Thermal insulating products for building applications - Determination of bending behaviour

This European Standard specifies the equipment and procedures for determining the bending behaviour of full size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products. The test is designed to determine the bending strength of products and their deflection at a given load. The method can be used to determine the resistance of the product to bending stresses during transport and application.

Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei Biegebeanspruchung

Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung des Verhaltens bei Biege-beanspruchung von Produkten in Liefermaßen (Prüfverfahren A) und von Probekörpern (Prüfverfahren B) unter einer 3-Punkt-Beanspruchung fest. Sie gilt für Wärmedämmstoffe. Das Prüfverfahren dient zur Bestimmung der Biegefestigkeit von Produkten und deren Durchbiegung bei einer gegebenen Belastung. Das Prüfverfahren kann angewendet werden, um die Widerstandsfähigkeit eines Produkts gegen Biegespannungen bei Transport und Anwendung zu bestimmen.

Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexion

La présente Norme européenne spécifie l'équipement et les modes opératoires permettant de déterminer le comportement en flexion des produits en vraies dimensions (méthode A) et des éprouvettes (méthode B) sous l'action d'une charge répartie en trois points. Elle s'applique aux produits isolants thermiques.
L'essai est conçu pour déterminer la résistance à la flexion des produits ainsi que la flèche correspondante à une charge donnée.
La méthode peut être utilisée pour déterminer la résistance du produit aux contraintes de flexion pendant le transport et la mise en œuvre.

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja pri upogibu

Ta evropski standard določa opremo in postopke za ugotavljanje obnašanja pri upogibu proizvodov naravne velikosti (metoda A) in preskušancev (metoda B) pri tritočkovni obremenitvi. Uporablja se za toplotnoizolacijske proizvode. Preskus je namenjen ugotavljanju upogibne trdnosti proizvodov in upogibnosti ob določeni obremenitvi. Ta metoda se lahko uporablja za ugotavljanje, ali je proizvod dovolj močan, da vzdrži napetosti med prevozom in uporabo.

General Information

Status
Published
Public Enquiry End Date
29-Sep-2012
Publication Date
05-Jun-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-Mar-2013
Due Date
27-May-2013
Completion Date
06-Jun-2013

Relations

Buy Standard

Standard
EN 12089:2013 (EN)
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 12089:2013 (DE)
German language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 12089:2012
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja pri upogibuWärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei BiegebeanspruchungProduits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexionThermal insulating products for building applications - Determination of bending behaviour91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 12089:2013SIST EN 12089:2013en,fr,de01-julij-2013SIST EN 12089:2013SLOVENSKI
STANDARDSIST EN 12089:19991DGRPHãþD



SIST EN 12089:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12089
March 2013 ICS 91.100.60 Supersedes EN 12089:1997English Version
Thermal insulating products for building applications - Determination of bending behaviour
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexion
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei Biegebeanspruchung This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12089:2013: ESIST EN 12089:2013



EN 12089:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle. 6 5 Apparatus . 6 6 Test specimens . 7 7 Procedure . 8 8 Calculation and expression of results . 9 9 Accuracy of measurement . 10 10 Test report . 10
SIST EN 12089:2013



EN 12089:2013 (E) 3 Foreword This document (EN 12089:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulation materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12089:1997.
The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in buildings but it may also be used in other areas where it is relevant. This European test standard is one of the following group of inter-related standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which come within the scope of CEN/TC 88:  EN 822, Thermal insulating products for building applications — Determination of length and width  EN 823, Thermal insulating products for building applications — Determination of thickness  EN 824, Thermal insulating products for building applications — Determination of squareness  EN 825, Thermal insulating products for building applications — Determination of flatness  EN 826, Thermal insulating products for building applications — Determination of compression behaviour  EN 1602, Thermal insulating products for building applications — Determination of the apparent density  EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity)  EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions  EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions  EN 1606, Thermal insulating products for building applications — Determination of compressive creep SIST EN 12089:2013



EN 12089:2013 (E) 4  EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces  EN 1608, Thermal insulating products for building applications — Determination of tensile strength parallel to faces  EN 1609, Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion  EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of test specimens  EN 12086, Thermal insulating products for building applications — Determination of water vapour transmission properties  EN 12087, Thermal insulating products for building applications — Determination of long-term water absorption by immersion  EN 12088, Thermal insulating products for building applications — Determination of long-term water absorption by diffusion  EN 12089, Thermal insulating products for building applications — Determination of bending behaviour  EN 12090, Thermal insulating products for building applications — Determination of shear behaviour  EN 12091, Thermal insulating products for building applications — Determination of freeze-thaw resistance  EN 12429, Thermal insulating products for building applications — Conditioning to moisture equilibrium under specified temperature and humidity conditions  EN 12430, Thermal insulating products for building applications — Determination of behaviour under point load  EN 12431, Thermal insulating products for building applications — Determination of thickness for floating floor insulating products  EN 13793, Thermal insulating products for building applications — Determination of behaviour under cyclic loading  EN 13820, Thermal insulating materials for building applications — Determination of organic content According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 12089:2013



EN 12089:2013 (E) 5 1 Scope This European Standard specifies the equipment and procedures for determining the bending behaviour of full size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products. The test is designed to determine the bending strength of products and their deflection at a given load. The method can be used to determine the resistance of the product to bending stresses during transport and application. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insul
...

SLOVENSKI STANDARD
SIST EN 12089:2013
01-julij-2013
Nadomešča:
SIST EN 12089:1999
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja
pri upogibu
Thermal insulating products for building applications - Determination of bending
behaviour
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei
Biegebeanspruchung
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du
comportement en flexion
Ta slovenski standard je istoveten z: EN 12089:2013
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
SIST EN 12089:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12089:2013

---------------------- Page: 2 ----------------------
SIST EN 12089:2013


EUROPÄISCHE NORM
EN 12089

EUROPEAN STANDARD

NORME EUROPÉENNE
März 2013
ICS 91.100.60 Ersatz für EN 12089:1997
Deutsche Fassung
Wärmedämmstoffe für das Bauwesen - Bestimmung des
Verhaltens bei Biegebeanspruchung
Thermal insulating products for building applications - Produits isolants thermiques destinés aux applications du
Determination of bending behaviour bâtiment - Détermination du comportement en flexion
Diese Europäische Norm wurde vom CEN am 15. Dezember 2012 angenommen.

Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter denen
dieser Europäischen Norm ohne jede Änderung der Status einer nationalen Norm zu geben ist. Auf dem letzten Stand befindliche Listen
dieser nationalen Normen mit ihren bibliographischen Angaben sind beim Management-Zentrum des CEN-CENELEC oder bei jedem CEN-
Mitglied auf Anfrage erhältlich.

Diese Europäische Norm besteht in drei offiziellen Fassungen (Deutsch, Englisch, Französisch). Eine Fassung in einer anderen Sprache,
die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem Management-
Zentrum mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen jugoslawischen
Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland, Litauen, Luxemburg, Malta,
den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz, der Slowakei, Slowenien, Spanien, der
Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und Zypern.





EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

Management-Zentrum: Avenue Marnix 17, B-1000 Brüssel
© 2013 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. EN 12089:2013 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten.

---------------------- Page: 3 ----------------------
SIST EN 12089:2013
EN 12089:2013 (D)
Inhalt Seite
Vorwort .3
1 Anwendungsbereich .5
2 Normative Verweisungen .5
3 Begriffe .5
4 Kurzbeschreibung .6
5 Prüfeinrichtungen .6
6 Probekörper .7
7 Prüfverfahren .8
8 Ermittlung und Angabe der Ergebnisse .9
9 Genauigkeit der Messungen . 10
10 Prüfbericht . 10

2

---------------------- Page: 4 ----------------------
SIST EN 12089:2013
EN 12089:2013 (D)
Vorwort
Dieses Dokument (EN 12089:2013) wurde vom Technischen Komitee CEN/TC 88 „Wärmedämmstoffe und
wärmedämmende Produkte“ erarbeitet, dessen Sekretariat vom DIN gehalten wird.
Diese Europäische Norm muss den Status einer nationalen Norm erhalten, entweder durch Veröffentlichung
eines identischen Textes oder durch Anerkennung bis September 2013, und etwaige entgegenstehende
nationale Normen müssen bis September 2013 zurückgezogen werden.
Es wird auf die Möglichkeit hingewiesen, dass einige Elemente dieses Dokuments Patentrechte berühren
können. CEN [und/oder CENELEC] sind nicht dafür verantwortlich, einige oder alle diesbezüglichen
Patentrechte zu identifizieren.
Diese Norm ersetzt EN 12089:1997.
Die überarbeitete Fassung dieser Norm enthält keine wesentlichen Änderungen, sondern nur geringfügige
redaktionelle Korrekturen und Ergänzungen.
Diese Europäische Norm gehört zu einer Normenreihe, die Prüfverfahren zur Bestimmung der Maße und
Eigenschaften von Wärmedämmstoffen und -produkten festlegt. Sie unterstützt eine Reihe von
Produktnormen für Wärmedämmstoffe und -produkte, welche entsprechend der Richtlinie des Rates vom
21.12.1988 zur Angleichung von Gesetzen, Verordnungen und Verwaltungsvorschriften der Mitgliedstaaten
für Bauprodukte (Richtlinie 89/106/EWG) unter Beachtung der wesentlichen Anforderungen erarbeitet wurden.
Diese Europäische Norm gilt für Anwendungen im Bauwesen; sie darf aber auch in anderen Bereichen, sofern
geeignet, angewendet werden.
Diese europäische Prüfnorm gehört zur folgenden Gruppe von miteinander zusammenhängenden Normen für
Prüfverfahren zur Bestimmung der Maße und Eigenschaften von werkmäßig hergestellten
Wärmedämmstoffen und -produkten, die alle in den Aufgabenbereich von CEN/TC 88 gehören:
EN 822, Wärmedämmstoffe für das Bauwesen — Bestimmung der Länge und Breite
EN 823, Wärmedämmstoffe für das Bauwesen — Bestimmung der Dicke
EN 824, Wärmedämmstoffe für das Bauwesen — Bestimmung der Rechtwinkligkeit
EN 825, Wärmedämmstoffe für das Bauwesen — Bestimmung der Ebenheit
EN 826, Wärmedämmstoffe für das Bauwesen — Bestimmung des Verhaltens bei Druckbeanspruchung
EN 1602, Wärmedämmstoffe für das Bauwesen — Bestimmung der Rohdichte
EN 1603, Wärmedämmstoffe für das Bauwesen — Bestimmung der Dimensionsstabilität im Normalklima
(23 °C/ 50 % relative Luftfeuchte)
EN 1604, Wärmedämmstoffe für das Bauwesen — Bestimmung der Dimensionsstabilität bei definierten
Temperatur- und Feuchtebedingungen
EN 1605, Wärmedämmstoffe für das Bauwesen — Bestimmung der Verformung bei definierter Druck- und
Temperaturbeanspruchung
EN 1606, Wärmedämmstoffe für das Bauwesen — Bestimmung des Langzeit-Kriechverhaltens bei
Druckbeanspruchung
3

---------------------- Page: 5 ----------------------
SIST EN 12089:2013
EN 12089:2013 (D)
EN 1607, Wärmedämmstoffe für das Bauwesen — Bestimmung der Zugfestigkeit senkrecht zur Plattenebene
EN 1608, Wärmedämmstoffe für das Bauwesen — Bestimmung der Zugfestigkeit in Plattenebene
EN 1609, Wärmedämmstoffe für das Bauwesen — Bestimmung der Wasseraufnahme bei kurzzeitigem
teilweisem Eintauchen
EN 12085, Wärmedämmstoffe für das Bauwesen — Bestimmung der linearen Maße von Probekörpern
EN 12086, Wärmedämmstoffe für das Bauwesen — Bestimmung der Wasserdampfdurchlässigkeit
EN 12087, Wärmedämmstoffe für das Bauwesen — Bestimmung der Wasseraufnahme bei langzeitigem
Eintauchen
EN 12088, Wärmedämmstoffe für das Bauwesen — Bestimmung der Wasseraufnahme durch Diffusion
EN 12089, Wärmedämmstoffe für das Bauwesen — Bestimmung des Verhaltens bei Biegebeanspruchung
EN 12090, Wärmedämmstoffe für das Bauwesen — Bestimmung des Verhaltens bei Scherbeanspruchung
EN 12091, Wärmedämmstoffe für das Bauwesen — Bestimmung des Verhaltens bei Frost-Tau-
Wechselbeanspruchung
EN 12429, Wärmedämmstoffe für das Bauwesen — Einstellen der Ausgleichsfeuchte bei definierten
Temperatur- und Feuchtebedingungen
EN 12430, Wärmedämmstoffe für das Bauwesen — Bestimmung des Verhaltens unter Punktlast
EN 12431, Wärmedämmstoffe für das Bauwesen — Bestimmung der Dicke von Dämmstoffen unter
schwimmendem Estrich
EN 13793, Wärmedämmstoffe für das Bauwesen — Bestimmung des Verhaltens unter zyklischer Belastung
EN 13820, Wärmedämmstoffe für das Bauwesen — Bestimmung des Gehalts an organischen Bestandteilen
Entsprechend der CEN-CENELEC-Geschäftsordnung sind die nationalen Normungsinstitute der folgenden
Länder gehalten, diese Europäische Norm zu übernehmen: Belgien, Bulgarien, Dänemark, Deutschland, die
ehemalige jugoslawische Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island,
Italien, Kroatien, Lettland, Litauen, Luxemburg, Malta, Niederlande, Norwegen, Österreich, Polen, Portugal,
Rumänien, Schweden, Schweiz, Slowakei, Slowenien, Spanien, Tschechische Republik, Türkei, Ungarn,
Vereinigtes Königreich und Zypern.

4

---------------------- Page: 6 ----------------------
SIST EN 12089:2013
EN 12089:2013 (D)
1 Anwendungsbereich
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung des Verhaltens bei
Biegebeanspruchung von Produkten in Liefermaßen (Prüfverfahren A) und von Probekörpern
(Prüfverfahren B) unter einer 3-Punkt-Beanspruchung fest. Sie gilt für Wärmedämmstoffe.
Das Prüfverfahren dient zur Bestimmung der Biegefestigkeit von Produkten und deren Durchbiegung bei einer
gegebenen Belastung.
Das Prüfverfahren kann angewendet werden, um die Widerstandsfähigkeit eines Produkts gegen
Biegespannungen bei Transport und Anwendung zu bestimmen.
2 Normative Verweisungen
Die folgenden Dokumente, die teilweise oder als Ganzes zitiert werden, sind für die Anwendung dieses
Dokuments erforderlich. Bei datierten Verweisungen gilt nur die in Bezug genommene Ausgabe. Bei
undatierten Verweisungen gilt die letzte Ausgabe des in Bezug genommenen Dokuments (einschließlich aller
Änderungen).
EN 822, Wärmedämmstoffe für das Bauwesen — Bestimmung der Länge und Breite
EN 823, Wärmedämmstoffe für das Bauwesen — Bestimmung der Dicke
EN 12085, Wärmedämmstoffe für das Bauwesen — Bestimmung der linearen Maße von Probekörpern
ISO 5725-1, Accuracy (trueness and pr
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja pri upogibuWärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei BiegebeanspruchungProduits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexionThermal insulating products for building applications - Determination of bending behaviour91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:FprEN 12089kSIST FprEN 12089:2012en,fr,de01-september-2012kSIST FprEN 12089:2012SLOVENSKI
STANDARD



kSIST FprEN 12089:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 12089
June 2012 ICS 91.100.60 Will supersede EN 12089:1997English Version
Thermal insulating products for building applications - Determination of bending behaviour
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en flexion
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei Biegebeanspruchung This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 12089:2012: EkSIST FprEN 12089:2012



FprEN 12089:2012 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Terms and definitions .54Principle .65Apparatus .66Test specimens .77Procedure .88Calculation and expression of results .99Accuracy of measurement . 1010Test report . 10 kSIST FprEN 12089:2012



FprEN 12089:2012 (E) 3 Foreword This document (FprEN 12089:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulation materials and products”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 12089:1997.
The revision of this standard contains no major changes only minor corrections and clarifications of editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in buildings but it may also be used in other areas where it is relevant. This EN test standard is one of the following group of inter-related standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which come within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823 ,Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Determination of compressive creep EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications — Determination of tensile strength parallel to faces kSIST FprEN 12089:2012



FprEN 12089:2012 (E) 4 EN 1609, Thermal insulating products for building applications — Determination of short term water absorption by partial immersion EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications — Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications — Determination of long term water absorption by immersion
EN 12088, Thermal insulating products for building applications — Determination of long term water absorption by diffusion EN 12089, Thermal insulating products for building applications — Determination of bending behaviour EN 12090, Thermal insulating products for building applications — Determination of shear behaviour EN 12091, Thermal insulating products for building applications — Determination of freeze-thaw resistance
EN 12429, Thermal insulating products for building applications — Conditioning to moisture equilibrium under specified temperature and humidity conditions EN 12430, Thermal insulating products for building applications — Determination of behaviour under point load EN 12431, Thermal insulating products for building applications — Determination of thickness for floating floor insulating products EN 13793, Thermal insulating products for building applications — Determination of behaviour under cyclic loading EN 13820, Thermal insulating products for building applications — Determination of organic content
kSIST FprEN 12089:2012



FprEN 12089:2012 (E) 5 1 Scope This European Standard specifies the equipment and procedures for determining the bending behaviour of full size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products. The test is designed to determine the bending strength of products and their deflection at a given load. The method can be used to determine the resistance of the product to bending stresses during transport and application. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of test specimens ISO 5725-1, Accuracy (trueness and precision)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.