Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm < D < 250 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Round bars, hot rolled
in steel
Normal tolerances
Diameter 6 mm * D * 250 mm
for aerospace applications.

Luft- und Raumfahrt - Rundstangen, warmgewalzt aus Stahl - Normale Toleranzen - Durchmesser 6 mm L D L 250 mm - Maße

Diese Norm legt die Maße und Toleranzen von
Rundstangen, warmgewalzt
aus Stahl
Normale Toleranzen
Durchmesser 6 mm * D * 250 mm
für die Luft- und Raumfahrt fest.

Série aérospatiale - Barres rondes, laminées a chaud en acier - Tolérances normales - Diametres 6 mm < D < 250 mm - Dimensions

La présente norme spécifie les dimensions et les tolérances des :
Barres rondes, laminées a chaud
en acier
Tolérances normales
Diametres 6 mm L D L 250 mm
pour applications aérospatiales.

Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm < D < 250 mm - Dimensions

General Information

Status
Published
Publication Date
30-Apr-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004

Buy Standard

Standard
EN 3145:2004
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm < D < 250 mm - DimensionsLuft- und Raumfahrt - Rundstangen, warmgewalzt aus Stahl - Normale Toleranzen - Durchmesser 6 mm L D L 250 mm - MaßeSérie aérospatiale - Barres rondes, laminées a chaud en acier - Tolérances normales - Diametres 6 mm < D < 250 mm - DimensionsAerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm < D < 250 mm - Dimensions49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 3145:2001SIST EN 3145:2004en01-maj-2004SIST EN 3145:2004SLOVENSKI
STANDARD



SIST EN 3145:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3145December 2001ICS 49.025.10English versionAerospace series - Round bars, hot rolled in steel - Normaltolerances - Diameter 6 mm
D
250 mm - DimensionsSérie aérospatiale - Barres rondes, laminées à chaud enacier - Tolérances normales - Diamètres 6 mm
D
250mm - DimensionsLuft- und Raumfahrt - Rundstangen, warmgewalzt ausStahl - Normale Toleranzen - Durchmesser 6 mm
D 250 mm - MaßeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3145:2001 ESIST EN 3145:2004



EN 3145:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn atthe latest by June 2002.A
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.