SIST ISO 8068:2008

Oznaka standarda: SIST ISO 8068:2008
Koda projekta: 00005183
Organizacija: SIST
Naslov (angleški): Lubricants, industrial oils and related products (class L) - Family T (Turbines) -Specification for lubricating oils for turbines
Naslov (slovenski): Maziva, industrijska olja in sorodni proizvodi (skupina L) - Podskupina T (turbine) – Specifikacija za mazalna olja za turbine
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST ISO 8068:2008 angleški jezik Active SIST-F: 65.34 EUR
PDF
Papir
Tehnični odbor: NAD - Naftni proizvodi, maziva in sorodni proizvodi
ICS: 75.100
Status: Objavljen
Objavljen: 01-Apr-2008
Refer. št. objave: Sporočila 2008-04
Referenčna oznaka: ISO 8068:2006
Področje projekta (angleško): This International Standard specifies the minimum requirements for turbine lubricants, as delivered. It specifies the requirements for a wide variety of turbines for power generation, including steam turbines, gas turbines, combined-cycle turbines with a common lubrication system and hydraulic (water driven) turbines. This International Standard does not specify the requirements for wind turbines, which are dealt with in ISO 12925-1[4]. Whilst power generation is the primary application for turbines, steam and gas turbines can also be used to drive rotating equipment, such as pumps and compressors. The lubrication systems of these driven loads can be common to that of the turbine. Turbine installations incorporate complex auxiliary systems requiring lubrication, including hydraulic systems, gearboxes and couplings. Depending upon the design and configuration of the turbine and driven equipment, turbine lubricants can also be used in these auxiliary systems. This International Standard should be read in conjunction with ISO 6743-5[2], the classification of different turbine lubricant types. The following lubricants are considered in this International Standard: - mineral oils; - synthetic lubricants, ester and polyalphaolefin types intended for high-temperature gas turbines; - synthetic lubricants, ester and polyalphaolefin types, environmentally acceptable for use in hydraulic turbines; - fire-resistant phosphate-ester type lubricants.
Povezava na standarde
Povezava Ime Datum
Nadomešča SIST ISO 8068:1996 - Naftni proizvodi in maziva - Naftna mazalna olja za turbine (kategorije ISO-L-TSA in ISO-L-TGA) - Specifikacije 01-Apr-2008


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi