Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015)

This International Standard specifies performance requirements for protective clothing made from flexible
materials, which are designed to protect the wearer’s body, except the hands, from heat and/or flame. For
protection of the wearer’s head and feet, the only items of protective clothing falling within the scope of this
International Standard are gaiters, hoods and overboots. However, concerning hoods, requirements for visors
and respiratory equipment are not given.
The performance requirements set out in this International Standard are applicable to protective clothing which
could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread
properties and where the user can be exposed to radiant or convective or contact heat or to molten metal
splashes
This International Standard is not applicable to protective clothing that is specified by other International
Standards (see introduction).

Schutzkleidung - Kleidung zum Schutz gegen Hitze und Flammen (ISO 11612:2015)

Diese Internationale Norm legt die Leistungsanforderungen an Schutzkleidung fest, die aus flexiblen Materialien besteht und zum Schutz des Körpers, mit Ausnahme der Hände, des Trägers gegen Hitze und/oder Flammen vorgesehen ist. Zum Schutz von Kopf und Füßen des Trägers sind als Schutzkleidung nur Gamaschen, Hauben und Überschuhe im Anwendungsbereich dieser Internationalen Norm enthalten. In Bezug auf Hauben werden jedoch keine Anforderungen an Sichtscheiben und Atemgeräte gegeben.
Die Leistungsanforderungen nach dieser Internationalen Norm gelten für Schutzkleidung, die für einen weiten Bereich von Endanwendungen vorgesehen sind, bei denen Kleidung mit begrenzter Flammenausbreitung erforderlich ist und bei denen der Träger Strahlungswärme, konvektiver oder Kontaktwärme oder Spritzern geschmolzenen Metalls ausgesetzt ist.
Diese Internationale Norm gilt nicht für Schutzkleidung, die in anderen Internationalen Normen festgelegt ist (siehe Einleitung).

Vêtements de protection - Vêtements de protection contre la chaleur et les flammes - Exigences de performance minimales (ISO 11612:2015)

L'ISO 11612:2015 spécifie les exigences de performance relatives aux vêtements de protection fabriqués avec des matériaux souples, conçus pour protéger le corps de l'utilisateur, sauf les mains, contre la chaleur et/ou les flammes. Pour la protection de la tête et des pieds, les seuls articles d'habillement de protection relevant du domaine d'application de l'ISO 11612:2015 sont les guêtres, les cagoules et les couvre-chaussures. Toutefois, en ce qui concerne les cagoules, aucune exigence n'est donnée pour les visières et les appareils respiratoires.
Les exigences de performance fournies dans l'ISO 11612:2015 sont applicables aux vêtements de protection qui pourraient être portés pour un large éventail d'utilisations finales, où il existe un besoin de vêtements offrant des propriétés de propagation de flamme limitée et où le porteur peut être exposé à une chaleur émise par rayonnement, par convection ou par contact ou à des projections/éclaboussures de métal en fusion.

Varovalna obleka - Obleka za varovanje pred toploto in plamenom - Minimalne zahtevane lastnosti (ISO 11612:2015)

Ta mednarodni standard določa zahtevane lastnosti za varovalne obleke, izdelane iz prožnih materialov, ki so namenjene zaščiti telesa uporabnika, razen rok, pred vročino in/ali ognjem. Edina varovalna obleka za zaščito uporabnikove glave in stopal, ki sodijo v področje uporabe tega mednarodnega standarda, so gamaše, kapuce in prevleke za obutev. Vendar pa za kapuce niso podane zahteve za vizirje in dihalno opremo. Zahtevane lastnosti, določene v tem mednarodnem standardu, veljajo za varovalne obleke, ki bi jih lahko nosili za širok nabor končnih uporabnikov, kjer obstaja potreba za obleke z omejenimi zmožnostmi širjenja plamenov in kjer je uporabnik lahko izpostavljen toplotnemu sevanju, konvekcijski ali kontaktni toploti ali pljuskom raztopljene kovine. Ta mednarodni standard ne velja za varovalne obleke, ki so opredeljene z drugimi mednarodnimi standardi (glej uvod).

General Information

Status
Published
Public Enquiry End Date
29-Jan-2015
Publication Date
04-Aug-2015
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
23-Jul-2015
Due Date
27-Sep-2015
Completion Date
05-Aug-2015

Relations

Buy Standard

Standard
EN ISO 11612:2015
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11612:2015
01-september-2015
1DGRPHãþD
SIST EN ISO 11612:2009
Varovalna obleka - Obleka za varovanje pred toploto in plamenom - Minimalne
zahtevane lastnosti (ISO 11612:2015)
Protective clothing - Clothing to protect against heat and flame - Minimum performance
requirements (ISO 11612:2015)
Schutzkleidung - Kleidung zum Schutz gegen Hitze und Flammen (ISO 11612:2015)
Vêtements de protection - Vêtements de protection contre la chaleur et les flammes -
Exigences de performance minimales (ISO 11612:2015)
Ta slovenski standard je istoveten z: EN ISO 11612:2015
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN ISO 11612:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11612:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 11612:2015

EUROPEAN STANDARD
EN ISO 11612

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2015
ICS 13.340.10 Supersedes EN ISO 11612:2008
English Version
Protective clothing - Clothing to protect against heat and flame -
Minimum performance requirements (ISO 11612:2015)
Vêtements de protection - Vêtements de protection contre Schutzkleidung - Kleidung zum Schutz gegen Hitze und
la chaleur et les flammes - Exigences de performance Flammen (ISO 11612:2015)
minimales (ISO 11612:2015)
This European Standard was approved by CEN on 14 May 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11612:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11612:2015
EN ISO 11612:2015 (E)
Contents Page
European foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11612:2015
EN ISO 11612:2015 (E)
European foreword
This document (EN ISO 11612:2015) has been prepared by Technical Committee CEN/TC 162 “Protective
clothing including hand and arm protection and lifejackets", the secretariat of which is held by DIN, in
collaboration with Technical Committee ISO/TC 94 "Personal safety -- Protective clothing and equipment".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at
the latest by January 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11612:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11612:2015 has been approved by CEN as EN ISO 11612:2015 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 11612:2015
EN ISO 11612:2015 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 89/686/EEC on the approximation of the laws of the Member States relating to
personal protective equipment.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this International Standard given in Table ZA.1 confers, within the limits of the scope of this International
Standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and
associated EFTA regulations.
Table ZA.1 — Correspondence between this International Standard and Directive 89/686/EEC
Clause(s)/sub-clause(s) of this Essential requirements (ERs) of EU Qualifying
International Standard Directive 89/686/EEC, Annex II remarks/Notes
4.2.2., 4.2.3., 4.3, 4.4, 4.5, 6.2, 6.4, 1.2.1  Absence of risks and other ‘inherent'
and 6.6 nuisance factors.
4.2.2. 1.3.1  Adaptation of PPE to user morphology.
5.2, Clause 8, Clause 9 1.4  Information supplied by manufacturer.
5.3. 2.4  PPE subject to ageing
5.2.1, 6.3,7.2, 7.3, 7.4, 7.5, and 7.6 3.6.1  Protection against heat and/or fire. PPE
constituent materials and other components.
7.2, 7.3, 7.4, 7.5, and 7.6 3.6.2  Protection against heat and/or fire.
Complete PPE ready for use.
6.5 1.3.2  Lightness and design strength.
Clause 8 2.12  PPE bearing one or more identification or
recognition marks directly or indirectly relating to
health and safety.

WARNING: Other requirements and other EU Directives may be applicable to the products falling
within the scope of this standard.
4

---------------------- Page: 6 ----------------------

SIST EN ISO 11612:2015
INTERNATIONAL ISO
STANDARD 11612
Third edition
2015-07-01
Protective clothing — Clothing to
protect against heat and flame —
Minimum performance requirements
Vêtements de protection — Vêtements de protection contre la chaleur
et les flammes — Exigences de performance minimales
Reference number
ISO 11612:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST EN ISO 11612:2015
ISO 11612:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 11612:2015
ISO 11612:2015(E)

Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 General and design requirements . 4
4.1 General . 4
4.2 Size designation and fit . 5
4.2.1 General. 5
4.2.2 Protective clothing . 5
4.2.3 Additional protective garments . 5
4.3 Pockets and closures . 5
4.4 Hardware . 5
4.5 Additional design requirements for molten splash protective garments . 6
5 Sampling and pre-treatment . 6
5.1 Sampling . 6
5.2 Pre-treatment . 6
5.2.1 Pre-treatment by cleaning . 6
5.2.2 Mechanical pre-treatment . 7
5.3 Ageing . 7
5.4 Conditioning . 7
6 General performance requirements . 7
6.1 General . 7
6.2 Heat resistance . 7
6.2.1 Heat resistance at a temperature of (180 ± 5) °C . 7
6.2.2 Optional requirement — Heat resistance at a temperature of (260 ± 5) °C . 8
6.3 Limited flame spread . 8
6.3.1 General. 8
6.3.2 Testing in accordance with ISO 15025, Procedure A (code letter A1) . 8
6.3.3 Testing in accordance with ISO 15025, Procedure B (code letter A2) . 9
6.4 Dimensional change of textile materials .10
6.5 Physical requirements .10
6.5.1 Tensile strength .10
6.5.2 Tear strength .10
6.5.3 Burst strength for knitted materials and seams .10
6.5.4 Seam strength .10
6.6 Fat content of leather .10
7 Heat transmission performance requirements .11
7.1 General .11
7.2 Convective heat (code letter B) .11
7.3 Radiant heat (code letter C) .11
7.4 Molten aluminium splash (code letter D) .11
7.5 Molten iron splash (code letter E) .12
7.6 Contact heat (code letter F) .12
8 Summary of flame and heat transmission tests and corresponding letter codes (see
Table 8) .13
9 Optional test — Whole garment test against fire exposure on thermal manikin .13
10 Marking .13
11 Information supplied by the manufacturer .14
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 11612:2015
ISO 11612:2015(E)

Annex A (normative) Mechanical pre-treatment for metallized materials .15
Annex B (normative) Determination of property values for rating and classification .17
Annex C (informative) Guidelines for clothing design .18
Annex D (informative) Risk assessment .19
Annex E (normative) Uncertainty of measurement .20
Bibliography .21
iv © ISO 2015 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 11612:2015
ISO 11612:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword — Supplementary information.
The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and
equipment, Subcommittee SC 13, and by Technical Committee CEN/TC 162, Protective clothing including
hand and arm protection and lifejackets in collaboration.
This third edition cancels and replaces the second edition (ISO 11612:2008), of which it constitutes a
minor revision with the following changes:
— modify clause in design requirements regarding garment overlaps;
— modify clause in design requirements regarding the areas of the body covered by protective suits;
— modify clause on sampling requirements;
— modify clause for ageing due to washing (maximum number of cleaning procedures as indicated by
the manufacturer);
— modify pre-treatment clause to include requirements for single-use garments;
— include new requirement for measuring property value for rating and classification;
— modify requirement for optional heat resistance testing at 260 °C;
— remove reference to melting from flame spread requirements;
— modify afterflame requirement for flame spread;
— modify afterglow requirement for flame spread;
— modify requirement that hardware is tested only after pre-treatment;
— include statement for flame spread testing in regard to interlining materials;
— modify test procedure for the flame testing of labels, badges, and retro-reflective materials;
— modify requirements for tear strength;
© ISO 2015 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 11612:2015
ISO 11612:2015(E)

— specify test area for burst strength testing;
— modify innocuousness clause to include reference to ISO 13688;
— specify limit for Chromium(VI) Content;
— include new table for summary of tests;
— modify clause for information to be supplied by the manufacturer;
— include new Annex for measuring property value for rating and classification;
— update observation clause in Annex C, prediction of burn injury using an instrumented manikin;
— include new definition for uncertainty of measurement, Annex E.
vi © ISO 2015 – All rights reserved

---------------------- Page: 12 ----------------------

SIST EN ISO 11612:2015
ISO 11612:2015(E)

Introduction
The purpose of this International Standard is to provide minimum performance requirements for
clothing to protect against heat and flame, which could be worn for a wide range of end uses. All the
other standards listed in this Introduction deal also with clothing to protect against heat and flame, but
rather for quite specific products or end uses.
Within many of the hazards listed in this International Standard there are three performance levels:
— Level 1 to indicate exposure to low risk;
— Level 2 to indicate exposure to medium risk;
— Level 3 to indicate exposure to high risk.
For protection against extreme exposures to radiant heat, there is a fourth performance level to take
into account, high performance materials such as aluminized and similar materials. The level of personal
protection to be provided is based on the outcome of the risk assessment and some comments on risk
assessment are given in Annex D.
For complete protection against exposure to heat and/or flame, it is probable that it will be necessary
to protect the head, face, hands, and/or feet with suitable Personal Protective Equipment (PPE) and in
some cases, appropriate respiratory protection might also be considered necessary.
[[[1]]]
Attention is drawn to ISO/TR 2801:2007 , which sets out guidelines for selection, use, care, and
maintenance of protective clothing against heat and flame.
Nothing in this International Standard is intended to restrict any jurisdiction, purchaser, or manufacturer
from exceeding these minimum requirements. It is one of several standards for clothing that have been
developed to protect persons against heat and/or flames. Other standards include:
— ISO 11611, Protective clothing for use in welding and allied processes;
— ISO 11613, Protective clothing for firefighters — Laboratory test methods and performance
requirements;
— ISO 14460, Protective clothing for automobile racing drivers — Protection against heat and flame —
Performance requirements and test methods;
— ISO 15384, Protective clothing for firefighters — Laboratory test methods and performance
requirements for wildland firefighting clothing;
— ISO 15538, Protective clothing for firefighters — Laboratory test methods and performance
requirements for protective clothing with a reflective outer surface;
— EN 469, Protective clothing for firefighters — Performance requirements for protective clothing for
firefighting;
— EN 1486, Protective clothing for fire-fighters — Test methods and requirements for reflective clothing
for specialized fire fighting;
— EN 13911, Protective clothing for firefighters — Requirements and test methods for fire hoods for
firefighters;
— EN 15614, Protective clothing for firefighters — Laboratory test methods and performance requirements
for wildland clothing.
© ISO 2015 – All rights reserved vii

---------------------- Page: 13 ----------------------

SIST EN ISO 11612:2015

---------------------- Page: 14 ----------------------

SIST EN ISO 11612:2015
INTERNATIONAL STANDARD ISO 11612:2015(E)
Protective clothing — Clothing to protect against heat and
flame — Minimum performance requirements
1 Scope
This International Standard specifies performance requirements for protective clothing made from
flexible materials, which are designed to protect the wearer’s body, except the hands, from heat and/or
flame. For protection of the wearer’s head and feet, the only items of protective clothing falling within
the scope of this International Standard are gaiters, hoods, and overboots. However, concerning hoods,
requirements for visors and respiratory equipment are not given.
The performance requirements set out in this International Standard are applicable to protective
clothing which could be worn for a wide range of end uses, where there is a need for clothing with
limited flame spread properties and where the user can be exposed to radiant or convective or contact
heat or to molten metal splashes.
This International Standard is not applicable to protective clothing that is specified by other International
Standards (see Introduction).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 3376:2011, Leather — Physical and mechanical tests — Determination of tensile strength and
percentage extension
ISO 3377-1, Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge
tear
ISO 4048, Leather — Chemical tests — Determination of matter soluble in dichloromethane and free fatty
acid content
ISO 5077, Textiles — Determination of dimensional change in washing and drying
ISO 6942, Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials
and material assemblies when exposed to a source of radiant heat
ISO 9151, Protective clothing against heat and flame — Determination of heat transmission on exposure to
flame
ISO 9185, Protective clothing — Assessment of resistance of materials to molten metal splash
ISO 12127-1, Clothing for protection against heat and flame — Determination of contact heat transmission
through protective clothing or constituent materials — Part 1: Test method using contact heat produced by
heating cylinder
ISO 13506, Protective clothing against heat and flame — Test method for complete garments — Prediction
of burn injury using an instrumented manikin
ISO 13688, Protective clothing — General requirements
ISO 13934-1, Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and
elongation at maximum force using the strip method
© ISO 2015 – All rights reserved 1

---------------------- Page: 15 ----------------------

SIST EN ISO 11612:2015
ISO 11612:2015(E)

ISO 13935-2, Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2:
Determination of maximum force to seam rupture using the grab method
ISO 13937-2, Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped
test specimens (Single tear method)
ISO 13938-1, Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of
bursting strength and bursting distension
ISO 13938-2, Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of
bursting strength and bursting distension
ISO 15025, Protective clothing — Protection against heat and flame — Method of test for limited flame
spread
ISO 17493, Clothing and equipment for protection against heat — Test method for convective heat resistance
using a hot air circulating oven
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/TR 11610 and the following
apply.
3.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.