SIST EN 710:2000

Oznaka standarda: SIST EN 710:2000
Koda projekta: 00202002
Organizacija: SIST
Naslov (angleški): Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
Naslov (slovenski): Varnostne zahteve za livarske stroje, stroje za izdelavo jeder in pripadajočo opremo
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 710:2000 angleški jezik Withdrawn SIST-M: 119.79 EUR
PDF
Papir
Tehnični odbor: I13 - Imaginarni 13
ICS: 25.120.30
Status: Razveljavljen
Objavljen: 01-Apr-2000
Refer. št. objave: Sporocila 2000-04-01
Razveljavitev: 01-Jul-2010
Referenca razveljavitve: Sporočila 2010-07
Referenčna oznaka: EN 710:1997
Področje projekta (angleško): This standard specifies safety requirements to be met by the manufacturer for machines and plant used in foundries for the production of castings in disposable moulds. It takes into account the foreseeable significant hazards due to design, construction and installation that may occur during commissioning, operation, maintenance and decommissioning. It specifies preventative measures and verification means for the elimination or reduction of these hazards. It specifies requirements for information to be provided by the manufacturer to the user on safe operation and maintenance. This standard applies to the following equipment: Machinery and plant constructed to condition and/or reclaim foundry sands; Moulding machinery and plants; Coremaking machinery and plants; Knock-out equipment; Other directly associated equipment. The foreseeable significant hazards covered are listed in clause 5 and include: mechanical hazards, movement of machinery and workpieces, ejection of material, of liquids and gases, inadequacy of the mechanical strength; explosion, fire, exothermic reactions; contact with hot parts, gases and flames; noise and vibration; thermal heat radiation and conduction; harmful by-products, poisoning, pollution of operators breathing air. This standard applies to equipment covered by this standard which is placed on the market after the date of issue of this standard. This standard does not cover the safety requirements for wax- and lost foam pattern production and wax removal equipment and drying ovens. This standard does not apply to crane installations, winches, continuous conveyors or handling systems which could be an integral part of the above equipment. The standard does not cover dust reduction equipment.
Povezava na standarde
Povezava Ime Datum
Konsolidiran z SIST EN 710:2000+A1:2010 - Varnost strojev - Varnostne zahteve za livarske stroje, stroje za izdelavo jeder in pripadajočo opremo 01-Jul-2010
Dopolnjen z SIST EN 710:2000/kFprA1:2009 - Varnost strojev - Varnostne zahteve za livarske stroje, stroje za izdelavo jeder in pripadajočo opremo 01-Nov-2009


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi