SIST EN IEC 61557-2:2022
(Main)Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance (IEC 61557-2:2019)
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance (IEC 61557-2:2019)
This part of IEC 61557 specifies the requirements applicable to equipment for measuring the
insulation resistance of equipment and installations in the de-energized state.
Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V - Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 2: Isolationswiderstand (IEC 61557-2:2019)
Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V. c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection - Partie 2: Résistance d'isolement (IEC 61557-2:2019)
IEC 61557-2:2019 est disponible sous forme de IEC 61557-2:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 61557-2:2019 spécifie les exigences applicables aux appareils destinés à mesurer la résistance d'isolement d'appareils et d'installations hors tension. L'IEC 61557-2:2019 annule et remplace la deuxième édition parue en 2007. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition antérieure:
a) ajout d'une exigence relative à la catégorie de mesure;
b) ajout de nouvelles exigences relatives aux instructions de fonctionnement;
c) alignement de la structure sur l'ensemble de la série IEC 61557.
Električna varnost v nizkonapetostnih razdelilnih sistemih za izmenične napetosti do 1 kV in enosmerne napetosti do 1,5 kV - Oprema za preskušanje, merjenje ali nadzorovanje zaščitnih ukrepov - 2. del: Izolacijska upornost (IEC 61557-2:2019)
Ta del standarda IEC 61557 določa zahteve, ki veljajo za opremo za merjenje izolacijske upornosti opreme in inštalacij v izključenem stanju.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61557-2:2022
01-marec-2022
Nadomešča:
SIST EN 61557-2:2007
Električna varnost v nizkonapetostnih razdelilnih sistemih za izmenične napetosti
do 1 kV in enosmerne napetosti do 1,5 kV - Oprema za preskušanje, merjenje ali
nadzorovanje zaščitnih ukrepov - 2. del: Izolacijska upornost (IEC 61557-2:2019)
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. -
Equipment for testing, measuring or monitoring of protective measures - Part 2:
Insulation resistance (IEC 61557-2:2019)
Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V -
Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 2:
Isolationswiderstand (IEC 61557-2:2019)
Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1
500 V. c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de
protection - Partie 2: Résistance d'isolement (IEC 61557-2:2019)
Ta slovenski standard je istoveten z: EN IEC 61557-2:2021
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
29.080.01 Električna izolacija na Electrical insulation in
splošno general
29.240.01 Omrežja za prenos in Power transmission and
distribucijo električne energije distribution networks in
na splošno general
SIST EN IEC 61557-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61557-2:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 61557-2:2022
EUROPEAN STANDARD EN IEC 61557-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 17.220.20; 29.080.01; 29.240.01 Supersedes EN 61557-2:2007 and all of its amendments
and corrigenda (if any)
English Version
Electrical safety in low voltage distribution systems up to 1 000 V
AC and 1 500 V DC - Equipment for testing, measuring or
monitoring of protective measures - Part 2: Insulation resistance
(IEC 61557-2:2019)
Sécurité électrique dans les réseaux de distribution basse Elektrische Sicherheit in Niederspannungsnetzen bis AC 1
tension au plus égale à 1 000 V c.a. et 1 500 V c.c. - 000 V und DC 1 500 V - Geräte zum Prüfen, Messen oder
Dispositifs de contrôle, de mesure ou de surveillance de Überwachen von Schutzmaßnahmen - Teil 2:
mesures de protection - Partie 2: Résistance d'isolement Isolationswiderstand
(IEC 61557-2:2019) (IEC 61557-2:2019)
This European Standard was approved by CENELEC on 2021-11-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61557-2:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61557-2:2022
EN IEC 61557-2:2021 (E)
European foreword
The text of document 85/688/FDIS, future edition 3 of IEC 61557-2, prepared by IEC/TC 85
"Measuring equipment for electrical and electromagnetic quantities" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61557-2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-08-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-11-10
document have to be withdrawn
This document supersedes EN 61557-2:2007 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61557-2:2019 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61557-2:2022
EN IEC 61557-2:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61010-1 2010 Safety requirements for electrical equipment EN 61010-1 2010
for measurement, control, and laboratory
use - Part 1: General requirements
+ A1 (mod) 2016 + A1 2019
IEC 61010-031 2015 Safety requirements for electrical equipment EN 61010-031 2015
for measurement, control and laboratory use
- Part 031: Safety requirements for hand-
held probe assemblies for electrical
measurement and test
IEC 61010-2-034 2017 Safety requirements for electrical equipment EN IEC 61010-2-034 2021
for measurement, control, and laboratory
use - Part 2-034: Particular requirements for
measurement equipment for insulation
resistance and test equipment for electric
strength
- - + A11 2021
IEC 61557-1 2019 Electrical safety in low voltage distribution EN IEC 61557-1 2021
systems up to 1 000 V AC and 1 500 V DC -
Equipment for testing, measuring or
monitoring of protective measures - Part 1:
General requirements
3
---------------------- Page: 5 ----------------------
SIST EN IEC 61557-2:2022
---------------------- Page: 6 ----------------------
SIST EN IEC 61557-2:2022
IEC 61557-2
®
Edition 3.0 2019-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and
1 500 V d.c. – Equipment for testing, measuring or monitoring of protective
measures –
Part 2: Insulation resistance
Sécurité électrique dans les réseaux de distribution basse tension au plus égale
à 1 000 V c.a. et 1 500 V c.c. – Dispositifs de contrôle, de mesure ou de
surveillance de mesures de protection –
Partie 2: Résistance d'isolement
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.220.20; 29.080.01; 29.240.01 ISBN 978-2-8322-7155-1
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 61557-2:2022
– 2 – IEC 61557-2:2019 © IEC 2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 6
4.1 General requirements . 6
4.2 Output voltage . 6
4.3 Rated current . 6
4.4 Measuring current . 6
4.5 Influence of external capacitors . 6
4.6 Overvoltage . 6
5 Marking and operating instructions . 7
5.1 Marking . 7
5.2 Operating instructions . 7
6 Tests . 8
6.1 General . 8
6.2 Operating uncertainty . 8
6.3 Open-circuit voltage . 8
6.4 Rated current . 8
6.5 Measuring current . 9
6.6 Overvoltage tests . 9
6.6.1 Overvoltage tests with AC voltage . 9
6.6.2 Overvoltage tests with DC voltage . 9
6.7 Battery life in battery operated instruments . 9
6.8 Stability test . 9
Figure 1 – Example of a pictogram for a 500 V AC system . 7
Table 1 – Calculation of operating uncertainty . 8
---------------------- Page: 8 ----------------------
SIST EN IEC 61557-2:2022
IEC 61557-2:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION
SYSTEMS UP TO 1 000 V AC AND 1 500 V DC –
EQUIPMENT FOR TESTING, MEASURING
OR MONITORING OF PROTECTIVE MEASURES –
Part 2: Insulation resistance
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
...
SLOVENSKI STANDARD
oSIST prEN 61557-2:2018
01-april-2018
(OHNWULþQDYDUQRVWYQL]NRQDSHWRVWQLKUD]GHOLOQLKVLVWHPLKL]PHQLþQHQDSHWRVWLGR
N9LQHQRVPHUQHQDSHWRVWLGRN92SUHPD]DSUHVNXãDQMHPHUMHQMHDOL
QDG]RURYDQMH]DãþLWQLKXNUHSRYGHO ,]RODFLMVNDXSRUQRVW
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. -
Equipment for testing, measuring or monitoring of protective measures - Part 2:
Insulation resistance
Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V -
Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 2:
Isolationswiderstand
Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1
500 V. c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de
protection - Partie 2: Résistance d'isolement
Ta slovenski standard je istoveten z: prEN 61557-2:2018
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
29.080.01 (OHNWULþQDL]RODFLMDQD Electrical insulation in
VSORãQR general
29.240.01 2PUHåMD]DSUHQRVLQ Power transmission and
GLVWULEXFLMRHOHNWULþQHHQHUJLMH distribution networks in
QDVSORãQR general
oSIST prEN 61557-2:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 61557-2:2018
---------------------- Page: 2 ----------------------
oSIST prEN 61557-2:2018
85/630/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61557-2 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2018-02-09 2018-05-04
SUPERSEDES DOCUMENTS:
85/608/CD,85/622/CC
IEC TC 85 : MEASURING EQUIPMENT FOR ELECTRICAL AND ELECTROMAGNETIC QUANTITIES
SECRETARIAT: SECRETARY:
China Mr Bo Chen
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 23,TC 26,TC 44,TC 62,TC 64,TC 66,TC 108
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
TITLE:
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for
testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2017 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN 61557-2:2018
- 2 - 85/630/CDV
1 CONTENTS
2
3 1 Scope . - 5 -
4 2 Normative references . - 5 -
5 3 Terms and definitions . - 5 -
6 4 Requirements . - 5 -
7 4.1 General . - 5 -
8 4.2 Output voltage . - 6 -
9 4.3 Rated current . - 6 -
10 4.4 Measuring current . - 6 -
11 4.5 Influence by an external capacitors . - 6 -
12 4.6 Overvoltage . - 6 -
13 5 Marking and operating instructions . - 7 -
14 5.1 Marking . - 7 -
15 5.2 Operating instructions . - 7 -
16 6 Tests . - 7 -
17 6.1 General . - 7 -
18 6.2 Operating uncertainty . - 7 -
19 6.3 Open-circuit voltage . - 8 -
20 6.4 Rated current . - 8 -
21 6.5 Measuring current . - 8 -
22 6.6 Overvoltage tests . - 8 -
23 6.6.1 Overvoltage tests with AC voltage . - 8 -
24 6.6.2 Overvoltage tests with DC voltage . - 8 -
25 6.7 Battery life in battery operated instruments . - 9 -
26 6.8 Stability test . - 9 -
27
28 Figure 1 – Example of a pictogram for a 500 V AC system . - 6 -
29
30
31 Table 1 – Calculation of operating uncertainty . - 7 -
32
33
---------------------- Page: 4 ----------------------
oSIST prEN 61557-2:2018
- 3 - 85/630/CDV
34 INTERNATIONAL ELECTROTECHNICAL COMMISSION
35 ____________
36
37 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS
38 UP TO 1 000 V AC AND 1 500 V DC –
39 EQUIPMENT FOR TESTING, MEASURING OR MONITORING
40 OF PROTECTIVE MEASURES –
41
42 Part 2: Insulation resistance
43
44
45
46 FOREWORD
47
48 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
49 national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
50 operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to
51 other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available
52 Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical
53 committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work.
54 International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation.
55 IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions
56 determined by agreement between the two organizations.
57 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
58 consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC
59 National Committees.
60 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees
61 in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate,
62 IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
63 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently
64 to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication
65 and the corresponding national or regional publication shall be clearly indicated in the latter.
66 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
67 services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
68 independent certification bodies.
69 6) All users should ensure that they have the latest edition of this publication.
70 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of
71 its technical committees and IEC National Committees for any personal injury, property damage or other damage of any
72 nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the
73 publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
74 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
75 indispensable for the correct application of this publication.
76 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
77 IEC shall not be held responsible for identifying any or all such patent rights.
78 International Standard IEC 61557-2 has been prepared by subcommittee TC85: Measuring equipment
79 for electrical and electromagnetic quantities.
80 This third edition cancels and replaces the second edition published in 2007. This edition constitutes a
81 technical revision.
82 This edition includes the following significant technical changes with respect to the previous edition:
83 a) requirement for measurement category added
84 b) new requirements for operating instructions added
85 c) Alignment of the structure to the whole series IEC 61557
86
87 The text of this standard is based on the following documents:
---------------------- Page: 5 ----------------------
oSIST prEN 61557-2:2018
- 4 - 85/630/CDV
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
88
89 Full information on the voting for the approval of this standard can be found in the report on voting
90 indicated in the above table.
91 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
92 This part of IEC 61557 shall be used in conjunction with Part 1.
93 A list of all par
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.