Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:1998)

Füllstoffe für Beschichtungsstoffe - Anforderungen und Prüfverfahren - Teil 6: Gefälltes Calciumcarbonat (ISO 3262-6:1998)

Dieser Teil von ISO 3262 legt Anforderungen und die entsprechenden Prüfverfahren für gefälltes Calciumcarbonat fest.

Matieres de charge pour peintures - Spécifications et méthodes d'essai - Partie 6: Carbonate de calcium précipité (ISO 3262-6:1998)

Polnila za barve - Specifikacije in metode preskušanja - 6. del: Oborjeni kalcijev karbonat (ISO 3262-6:1998)

General Information

Status
Withdrawn
Publication Date
30-Sep-1998
Withdrawal Date
09-Feb-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Dec-2022
Due Date
13-Jan-2023
Completion Date
10-Feb-2023

Relations

Buy Standard

Standard
EN ISO 3262-6:1998
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3262-6:1998
01-oktober-1998
Polnila za barve - Specifikacije in metode preskušanja - 6. del: Oborjeni kalcijev
karbonat (ISO 3262-6:1998)
Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium
carbonate (ISO 3262-6:1998)
Füllstoffe für Beschichtungsstoffe - Anforderungen und Prüfverfahren - Teil 6: Gefälltes
Calciumcarbonat (ISO 3262-6:1998)
Matieres de charge pour peintures - Spécifications et méthodes d'essai - Partie 6:
Carbonate de calcium précipité (ISO 3262-6:1998)
Ta slovenski standard je istoveten z: EN ISO 3262-6:1998
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 3262-6:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3262-6:1998

---------------------- Page: 2 ----------------------

SIST EN ISO 3262-6:1998

---------------------- Page: 3 ----------------------

SIST EN ISO 3262-6:1998

---------------------- Page: 4 ----------------------

SIST EN ISO 3262-6:1998

---------------------- Page: 5 ----------------------

SIST EN ISO 3262-6:1998

---------------------- Page: 6 ----------------------

SIST EN ISO 3262-6:1998
INTERNATIONAL ISO
STANDARD 3262-6
First edition
1998-07-01
Extenders for paints — Specifications and
methods of test —
Part 6:
Precipitated calcium carbonate
Matières de charge pour peintures — Spécifications et méthodes d'essai —
Partie 6: Carbonate de calcium précipité
A
Reference number
ISO 3262-6:1998(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 3262-6:1998
ISO 3262-6:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has the
right to be represented on that committee. International organizations, governmental and non-governmental, in liaison
with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC)
on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 3262-6 was prepared by Technical Committee ISO/TC 35, Paints and varnishes,
Subcommittee SC 2, Pigments and extenders.
Together with the other parts (see below), this part of ISO 3262 cancels and replaces ISO 3262:1975, which has been
technically revised. Part 1 comprises the definition of the term extender and a number of test methods that are
applicable to most extenders, whilst part 2 and the following parts specify requirements and, where appropriate,
particular test methods for individual extenders.
At present, the following parts of ISO 3262 are published or in preparation, under the general title Extenders for paints
— Specifications and methods of test:
— Part 1: Introduction and general test methods
— Part 2: Barytes (natural barium sulfate)
— Part 3: Blanc fixe
— Part 4: Whiting
— Part 5: Natural crystalline calcium carbonate
— Part 6: Precipitated calcium carbonate
— Part 7: Dolomite
— Part 8: Natural clay
— Part 9: Calcined clay
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 3262-6:1998
©
ISO ISO 3262-6:1998(E)
— Part 10: Natural talc/chlorite in lamellar form
— Part 11: Natural talc, in lamellar form, containing carbonates
— Part 12: Muscovite-type mica
— Part 13: Natural quartz (ground)
— Part 14: Cristobalite
— Part 15: Vitreous silica
— Part 16: Aluminium hydroxides
— Part 17: Precipitated calcium silicate
— Part 18: Precipitated sodium aluminium silicate
— Part 19: Precipitated silica
— Part 20: Fumed silica
— Part 21: Silica sand (unground natural quartz)
— Part 22: Diatomaceous earth (kieselguhr)
iii

---------------------- Page: 9 ----------------------

SIST EN ISO 3262-6:1998

---------------------- Page: 10 ----------------------

SIST EN ISO 3262-6:1998
©
INTERNATIONAL STANDARD  ISO ISO 3262-6:1998(E)
Extenders for paints — Specifications and methods of test —
Part 6:
Precipitated calcium carbonate
1 Scope
This part of ISO 3262 specifies requirements and corresponding methods of test for precipitated calcium carbonate.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of
ISO 3262. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties
to agreements based
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.