Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262

Specifies for fully threaded screws with machined, or rolled threads pitches of the thread ranging from 0,2 mm to 6 mm and thread diameters (coarse thread) ranging from 1 mm to 68 mm; it does not apply to those threaded fasteners where special requirements are laid down in the product standards.

Filets incomplets pour les éléments de fixation avec un filetage selon ISO 261 et ISO 262

Izteki navojev za vezne elemente z metrskim navojem ISO (po ISO 261 in ISO 262)

General Information

Status
Published
Publication Date
31-Mar-1996
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-1996
Due Date
01-Apr-1996
Completion Date
01-Apr-1996

Buy Standard

Standard
ISO 3508:1976 - Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 3508:1996
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 3508:1976 - Filets incomplets pour les éléments de fixation avec un filetage selon ISO 261 et ISO 262
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 3508:1976 - Filets incomplets pour les éléments de fixation avec un filetage selon ISO 261 et ISO 262
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

~~
INTERNATIONAL STANDARD 3508
.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l EWiYHAPOllHAR OPI-AHM3AUWII no CTAH~APTH3AUMH.ORGANISATION INTERNATIONALE DE NORMALISATION
Thread run-outs for fasteners with thread in accordance
with IS0 261 and IS0 262
Filets imompks pour les &ments ’de fixation avec un filetage selon IS0 261 et IS0 262
First edition - 1976-02-01
Ref. No. IS0 35084976 (E)
UDC 621.882.082.1
Descriptors : screws, screw threads, thread run-out, metric system.
Price based on 3 pages

---------------------- Page: 1 ----------------------
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (is0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 3508 was drawn up by Technical Committee lSO/TC 2,
Fasteners, and circulated to the Member Bodies in September 1974.
It has been approved by the Member Bodies of the following countries :
Australia . Romania
Germany
South Africa, Rep. of
Austria Hungary
Sweden
Belgium India
Switzerland
Bulgaria Ireland
Turkey
Canada New Zealand
United Kingdom
Chile Norway
Denmark Poland U.S.S:R.
Yugoslavia
Finland Portugal
pressed disapproval of the
The Member Bodies of the fol lowing countries ex
grounds :
document on technical
France
Italy
U.S.A.
0 International Organization for Standardization, 1976 l
Printed in Switzerland

---------------------- Page: 2 ----------------------
ISO3508-1976 (E)
INTERNATIONAL STANDARD
Thread run-outs for fasteners with thread in accordance
with IS0 261 and IS0 262
I SCOPE AND FIELD OF APPLICATION
This International Standard specifies thread run-outs for fasteners
...

SLOVENSKI STANDARD
SIST ISO 3508:1996
01-april-1996
Izteki navojev za vezne elemente z metrskim navojem ISO (po ISO 261 in ISO 262)
Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
Filets incomplets pour les éléments de fixation avec un filetage selon ISO 261 et ISO 262
Ta slovenski standard je istoveten z: ISO 3508:1976
ICS:
21.040.10 Metrski navoji Metric screw threads
21.060.01 Vezni elementi na splošno Fasteners in general
SIST ISO 3508:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 3508:1996

---------------------- Page: 2 ----------------------

SIST ISO 3508:1996
~~
INTERNATIONAL STANDARD 3508
.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l EWiYHAPOllHAR OPI-AHM3AUWII no CTAH~APTH3AUMH.ORGANISATION INTERNATIONALE DE NORMALISATION
Thread run-outs for fasteners with thread in accordance
with IS0 261 and IS0 262
Filets imompks pour les &ments ’de fixation avec un filetage selon IS0 261 et IS0 262
First edition - 1976-02-01
Ref. No. IS0 35084976 (E)
UDC 621.882.082.1
Descriptors : screws, screw threads, thread run-out, metric system.
Price based on 3 pages

---------------------- Page: 3 ----------------------

SIST ISO 3508:1996
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (is0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 3508 was drawn up by Technical Committee lSO/TC 2,
Fasteners, and circulated to the Member Bodies in September 1974.
It has been approved by the Member Bodies of the following countries :
Australia . Romania
Germany
South Africa, Rep. of
Austria Hungary
Sweden
Belgium India
Switzerland
Bulgaria Ireland
Turkey
Canada New Zealand
United Kingdom
Chile Norway
Denmark Poland U.S.S:R.
Yugoslavia
Finland Portugal
pressed disapproval of the
The Member Bodies of the fol lowing countries ex
grounds :
document on
...

NORME INTERNATIONALE.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .ME)KaYHAPOfiHAII OPTAHM3ALWI l-I0 CTAHflAPTM3ALWWi .ORGANISATION INTERNATIONALE DE NORMALISATION
Filets incomplets pour.les éléments de fixation avec un
filetage selon ISO 261 et ISO 262
Thread mn-outs for fasteners with thread in accordance with /SO 267 and /SO 262
Première édition - 1976-02-01
Réf. n* : ISO 35084976 (F)
CDU 621.882.082.1
filet incomplet, système métrique.
Descripteurs : vis, filetage,
Prix basé sur 3 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres ISO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 3508 a été établie par le Comité Technique lSO/TC 2,
Éléments de fixation, et soumise aux Comités Membres en septembre 1974.
Elle a été approuvée par les Comités Membres des pays suivants I
Afrique du Sud, Rép. d’ Danemark Portugal
Al lemagne Finlande Roumanie
Australie Hongrie Royaume-Uni
Autriche Inde Suède
Belgique Irlande Suisse
Bulgarie
Norvège Turquie
Canada
Nouvelle-Zélande U.R.S.S.
Chili Yougoslavie
Pologne
Les Comités Membres des pays suivants ont désapprouvé le document pour des
raisons techniques :
France
Italie
U.S.A.
0 Organisation Internationale de Normalisation, 1976 l
I mpr i mé en Suisse

---------------------- Page: 2 ----------------------
ISO3508=1976(F)
NORME INTERNATIONALE
Filets incomplets pour les éléments de fixation avec un
filetage selon ISO 261 et ISO 262
1 OBJET ET DOMAINE D’APPLICATION
La présente Norme Internationale spécifie les filets incomplets pour les éléments de fixation avec un filetage selon ISO 261,
Filetages métriqu
...

NORME INTERNATIONALE.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .ME)KaYHAPOfiHAII OPTAHM3ALWI l-I0 CTAHflAPTM3ALWWi .ORGANISATION INTERNATIONALE DE NORMALISATION
Filets incomplets pour.les éléments de fixation avec un
filetage selon ISO 261 et ISO 262
Thread mn-outs for fasteners with thread in accordance with /SO 267 and /SO 262
Première édition - 1976-02-01
Réf. n* : ISO 35084976 (F)
CDU 621.882.082.1
filet incomplet, système métrique.
Descripteurs : vis, filetage,
Prix basé sur 3 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres ISO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 3508 a été établie par le Comité Technique lSO/TC 2,
Éléments de fixation, et soumise aux Comités Membres en septembre 1974.
Elle a été approuvée par les Comités Membres des pays suivants I
Afrique du Sud, Rép. d’ Danemark Portugal
Al lemagne Finlande Roumanie
Australie Hongrie Royaume-Uni
Autriche Inde Suède
Belgique Irlande Suisse
Bulgarie
Norvège Turquie
Canada
Nouvelle-Zélande U.R.S.S.
Chili Yougoslavie
Pologne
Les Comités Membres des pays suivants ont désapprouvé le document pour des
raisons techniques :
France
Italie
U.S.A.
0 Organisation Internationale de Normalisation, 1976 l
I mpr i mé en Suisse

---------------------- Page: 2 ----------------------
ISO3508=1976(F)
NORME INTERNATIONALE
Filets incomplets pour les éléments de fixation avec un
filetage selon ISO 261 et ISO 262
1 OBJET ET DOMAINE D’APPLICATION
La présente Norme Internationale spécifie les filets incomplets pour les éléments de fixation avec un filetage selon ISO 261,
Filetages métriqu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.