Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification

This European Standard specifies the characteristics of agglomerated cork with a wear layer based on polyvinyl chloride and modifications thereof.
To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Elastische Bodenbeläge - Platten auf einem Rücken aus Presskork mit einer Polyvinylchlorid-Nutzschicht - Spezifikation

Diese Europäische Norm legt die Eigenschaften von Presskork mit einer Nutzschicht aus Polyvinylchlorid und dessen Modifikationen fest.
Um den Verbraucher bei seiner Auswahl zu unterstützen, enthält diese Norm ein Klassifizierungssystem (siehe EN 685) auf Basis der Nutzungsintensität, das zeigt, wo für diese Bodenbeläge ein zufriedenstellender Nutzen möglich wäre. Die Norm legt auch die Anforderungen zur Kennzeichnung fest.

Revêtements de sol résilients - Dalles d'aggloméré de liège avec couche d'usure à base de polychlorure de vinyle - Spécifications

La présente Norme européenne spécifie les caractéristiques d'agglomérés de liège avec une couche d'usure à
base de polychlorure de vinyle et ses modifications.
Pour aider le consommateur à faire un choix éclairé, la Norme européenne inclut un système de classification (voir
l'EN 685) basé sur l'intensité d'utilisation, qui indique l'endroit où il convient que ces revêtements de sol rendent un
service satisfaisant. Elle spécifie également les exigences relatives au marquage.

Netekstilne talne obloge - Plošče iz stiskanega plutinega hrbtišča s polivinilkloridno uporabno vrhnjo plastjo - Specifikacija

Ta evropski standard določa značilnosti stiskane plute z uporabno vrhnjo plastjo na osnovi polivinil klorida in njegovih modifikacij.
Da bi ta evropski standard potrošnike spodbujal k sprejemanju utemeljenih odločitev, vsebuje klasifikacijski sistem (glej EN 685), temelječ na intenzivnosti uporabe, ki kaže, kje bi se te talne obloge lahko zadovoljivo uporabljale. Prav tako določa zahteve za označevanje.

General Information

Status
Published
Public Enquiry End Date
24-Nov-2010
Publication Date
11-Jul-2011
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Jun-2011
Due Date
21-Aug-2011
Completion Date
12-Jul-2011

Relations

Buy Standard

Standard
EN 655:2011
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 655:2010
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 655:2011
01-september-2011
1DGRPHãþD
SIST EN 655:1999
1HWHNVWLOQHWDOQHREORJH3ORãþHL]VWLVNDQHJDSOXWLQHJDKUEWLãþDV
SROLYLQLONORULGQRXSRUDEQRYUKQMRSODVWMR6SHFLILNDFLMD
Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride
wear layer - Specification
Elastische Bodenbeläge - Platten auf einem Rücken aus Presskork mit einer
Polyvinylchlorid-Nutzschicht - Spezifikation
Revêtements de sol résilients - Dalles d'aggloméré de liège avec couche d'usure à base
de polychlorure de vinyle - Spécifications
Ta slovenski standard je istoveten z: EN 655:2011
ICS:
97.150 Netekstilne talne obloge Non-textile floor coverings
SIST EN 655:2011 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 655:2011

---------------------- Page: 2 ----------------------

SIST EN 655:2011


EUROPEAN STANDARD
EN 655

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2011
ICS 97.150 Supersedes EN 655:1996
English Version
Resilient floor coverings - Tiles of agglomerated composition
cork with polyvinyl chloride wear layer - Specification
Revêtements de sol résilients - Dalles d'aggloméré de liège Elastische Bodenbeläge - Platten auf einem Rücken aus
avec couche d'usure à base de polychlorure de vinyle - Presskork mit einer Polyvinylchlorid-Nutzschicht -
Spécifications Spezifikation
This European Standard was approved by CEN on 10 March 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 655:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 655:2011
EN 655:2011 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Requirements .5
4.1 General requirements .5
4.2 Classification requirements .5
4.2.1 Wear group classification .5
4.2.2 Level of use classification .5
5 Marking .9
Annex A (informative) Optional properties . 10
Annex B (informative) Additional methods of test . 11
Bibliography . 12

2

---------------------- Page: 4 ----------------------

SIST EN 655:2011
EN 655:2011 (E)
Foreword
This document (EN 655:2011) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and
laminate floor coverings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 655:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 655:2011
EN 655:2011 (E)
1 Scope
This European Standard specifies the characteristics of agglomerated cork with a wear layer based on
polyvinyl chloride and modifications thereof.
To encourage the consumer to make an informed choice, the European Standard includes a classification
system (see EN 685) based on intensity of use, which shows where these floor coverings should give
satisfactory service. It also specifies requirements for marking.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 424, Resilient floor coverings — Determination of the effect of the simulated movement of a furniture leg
EN 425, Resilient and laminate floor coverings — Castor chair test
EN 427, Resilient floor coverings — Determination of the side length, squareness and straightness of tiles
EN 428, Resilient floor coverings — Determination of overall thickness
EN 429, Resilient floor coverings — Determination of the thickness of layers
EN 430, Resilient floor coverings — Determination of mass per unit area
EN 431, Resilient floor coverings — Determination of peel resistance
EN 433, Resilient floor coverings — Determination of residual indentation after static loading
EN 434, Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
EN 436, Resilient floor coverings — Determination of density
EN 660-2, Resilient floor coverings — Determination of wear resistance — Part 2: Frick-Taber test
EN 68
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elastische Bodenbeläge - Platten auf einem Rücken aus Presskork mit einer Polyvinylchlorid-Nutzschicht - SpezifikationRevêtements de sol résilients - Dalles d'aggloméré de liège avec couche d'usure à base de polychlorure de vinyle - SpécificationsResilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification97.150Netekstilne talne oblogeNon-textile floor coveringsICS:Ta slovenski standard je istoveten z:FprEN 655kSIST FprEN 655:2010en,de01-november-2010kSIST FprEN 655:2010SLOVENSKI
STANDARD



kSIST FprEN 655:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 655
September 2010 ICS 97.150 Will supersede EN 655:1996English Version
Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification
Revêtements de sol résilients -Dalles d'aggloméré de liège avec couche d'usure à base de polychlorure de vinyle - Spécifications
Elastische Bodenbeläge - Platten auf einem Rücken aus Presskork mit einer Polyvinylchlorid-Nutzschicht - Spezifikation This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 134.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 655:2010: EkSIST FprEN 655:2010



FprEN 655:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Requirements .54.1 General requirements .54.2 Classification requirements .54.2.1 Wear group classification .54.2.2 Level of use classification .55 Marking .9Annex A (informative)
Optional properties . 10Annex B (informative)
Additional methods of test . 11Bibliography . 12 kSIST FprEN 655:2010



FprEN 655:2010 (E) 3 Foreword This document (FprEN 655:2010) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 655:1996. kSIST FprEN 655:2010



FprEN 655:2010 (E) 4 1 Scope This European Standard specifies the characteristics of agglomerated cork with a wear layer based on polyvinyl chloride and modifications thereof. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 424, Resilient floor coverings — Determination of the effect of the simulated movement of a furniture leg
EN 425, Resilient and laminate floor coverings — Castor chair test EN 427, Resilient floor coverings — Determination of the side length, squareness and straightness of tiles
EN 428, Resilient floor coverings — Determination of overall thickness EN 429, Resilient floor coverings — Determination of the thickness of layers EN 430, Resilient floor coverings — Determination of mass per unit area EN 431, Resilient floor coverings — Determination of peel resistance EN 433, Resilient floor coverings — Determination of residual indentation after static loading EN 434, Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat EN 436, Resilient floor coverings — Determination of density EN 660-2, Resilient floor coverings — Determination of wear r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.