SIST EN 708:1996

Oznaka standarda: SIST EN 708:1996
Koda projekta: 00144026
Organizacija: SIST
Naslov (angleški): Agricultural machinery - Soil working machines with powered tools - Safety
Naslov (slovenski): Kmetijski stroji - Stroji za obdelavo tal z gnanimi delovnimi elementi - Varnost
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 708:1996 angleški jezik Withdrawn SIST-D: 48.40 EUR
PDF
Papir
Tehnični odbor: IMKG - Mehanizacija za kmetijstvo in gozdarstvo
ICS: 65.060.20
Status: Razveljavljen
Objavljen: 01-jun-1996
Refer. št. objave: Sporocila 1996-06-01
Razveljavitev: 01-jul-2010
Referenca razveljavitve: Sporočila 2010-07
Področje projekta (angleško): This standard specifies safety requirements and their verification for the design and construction of soil working machines, mounted or trailed, with tools powered by the engine of the tractor or by an auxiliary motor. It is applicable regardless of the type of movement of the tools. This standard is not applicable to: - spading machines; - pedestrian controlled soil working machines; - machines where the tools are driven by movement of the machine over the ground; - machines fitted with a retractable device, making them capable of working between two successive plants in the same row. It describes methods for the elimination or reduction of risks which need specific requirements for soil working machines with powered tools. It does not deal with general hazards particularly general hazards related to mobility. These apects will be dealt with in another standard produced by CEN/TC 144 (see introduction). In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with. Note: The measures for safeguarding for the PTO shaft are dealt with in the 'Common requirements' standard being prepared by CEN/TC 144. Environmental aspects have not been considered in this standard. This standard applies primarily to machines which are manufactured after the date of issue of the standard.
Povezava na standarde
Povezava Ime Datum
Dopolnjen z SIST EN 708:1996/A1:2001 - Kmetijski stroji - Stroji za obdelavo tal z gnanimi delovnimi elementi - Varnost 22-dec-2008
Nadomeščen z SIST EN ISO 4254-5:2010 - Kmetijski stroji - Varnost - 5. del: Gnani stroji za obdelavo tal (ISO 4254-5:2008) 01-jul-2010


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi