SIST EN 2869:2010
(Main)Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/650 °C
Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/650 °C
This standard specifies the characteristics of hexagonal slotted/castellated nuts, normal height, normal across
flats, in heat resisting steel, passivated.
Classification: 1 100 MPa 1) / 650 °C 2)
Luft- und Raumfahrt - Flache Kronenmuttern, normale Höhe, normale Schlüsselweite, aus hochwarmfestem Stahl, passiviert - Klasse: 1100 MPa (bei Raumtemperatur)/650 °C
Diese Norm legt die Eigenschaften von flachen Sechskant-Kronenmuttern mit normaler Höhe und normaler Schlüsselweite, aus hochwarmfestem Stahl, passiviert, fest.
Klassifizierung: 1 100 MPa/650 °C
Série aérospatiale - Écrous hexagonaux à créneaux, hauteur normale, surplats normaux, en acier résistant à chaud, passivés - Classification: 1100 MPa (à température ambiante)/650 °C
Aeronavtika - Matice, šestrobe, z zarezo/kronske, normalna višina, z normalnim zevom ključa, iz toplotnoodpornega jekla, pasivirane - Klasifikacija: 1100 MPa (pri temperaturi okolice)/650 °C
Ta evropski standard določa značilnosti šestrobih matic z zarezo/kronskih, normalne višine, z normalnim zevom ključa, iz toplotnoodpornega jekla in pasiviranih. Klasifikacija: 1.100 MPa / 650°C.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Flache Kronenmuttern, normale Höhe, normale Schlüsselweite, aus hochwarmfestem Stahl, passiviert - Klasse: 1100 MPa (bei Raumtemperatur)/650 °CSérie aérospatiale - Écrous hexagonaux à créneaux, hauteur normale, surplats normaux, en acier résistant à chaud, passivés - Classification: 1100 MPa (à température ambiante)/650 °CAerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/650 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 2869:2009SIST EN 2869:2010en01-januar-2010SIST EN 2869:2010SLOVENSKI
STANDARD
SIST EN 2869:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2869
November 2009 ICS 49.030.30 English Version
Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated -Classification: 1 100 MPa (at ambient temperature) / 650 °C
Série aérospatiale - Écrous hexagonaux à créneaux, hauteur normale, surplats normaux, en acier résistant à chaud, passivés - Classification : 1 100 MPa (à température ambiante) / 650 °C
Luft- und Raumfahrt - Flache Kronenmuttern, normale Höhe, normale Schlüsselweite, aus hochwarmfestem Stahl, passiviert -Klasse: 1 100 MPa (bei Raumtemperatur) / 650 °C This European Standard was approved by CEN on 17 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2869:2009: ESIST EN 2869:2010
EN 2869:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Required characteristics .54Designation .75Marking .76Technical specification .8Bibliography .9 SIST EN 2869:2010
EN 2869:2009 (E) 3 Foreword This document (EN 2869:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 2869:2010
EN 2869:2009 (E) 4 1 Scope
This European Standard specifies the characteristics of hexagonal slotted/castellated nuts, normal height,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.