SIST EN ISO 4254-6:2020/A11:2022

SLOVENSKI STANDARD
SIST EN ISO 4254-6:2020/A11:2022
01-januar-2022
Kmetijski stroji - Varnost - 6. del: Škropilnice in naprave za razdeljevanje tekočih
gnojil - Dopolnilo A11 (ISO 4254-6:2020)
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO
4254-6:2020)
Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgeräte (ISO 4254-6:2020)
Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et distributeurs d'engrais liquides
(ISO 4254-6:2020)
Ta slovenski standard je istoveten z: EN ISO 4254-6:2020/A11:2021
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
SIST EN ISO 4254-6:2020/A11:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4254-6:2020/A11:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 4254-6:2020/A11:2022


EN ISO 4254-6:2020/A11
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2021
EUROPÄISCHE NORM
ICS 65.060.40
English Version

Agricultural machinery - Safety - Part 6: Sprayers and
liquid fertilizer distributors (ISO 4254-6:2020)
Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et Landmaschinen - Sicherheit - Teil 6:
distributeurs d'engrais liquides (ISO 4254-6:2020) Pflanzenschutzgeräte (ISO 4254-6:2020)
This amendment A11 modifies the European Standard EN ISO 4254-6:2020; it was approved by CEN on 29 September 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-6:2020/A11:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 4254-6:2020/A11:2022
EN ISO 4254-6:2020/A11:2021 (E)
Contents Page
European foreword . 3
Annex ZA (informative)  Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 4254-6:2020/A11:2022
EN ISO 4254-6:2020/A11:2021 (E)
European foreword
This document (EN ISO 4254-6:2020/A11:2021) has been prepared by Technical Committee CEN/TC
144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 4254-6:2020 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2022, and
conflicting national standards shall be withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 4254-6:2020/A11:2022
EN ISO 4254-6:2020/A11:2021 (E)
Annex ZA
(informative)

Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request "M/396
mandate to CEN and CENELEC for standardisation in the field of machinery" to provide one voluntary
means of conforming to essential r
...