Radio Data System (RDS) - Receiver products and characteristics - Methods of measurement (IEC 62634:2015)

This International Standard describes how to measure minimum RDS receiver performance
requirements which concern three RDS receiver product categories. However, it should be
noted that there are also RDS receiver products on the market that significantly out-perform
the minimum RDS receiver performance requirements quoted.
Methods and algorithms to achieve automatic programme service-following by means of AF
lists are, however, very customer- and manufacturer-specific, and are therefore not covered in
this standard.

RDS-Empfänger-Produkte und -Eigenschaften - Messverfahren (IEC 62634:2015)

Système de radiodiffusion de données de service - Récepteurs et caractéristiques - Méthodes de mesure (IEC 62634:2015)

L'IEC 62634:2015 décrit les exigences minimales de performance des récepteurs RDS, qui concernent trois catégories de récepteurs RDS et leur mesure. Il convient néanmoins de noter qu'il existe aussi sur le marché des récepteurs RDS qui dépassent largement les exigences minimales de performances indiquées ici pour les récepteurs RDS. Cette deuxième édition annule et remplace la première édition publiée en 2011. Elle constitue une révision technique. Elle inclut les modifications suivantes:
- le cas de mesure d'essai à 100 kHz tiré de l'Article 8 de l'IEC 62634:2011 a été supprimé car il ne permettait pas d'obtenir des résultats de mesure stables et reproductibles;
- une erreur a été corrigée. À la place du terme "désaccentuation", il faut lire "préaccentuation".

Radijski podatkovni sistem (RDS) - Izdelki za sprejemnike in karakteristike - Merilne metode (IEC 62634:2015)

Ta mednarodni standard opisuje načine za merjenje minimalnih zahtev glede zmogljivosti sprejemnikov RDS, ki zadevajo tri kategorije izdelkov sprejemnikov RDS. Treba pa je poudariti, da so na trgu tudi sprejemniki RDS, ki znatno presegajo navedene minimalne zahteve glede zmogljivosti sprejemnikov RDS. Metode in algoritmi za doseganje samodejnega sledenja programskih storitev prek seznamov AF so odvisne od odjemalca in proizvajalca in zato niso zajete v tem standardu.

General Information

Status
Published
Publication Date
02-Jul-2015
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-May-2015
Due Date
27-Jul-2015
Completion Date
03-Jul-2015

Relations

Buy Standard

Standard
EN 62634:2015
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Radijski podatkovni sistem (RDS) - Izdelki za sprejemnike in karakteristike - Merilne metode (IEC 62634:2015)RDS-Empfänger-Produkte und -Eigenschaften - Messverfahren (IEC 62634:2015)Système de radiodiffusion de données de service - Récepteurs et caractéristiques - Méthodes de mesure (IEC 62634:2015)Radio Data System (RDS) - Receiver products and characteristics - Methods of measurement (IEC 62634:2015)33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 62634:2015SIST EN 62634:2015en,fr,de01-september-2015SIST EN 62634:2015SLOVENSKI
STANDARDSIST EN 62634:20111DGRPHãþD



SIST EN 62634:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62634
May 2015 ICS 33.060.20 Supersedes EN 62634:2011
English Version
Radio data system (RDS) - Receiver products and characteristics - Methods of Measurement (IEC 62634:2015)
Système de radiodiffusion de données (RDS) - Récepteurs et caractéristiques - Méthodes de mesure (IEC 62634:2015)
RDS-Empfänger-Produkte und -Eigenschaften - Messverfahren (IEC 62634:2015) This European Standard was approved by CENELEC on 2015-05-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62634:2015 E SIST EN 62634:2015



EN 62634:2015 - 2 - Foreword The text of document 100/2121/CDV, future edition 2 of IEC 62634, prepared by Technical Area 1 "Terminals for audio, video and data services and contents" of IEC/TC 100 "Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62634:2015.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-02-04 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-05-04
This document supersedes EN 62634:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 62634:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated :
ISO 14819 Series NOTE Harmonized as EN ISO 14819 Series. SIST EN 62634:2015



- 3 - EN 62634:2015 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu
Publication Year Title EN/HD Year
IEC 62106 -
Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting
in the frequency range from 87,5 to
108,0 MHz EN 62106 -
SIST EN 62634:2015



SIST EN 62634:2015



IEC 62634 Edition 2.0 2015-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio data system (RDS) – Receiver products and characteristics – Methods of measurement
Système de radiodiffusion de données (RDS) – Récepteurs et caractéristiques – Méthodes de mesure
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 33.060.20
ISBN 978-2-8322-2267-6
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 62634:2015



– 2 – IEC 62634:2015 © IEC 2015 CONTENTS
FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references. 7 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions . 7 3.2 Abbreviations . 8 4 Measuring method . 8 4.1 Standard measuring signal . 8 4.2 RDS data conditions . 9 4.2.1 General . 9 4.2.2 Matching circuit . 9 5 Measurement of the RDS sensitivity . 10 5.1 General . 10 5.2 Method of measurement . 10 5.3 Presentation of the results . 10 6 Measurement of the RDS data acquisition . 10 6.1 General . 10 6.2 Time to synchronise . 10 6.3 Time to detect a first PI . 11 6.4 Method of measurement . 11 7 Measurement of the large signal capabilities . 11 7.1 General . 11 7.2 Resistance to high wanted signal levels . 11 7.2.1 Method of measurement . 11 7.2.2 Large wanted signal requirement . 11 7.3 RDS performance at large unwanted signal . 11 7.3.1 Method of measurement . 11 7.3.2 Large unwanted signal requirements . 12 8 Measurement of the RDS selectivity . 12 8.1 General . 12 8.2 Method of measurement . 12 9 Considerations and guidelines for evaluation of the dynamic RDS performance . 13 9.1 General . 13 9.2 RDS dynamic behaviour . 13 9.3 Traffic announcements TA/TP . 14 9.3.1 TA message . 14 9.3.2 End of TA message . 14 9.3.3 TP search . 14 9.3.4 TA announcement skip . 14 9.4 Regionalisation . 14 9.4.1 Implementations . 14 9.4.2 Requirement . 15 Bibliography . 16 SIST EN 62634:2015



IEC 62634:2015 © IEC 2015 – 3 –
Figure 1 – Coupling circuit . 9 Figure 2 – Matching circuits for RDS product devices
with three different input impedances . 9
Table 1 – Presentation of the measurement result . 12 Table 2 – AF example . 15
SIST EN 62634:2015



– 4 – IEC 62634:2015 © IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
RADIO DATA SYSTEM (RDS) – RECEIVER PRODUCTS
AND CHARACTERISTICS – METHODS OF MEASUREMENT
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62634 has been prepared by technical area 1: Terminals for audio, video and data services and contents, of IEC technical committee 100: Audio, video and multimedia systems and equipment. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: • the ±100 kHz test measurement case from Clause 8 of IEC 62634:2011 was deleted as it did not permit to achieve stable and reproducible measurement results; • an error has been corrected. The term “de-emphasis” shall read correctly “pre-emphasis”. SIST EN 62634:2015



IEC 62634:2015 © IEC 2015 – 5 –
The text of this standard is based on the following documents: CDV Report on voting 100/2121/CCDV 100/2419/RVC
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
SIST EN 62634:2015



– 6 – IEC 62634:2015 © IEC 2015 INTRODUCTION This International Standard gives commonly agreed measuring methods to complement the RDS standard IEC 62106 and the RBDS standard (NRSC-4-A) in the USA. The RDS measuring methods presented here are directed at all manufacturers of RDS receiver products, and in particular tuner modules with embedded RDS functionality, including TMC (see ISO 14819 series of standards). SIST EN 62634:2015



IEC 62634:2015 © IEC 2015 – 7 –
RADIO DATA SYSTEM (RDS) – RECEIVER PRODUCTS
AND CHARACTERISTICS – METHODS OF MEASUREMENT
1 Scope This International Standard describes how to measure minimum RDS receiver performance requirements which concern three RDS receiver product categories. However, it should be noted that there are also RDS receiver products on the market that significantly out-perform the minimum RDS receiver performance requirements quoted. Methods and algorithms to achieve automatic programme service-following by means of AF lists are, however, very customer- and manufacturer-specific, and are therefore not covered in this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62106, Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. Terms and definitions of the RDS features used shall be found in IEC 62106. 3.1.1
RDS product category 1 RDS receiver product with high-ohmic input impedance
EXAMPLE For portable devices. 3.1.2
RDS product category 2 RDS receiver product with 50 Ω input impedance
EXAMPLE Car radio optimized for act
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.