SIST EN 16836-3:2017
(Main)Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3: Energy profile specification dedicated application layer
Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3: Energy profile specification dedicated application layer
This European Standard specifies the application layer of a communication protocol for the exchange of data from metering devices to other devices within a mesh network. This European Standard makes reference to a number of documents whereby core requirements are specified. This referencing is in compliance with the Bridge Consortium and additionally the Memorandum of Understanding between the ZigBee Alliance and CEN/CENELEC.
The EN 16836 series represents a feature subset of a larger standard and as such not all of the features specified in the referenced documents are specified in this standard, due to some features being outside the scope of CEN/TC 294. Where this is the case the out of scope feature has either been omitted or specified as excluded.
Kommunikationssysteme für Zähler - Drahtloses Mesh-Netzwerk für den Zählerdatenaustausch - Teil 3: Energie-Profilspezifikation der speziellen Anwendungsschicht
Diese Europäische Norm legt die Anwendungsschicht eines Kommunikationsprotokolls für den Datenaustausch zwischen Zählern und anderen Geräten in einem Mesh Netzwerk fest. Diese Europäische Norm verweist auf eine Reihe von Dokumenten, in denen Kernanforderungen festgelegt sind. Diese Verweisung steht in Übereinstimmung mit dem Bridge Consortium sowie der Absichtserklärung zwischen der ZigBee Alliance und CEN/CENELEC.
Die Normenreihe EN 16836 stellt eine Teilmenge von Merkmalen eines umfassenderen Standards dar; da einige Merkmale außerhalb des Anwendungsbereichs von CEN/TC 294 liegen, sind daher nicht alle in den entsprechenden Dokumenten festgelegten Merkmale auch in dieser Norm festgelegt. Wo dies der Fall ist, wurde das entsprechende Merkmal entweder weggelassen oder als ausgeschlossen gekennzeichnet.
Systèmes de communication des compteurs - Réseau maillé sans fil pour l’échange de données de compteurs - Partie 3 : Spécifications de la couche application spéciale <profil énergie>
La présente Norme européenne spécifie la couche d’application d'un protocole de communication pour l'échange de données entre des dispositifs de comptage et d'autres dispositifs dans un réseau maillé. La présente norme fait référence à un certain nombre de documents dans lesquels sont spécifiées les exigences essentielles. La référence à ces documents est conforme à la procédure « lien avec les consortiums » (Consortium Bridge) ainsi qu'au protocole d'accord (MoU) entre l'Alliance ZigBee et le CEN/CENELEC.
La série EN XXXX représente un sous-ensemble de caractéristiques d'une norme plus étendue. De ce fait, les caractéristiques spécifiées dans les documents de référence ne sont pas toutes mentionnées dans la présente norme car certaines d'entre elles ne relèvent pas du domaine d'application du CEN/TC 294. Si c'est le cas, la caractéristique ne relevant pas du domaine d'application est soit omise, soit mentionnée comme exclue.
Komunikacijski sistemi za merilnike - Brezžična zankasta omrežja za izmenjavo podatkov merilnikov - 3. del: Specifikacija energijskega profila namenske aplikacijske plasti
Ta evropski standard določa aplikacijsko plast komunikacijskega protokola za izmenjavo podatkov od merilnih do drugih naprav znotraj zankastega omrežja. Ta evropski standard se sklicuje na številne dokumente, v katerih so določene glavne zahteve. To sklicevanje je skladno z združenjem Bridge Consortium in z Memorandumom o razumevanju med združenjem ZigBee Alliance in CEN/CENELEC.
Skupina standardov EN 16836 je podskupina večjega standarda, tako da vse funkcije, ki so opredeljene v sklicevanih dokumentih, niso opredeljene v tem standardu, saj nekatere ne spadajo na področje uporabe standarda CEN/TC 294. V teh primerih je funkcija, ki ne spada na področje uporabe standarda, izpuščena ali označena kot izključena.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QDPHQVNHKommunikationssysteme für Zähler - Drahtloses Mesh-Netzwerk für den Zählerdatenaustausch - Teil 3: Energie-Profilspezifikation der speziellen AnwendungsschichtSystèmes de communication des compteurs - Réseau maillé sans fil pour l’échange de données de compteurs - Partie 3 : Spécifications de la couche application spéciale Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3: Energy profile specification dedicated application layer35.100.70Uporabniški slojApplication layer33.200Daljinsko krmiljenje, daljinske meritve (telemetrija)Telecontrol. TelemeteringICS:Ta slovenski standard je istoveten z:EN 16836-3:2016SIST EN 16836-3:2017en,fr,de01-januar-2017SIST EN 16836-3:2017SLOVENSKI
STANDARD
SIST EN 16836-3:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16836-3
November
t r s x ICS
u uä t r râ
u wä s r rä y r English Version
Communication systems for meters æ Wireless mesh networking for meter data exchange æ Part
uã Energy profile specification dedicated application layer Systèmes de communication des compteurs æ Réseau maillé sans fil pour l 5échange de données de compteurs æ Partie
u ã Spécifications de la couche application spéciale
´profil énergie µ
Kommunikationssysteme für Zähler æ Drahtloses MeshæNetzwerk für den Zählerdatenaustausch æ Teil
uã EnergieæProfilspezifikation der speziellen Anwendungsschicht This European Standard was approved by CEN on
u September
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x z u xæ uã t r s x ESIST EN 16836-3:2017
EN 16836-3:2016 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Requirements . 5 4.1 General . 5 4.2 Cluster library . 6 Table 1 — Reference to ZigBee Cluster Library – 07–5123 Rev 04 . 6 4.3 Smart energy profile . 7 Table 2 — ZigBee Smart Energy Profile Specification 07–5356 Rev 19 Reference . 7 4.4 Over the air upgrade . 16
SIST EN 16836-3:2017
EN 16836-3:2016 (E) 3 European foreword This document (EN 16836-3:2016) has been prepared by Technical Committee CEN/TC 294 “Communication systems for meters”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be withdrawn at the latest by May 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENby the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16836-3:2017
EN 16836-3:2016 (E) 4 Introduction The EN 16836 series of standards details requirements for gas meters, water meters and heat meters that can interoperate with products in a mesh network that conform to this standard through a smart energy profile application layer. This standard refers to documents made freely available by the ZigBee Alliance, an organization which manages a mesh network specification (see www.zigbee.org/about/centc294). This series of standards specifies how a mesh networking radio specification applies within the scope of European standards at the application layer, networking layer and also medium access control/physical layer (MAC/PHY). EN 16836 consists of the following parts: — EN 16836-1, Communication systems for meters — Wireless mesh networking for meter data exchange — Part 1: Introduction and standardization framework — EN 16836-2, Communication systems for meters — Wireless mesh networking for meter data exchange — Part 2: Networking layer and stack specification — EN 16836-3, Communication systems for meters — Wireless mesh networking for meter data exchange — Part 3: Energy profile specification dedicated application layer This standard series is created in compliance with the terms of a memorandum of understanding (MOU) between CEN/CELELEC and the ZigBee Alliance. The principles underpinning the relationship between CEN/CENELEC and the ZigBee Alliance are described in the Consortium Bridge procedure. A copy of the MOU and the Consortium Bridge can be obtained from CEN/CENELEC. NOTE The term 'ZigBee' and the ZigBee Logo are registered trademarks of the ZigBee Alliance and their use is subject to the conditions of membership. SIST EN 16836-3:2017
EN 16836-3:2016 (E) 5 1 Scope This European Standard specifies requirements for the dedicated application layer of a communication protocol for the exchange of data from metering devices to other devices within a mesh network. This standard makes reference to a number of documents whereby core requirements are specified. This referencing is in compliance with the Bridge Consortium and additionally the Memorandum of Understanding between the ZigBee Alliance and CEN/CENELEC. The EN 16836 series represents a feature subset of a larger standard and as such not all of the features specified in the referenced documents are specified in this standard, due to some features being outside the scope of CEN/TC 294. Where this is the case the out of scope feature has either been omitted or specified as excluded. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 16836-1:2016, Communication systems for meters and remote reading of meters — Wireless mesh networking for meter data exchange — Part 1: Introduction and standardization framework ZigBee Cluster Library – 07-5123 Rev 04, April 26, 2010 ZigBee Smart Energy Standard 07-5356 Rev 19, December 3, 2014 OTA Cluster Specification 09-5264 Rev 23, March 12, 2014 NOTE The above ZigBee documents and OTA Cluster Specification can be obtained from can be obtained from www.zigbee.org/about/centc294. 3 Terms and definitions For the purposes of this document, the terms, definitions, acronyms and abbreviations given in — ZigBee Cluster Library – 07-5123 Rev 04, — ZigBee Smart Energy Standard 07-5356 Rev 19, and — OTA Cluster Specification 09-5264 Rev 23 apply. 4 Requirements 4.1 General The dedicated application layer shall be defined in this standard using the references specified in Tables 1 and 2. This energy profile shall conform to the general framework given in EN 16836-1:2016, the network layer given in EN 16836-1:2016, and the
requirements given in 4.2, 4.3, 4.4. SIST EN 16836-3:2017
EN 16836-3:2016 (E) 6 4.2 Cluster library The requirements given in Table 1 are the basic requirements for this part of EN 16836 and are detailed in the ZigBee Cluster Library – 07-5123 Rev 04. Table 1 — Reference to ZigBee Cluster Library – 07–5123 Rev 04 Reference Title 1.1 Scope and Purpose 1.2 Acronyms and Abbreviations 1.3 Definitions 1.4 Conformance Levels 1.5 References 2.2 Cluster Library Overview 2.2.1 Client/Server Model 2.2.2 Functional Domains 2.2.2.1 General 2.2.2.5 Measurement and Sensing 2.2.2.7 Protocol Interfaces 2.3 Command Frame Formats 2.4 General Command Frames 2.5 Addressing, Types and Enumerations 2.6 Functional Description 3 General Specification 3.2 Basic Cluster 3.3 Power Configuration Cluster 3.5 Identify Cluster 3.6 Groups Cluster 3.8 On/Off Cluster 3.11 Alarms Cluster 3.12 Time Cluster 3.13 RSSI Location Cluster 3.15 Commissioning Cluster 4.5 Pressure Measurement Cluster 4.6 Flow Measurement Cluster 4.7 Relative Humidity Measurement Cluster 9.2 Generic Tunnel cluster SIST EN 16836-3:2017
EN 16836-3:2016 (E) 7 4.3 Smart energy profile Table 2 — ZigBee Smart Energy Standard 07–5356 Rev 19 Reference Reference Title 1 Introduction 1.1 Scope 1.2 Purpose 1.3 Provisional Features 2 References 2.1 References 2.1.2 External Reference Documents 3 Definitions 3.1 Conformance Levels 3.2 ZigBee Definitions 3.3 Smart Energy Definitions 4 Acronyms and Abbreviations 5 Chapter 5 Profile Description 5.1 5.1 A ZigBee Smart Energy Network 5.2 5.2 ZigBee Stack Profile 5.2.1 MAC Data Polling (NMLE_Requests) 5.2.2 Application Level Queries 5.2.3 ZigBee Coordinator
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.