
—   automatic tool change;
—   loading and unloading conveyor system;
—   tilting and/or rotating head axis;
—   rotating workpiece support(s);
—   tilting workpiece support(s) when loading;
—   lathe unit;
—   undercut grooving unit;
—   axes operating in accordance with an NC work programme.
This European Standard does not apply to:
—   machines intended for operation in a potentially explosive atmosphere;
—   machines operating in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
—   machines intended for outdoor operation;
—   machines which are manufactured before the date of its publication as EN.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard deals with all significant hazards, hazardous situations and events, as listed in Clause 4, which are relevant to bridge type machines: sawing, sawing and milling, milling, included numerical control (NC/CNC) versions, designed to saw and mill natural stone and engineered/agglomerated stone as defined by EN 14618:2009, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard deals with the foreseeable lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This European Standard also applies to machines fitted with the following facilities/devices:
—   mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
—   automatic tool change;
—   loading and unloading conveyor system;
—   tilting and/or rotating head axis;
—   rotating workpiece support(s);
—   tilting workpiece support(s) when loading;
—   lathe unit;
—   undercut grooving unit;
—   axes operating in accordance with an NC work programme.
This European Standard does not apply to:
—   machines intended for operation in a potentially explosive atmosphere;
—   machines operating in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
—   machines intended for outdoor operation;
—   machines which are manufactured before the date of its publication as EN.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2010-02-01 EMA: Consultants assigned following e-mail from PM received on 2010-02-01.
TC - Corrections in:
- Subclause 7.3 and Annex C of the E reference version;
- Subclauses 5.2 and 7.3 of the F reference version;
- Subclause 5.2 and Annex C of the D reference version.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5).
Machines covered by this standard include but are not limited to:
- knee and column type milling machines (see figures C.1, C.2);
- bed-type milling machines (see figure C.3);
- multi-spindle milling machines (see figures C.4 and C.5);
- plano-milling machines (see figures C.4 and C.5);
- profile and contouring milling machines (see figure C.6),
- milling and boring machines (see figure C.7).
1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations.  It presumes access to the machine from all directions.  It describes means to reduce risks to operators and other exposed persons.
1.3 This standard also applies to workpiece transfer devices when they form an integral part of the machine.
1.4 This standard deals with significant hazards relevant to milling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography).
1.6 Milling machines with automatic tool changing capabilities are not covered by this standard (see
prEN 12417:1996).
1.7 This standard is not applicable to milling machines which were manufactured before the date of publication by CEN of this standard.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Amandma A11:2007 je dodatek k standardu SIST EN 60745-2-17:2003
Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for routers and trimmers. The rated voltage being not more than 250 V for single-phase a.c. or d.c. and 440 V for three-phase a.c. tools.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for routers and trimmers. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c.tools.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2010-02-01 EMA: Consultants assigned following e-mail from PM received on 2010-02-01.
TC - Corrections in:
- Subclause 7.3 and Annex C of the E reference version;
- Subclauses 5.2 and 7.3 of the F reference version;
- Subclause 5.2 and Annex C of the D reference version.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5).
Machines covered by this standard include but are not limited to:
-   knee and column type milling machines (see figures C.1, C.2);
-   bed-type milling machines (see figure C.3);
-   multi-spindle milling machines (see figures C.4 and C.5);
-   plano-milling machines (see figures C.4 and C.5);
-   profile and contouring milling machines (see figure C.6),
-   milling and boring machines (see figure C.7).
1.2   This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations.  It presumes access to the machine from all directions.  It describes means to reduce risks to operators and other exposed persons.
1.3   This standard also applies to workpiece transfer devices when they form an integral part of the machine.
1.4   This standard deals with significant hazards relevant to milling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).
1.5   Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography).
1.6   Milling machines with automatic tool changing capabilities are not covered by this standard (see
prEN 12417:1996).
1.7   This standard is not applicable to milling machines which were manufactured before the date of publication by CEN of this standard.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Amendment of Table 4, 5.2, 1.1.6.4 - Mode 3.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.4).  Machines covered by this standard include but are not limited to: knee and column type milling machines see figures C.1, C.2); bedtype mill ing machines (see figure C.3);...

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Amendment of Table 4, 5.2, 1.1.6.4 - Mode 3.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.4).  Machines covered by this standard include but are not limited to: knee and column type milling machines see figures C.1, C.2); bedtype mill ing machines (see figure C.3);...

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 3070-2:2007 specifies, with reference to ISO 230-1 and ISO 230-2, geometric tests, machining tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movable column and fixed table. ISO 3070‑2:2007 also specifies the applicable tolerances corresponding to these tests. ISO 3070-2:2007 concerns machines having movement of the column or column saddle on the bed (X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and, possibly, a feed movement of radial facing slide in the facing head (U-axis). Some machines also have an intermediate saddle with slideway between column and bed to achieve additional movement of the column parallel to the spindle axis (W-axis). ISO 3070-2:2007 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

  • Standard
    53 pages
    English language
    sale 15% off
  • Standard
    54 pages
    French language
    sale 15% off

Supersedes HD 400.3R S1 * Superseded by EN 60745-2-17:2003

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Supersedes HD 400.3O S1 * Superseded by EN 60745-2-17:2003

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Applies to transportable single spindle vertical moulders with a maximum cutter block diameter of 180 mm.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day