SIST EN 15061:2008+A1:2009

Oznaka standarda: SIST EN 15061:2008+A1:2009
Koda projekta: 00322023
Organizacija: SIST
Naslov (angleški): Safety of machinery - Safety requirements for strip processing line machinery and equipment
Naslov (slovenski): Varnost strojev - Varnostne zahteve za linijske stroje in opremo za obdelavo (kovinskih) trakov
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 15061:2008+A1:2009 angleški jezik Active SIST-M: 119.79 EUR
PDF
Papir
Tehnični odbor: I13 - Imaginarni 13
ICS: 13.110 77.180
Status: Objavljen
Objavljen: 01-jan-2009
Refer. št. objave: Sporočila 2009-01
Referenčna oznaka: EN 15061:2007+A1:2008
Področje projekta (angleško): This European Standard defines the health and safety requirements of strip processing lines (see 3.1). This European Standard deals with all significant hazards, hazardous situations and events relevant for strip processing line machinery and equipment, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable faults and malfunctions in case of misuse. This European Standard specifies the requirements to ensure the safety of persons which are to be considered and met during the design, assembly, transport, commissioning, operation, maintenance and decommissioning of the equipment. This European Standard applies to: Strip processing lines for treating metal strip: from take-over point (see 3.6) of the entry section (terminal equipment, see 3.2) through the process (processing and terminal equipment, see 3.3 and 3.2) up to the take-over point of the exit section or interface to other lines (terminal equipment). Terminal equipment for: Processing and terminal equipment for: Terminal equipment for: Entry section  Pickling (5.3.5) (1)  Pre-treatment (5.3.6) (1)  Hot dipping (5.3.7) (1)  Electro plating (5.3.8) (1)  Tension levelling/scale breaking (5.3.9) (1)  Organic coating by roll coater (5.3.10) (1)  Chemical post-treating (5.3.11) (1)  Annealing (1), (2) (1) it may include also terminal equipment according to 5.2 (2) for annealing lines the requirement for related processing equipment (5.3.5 to 5.3.11) is covered by this standard. The requirements for the furnace of annealing lines are covered by EN 746-1, EN 746-2 and EN 746-3 Exit section This European Standard does not cover:  Furnaces in accordance with EN 746-1, EN 746-2 and EN 746-3;  Dryers and ovens in accordance with EN 1539;  Coil transporting system before take-over-point at the entry section and after take-over-point at the exit section, e. g., hook conveyors, overhead cranes, fork lift and railway trucks a
Povezava na standarde
Povezava Ime Datum
Konsolidira SIST EN 15061:2008/kprA1:2008 - Varnost strojev - Varnostne zahteve za linijske stroje in opremo za obdelavo (kovinskih) trakov 22-dec-2008
Revidiran kSIST FprEN 15061:2020 - Varnost strojev - Varnostne zahteve za linijske stroje in opremo za obdelavo (kovinskih) trakov 06-feb-2019
Konsolidira SIST EN 15061:2008 - Varnost strojev - Varnostne zahteve za linijske stroje in opremo za obdelavo (kovinskih) trakov 01-jan-2009


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi