Wood-based panels - Determination of edgewise bending properties

This European Standard specifies a method for the determination of strength, stiffness, creep and duration of load when wood-based panels are loaded in edgewise bending.
It is not applicable to extruded panels.

Holzwerkstoffe - Bestimmung der Eigenschaften bei Hochkantbiegung

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Festigkeit und Steifigkeit, des Kriechverhaltens und der Zeitstandfestigkeit von Holzwerkstoffen bei Hoch-kantbiegung fest.
Sie gilt nicht für Strangpressplatten.

Panneaux a base de bois - Détermination des propriétés de flexion sur chant

La présente norme européenne prescrit une méthode pour déterminer la résistance, la rigidité, le fluage et la durée de charge lorsque des panneaux a base de bois sont chargés en flexion sur chant.
Elle ne s'applique pas aux panneaux extrudés.

Lesne plošče – Ugotavljanje upogibnih lastnosti po robu

General Information

Status
Published
Publication Date
31-Dec-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2004
Due Date
01-Jan-2004
Completion Date
01-Jan-2004

Buy Standard

Standard
EN 13879:2004
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzwerkstoffe - Bestimmung der Eigenschaften bei HochkantbiegungPanneaux a base de bois - Détermination des propriétés de flexion sur chantWood-based panels - Determination of edgewise bending properties79.060.01Wood-based panels in generalICS:Ta slovenski standard je istoveten z:EN 13879:2002SIST EN 13879:2004en01-januar-2004SIST EN 13879:2004SLOVENSKI
STANDARD



SIST EN 13879:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13879May 2002ICS 79.060.01English versionWood-based panels - Determination of edgewise bendingpropertiesPanneaux à base de bois - Détermination des propriétés deflexion sur chantHolzwerkstoffe - Bestimmung der Eigenschaften beiHochkantbiegungThis European Standard was approved by CEN on 14 March 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13879:2002 ESIST EN 13879:2004



EN 13879:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Test pieces.45Conditioning.86Procedure.87Expression of results.88Test report.9SIST EN 13879:2004



EN 13879:2002 (E)3ForewordThis document (EN 13879:2002) has been prepared by Technical Committee CEN/TC 112, "Wood-based panels",the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby November 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13879:2004



EN 13879:2002 (E)41 ScopeThis European Standard specifies a method for the determination of strength, stiffness, creep and duration of loadwhen wood-based panels are loaded in edgewise bending.It is not applicable to extruded panels.2 Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references, the latest edition of thepublication referred to applies (including amendments).EN 310, Wood-based panels — Determinati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.