Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing

This European Standard specifies requirements for steel wire welded mesh panels for fencing. The panels are used for fencing parks, schools, sport stadia, public buildings, factories, airports, military sites, etc. This European Standard specifies the general characteristics of welded mesh supplied as panels and recommended coatings, properties and tolerances. This European Standard is applicable to panels made from round or shaped wires not thicker than 10 mm. The panels have round, rectangular or triangular vertical wires and single or double horizontal wires. The use of V-shaped vertical wires is optional.

Stahldraht und Drahterzeugnisse für Zäune - Teil 7: Geschweisste Paneele für Zäune

Diese Europäische Norm legt die Anforderungen für geschweißte Gittermatten aus Stahldraht für Zäune fest. Die Gittermatten finden Einsatz bei der Umzäunung von Parkanlagen, Schulen, Sportstadien, öffentlichen Gebäuden, Fabriken, Flughäfen, militärischen Einrichtungen usw.
Diese Europäische Norm legt die allgemeinen Eigenschaften von geschweißten Gittern, die als Gittermatten geliefert werden, sowie die empfohlenen Beschichtungen, Eigenschaften und Toleranzen fest. Diese Europäische Norm gilt für Gittermatten aus Rund  oder Formdrähten, die nicht dicker als 10 mm sind.
Die Gittermatten bestehen aus vertikalen Drähten mit rundem, rechteckigem oder dreieckigem Querschnitt und horizontalen Einzel- oder Doppeldrähten. Die Verwendung von V förmigen vertikalen Drähten ist wahlweise freigestellt.

Fils et produits tréfilés en acier pour clôtures - Partie 7: Panneaux en acier soudés pour clôturage

La présente Norme européenne spécifie les prescriptions relatives aux panneaux grillagés en acier soudés destinés au clôturage. Les panneaux sont utilisés pour clôturer des parcs, des écoles, des stades de sport, des bâtiments publics, des usines, des aéroports, des sites militaires, etc.
La présente Norme européenne spécifie les caractéristiques générales du grillage soudé livré en panneaux, ainsi que les revêtements, caractéristiques et tolérances recommandés. Elle s’applique aux panneaux fabriqués à partir de fils ronds ou profilés de diamètre ou épaisseur inférieur(e) ou égal(e) à 10 mm.
Les panneaux ont des fils verticaux ronds, rectangulaires ou triangulaires et des fils simples horizontaux ou doubles horizontaux. L’utilisation de fils verticaux en V est facultative.

Jeklena žica in žični izdelki za ograje - 7. del: Iz jeklenih žic zvarjene ograjne plošče

Ta evropski standard določa zahteve za iz jeklenih žic zvarjene ograjne plošče. Plošče se uporabljajo za ograjene parke, šole, športne stadione, javne zgradbe, tovarne, letališča, vojaške objekte idr. Ta evropski standard določa splošne značilnosti zvarjenih mrež, oblikovane v ploščo, in priporočene prevleke, lastnosti in tolerance. Ta evropski standard velja za plošče, ki so narejene iz okrogle ali oblikovane žice, ki ni debelejša od 10 mm. Plošče imajo okrogle, pravokotne ali trikotne navpične žice in enojne ali dvojne vodoravne žice. Uporaba navpičnih žic oblike V je izbirna.

General Information

Status
Published
Public Enquiry End Date
01-Feb-2009
Publication Date
03-Feb-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
23-Jan-2013
Due Date
30-Mar-2013
Completion Date
04-Feb-2013

Relations

Buy Standard

Standard
EN 10223-7:2013
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SORãþHStahldraht und Drahterzeugnisse für Zäune - Teil 7: Geschweisste Paneele für ZäuneFils et produits tréfilés en acier pour clôtures - Partie 7: Panneaux en acier soudés pour clôturageSteel wire and wire products for fences - Part 7: Steel wire welded panels for fencing91.090Konstrukcije zunaj stavbExternal structures77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10223-7:2012SIST EN 10223-7:2013en,fr,de01-marec-2013SIST EN 10223-7:2013SLOVENSKI
STANDARDSIST EN 10223-7:20031DGRPHãþD



SIST EN 10223-7:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10223-7
November 2012 ICS 77.140.65 Supersedes EN 10223-7:2002English Version
Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
Fils et produits tréfilés en acier pour clôtures et grillages - Partie 7: Panneaux en acier soudés pour clôturage
Stahldraht und Drahterzeugnisse für Zäune und Drahtgeflechte - Teil 7: Geschweißte Paneele für Zäune This European Standard was approved by CEN on 13 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10223-7:2012: ESIST EN 10223-7:2013



EN 10223-7:2012 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .54Information to be obtained from the purchaser .65Designation .76Manufacture .76.1Base metal .76.2Fabrication .77Requirements .77.1Tensile strength .77.2Size tolerances .87.2.1Round wires .87.2.2Other shapes .87.3Mesh dimensions and tolerance .87.4Coatings .87.4.1Zinc and zinc alloy coatings .87.4.2Organic coating .87.5Weld shear strength .97.6Stiffness .98Sampling .99Tests on panels .99.1Tensile test .99.2Wire dimension . 109.3Coating test methods . 109.3.1Zinc or zinc alloy coating of wire before fabrication. 109.3.2Hot dip zinc or zinc alloy coating by batch process (panels) . 109.3.3Organically coated wire after fabrication . 109.4Weld shear strength . 109.5Stiffness . 1110Inspection . 1111Packaging . 11Annex A (normative)
Weld shear strength test method (welded mesh) . 12Bibliography . 14 SIST EN 10223-7:2013



EN 10223-7:2012 (E) 3 Foreword This document (EN 10223-7:2012) has been prepared by Technical Committee ECISS/TC 106 “Wire rod and wires”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10223-7:2002. EN 10223 "Steel wire and wire products for fencing and netting" consists of the following parts:  Part 1: Zinc and zinc-alloy coated steel barbed wire  Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes  Part 3: Hexagonal steel wire mesh products for engineering purposes  Part 4: Steel wire welded mesh fencing  Part 5: Steel wire woven hinged joint and knotted mesh fencing  Part 6: Steel wire chain link fencing  Part 7: Steel wire welded panels for fencing  Part 8: Welded mesh gabion products The document has been technically updated. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 10223-7:2013



EN 10223-7:2012 (E) 4 1 Scope This European Standard specifies requirements for steel wire welded mesh panels for fencing. The panels are used for fencing parks, schools, sport stadia, public buildings, factories, airports, military sites, etc. This European Standard specifies the general characteristics of welded mesh supplied as panels and recommended coatings, properties and tolerances. This European Standard is applicable to panels made from round or shaped wires not thicker than 10 mm. The panels have round, rectangular or triangular vertical wires and single or double horizontal wires. The use of V-shaped vertical wires is optional. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10021, General technical delivery conditions for steel products EN 10204, Metallic products — Types of inspection documents EN 10218-1, Steel wire and wire products — General — Part 1: Test methods EN 10218-2:2012, Steel wire and wire products — General — Part 2: Wire dimensions and tolerances EN 10244-2:2009, Steel wire and wire products — Non-ferrous metallic coatings on steel wire — Part 2: Zinc or zinc alloy coatings EN 10245-1, Steel wire and wire products — Organic coatings on steel wire — Part 1: General rules EN 10245-2, Steel wire and wire products — Organic coatings on steel wire — Part 2: PVC finished wire EN 10245-3, Steel wire and wire products — Organic coatings on steel wire — Part 3: PE coated wire EN 10245-4, Steel wire and wire products — Organic coatings on steel wire — Part 4: Polyester coated wire EN ISO 1461, Hot dip galvanised coatings on fabricated iron and steel articles — Specifications and test methods (ISO 1461) EN ISO 4892-1, Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance (ISO 4892-1) EN ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps (ISO 4892-2) EN ISO 4892-3, Plastics — Methods of exposure to labor
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.