Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C

This standard specifies the characteristics of bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated.
Classification: 900 MPa ) / 235 °C ) .

Luft- und Raumfahrt - Metrische Sechskantschrauben, kurzes Gewinde, aus legiertem Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C

Diese Norm legt die Eigenschaften von Sechskantschrauben mit kurzem Gewinde, aus legiertem Stahl, verkadmet, fest.
Klasse: 900 MPa ) / 235 °C ).

Série aérospatiale - Vis métrique à tête hexagonale normale, fût normal à tolérance large, filetage court, en acier allié, cadmiées - Classification: 900 MPa (à température ambiante)/235 °C

Aeronavtika - Metrični sorniki, normalna šestroba glava, široka toleranca, kratek navoj, iz legiranega jekla, prevlečeni s kadmijem - Klasifikacija: 900 MPa (pri temperaturi okolice)/235 °C

General Information

Status
Published
Publication Date
26-Jan-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Jan-2009
Due Date
26-Mar-2009
Completion Date
27-Jan-2009

Relations

Buy Standard

Standard
EN 2889:2009
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Metrische Sechskantschrauben, kurzes Gewinde, aus legiertem Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °CSérie aérospatiale - Vis métrique à tête hexagonale normale, fût normal à tolérance large, filetage court, en acier allié, cadmiées - Classification: 900 MPa (à température ambiante)/235 °CAerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 2889:2006SIST EN 2889:2009en,de01-marec-2009SIST EN 2889:2009SLOVENSKI
STANDARDSIST EN 2889:20011DGRPHãþD



SIST EN 2889:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2889
July 2006 ICS 49.030.20 Supersedes EN 2889:1995 English Version
Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
Série aérospatiale - Vis à tête hexagonale normale, fût normal à tolérance large, filetage court, en acier allié, cadmiées - Classification: 900 MPa (à température ambiante)/235 °C
Luft- und Raumfahrt - Sechskantschrauben, kurzes Gewinde, aus legiertem Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C This European Standard was approved by CEN on 13 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2889:2006: ESIST EN 2889:2009



EN 2889:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.5 4 Designation.9 5 Marking.9 6 Technical specification.9
SIST EN 2889:2009



EN 2889:2006 (E) 3 Foreword This European Standard (EN 2889:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. This document supersedes EN 2889:1995. SIST EN 2889:2009



EN 2889:2006 (E) 4 1 Scope This standard specifies the characteristics of bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa1) / 235 °C2).
2 Normative references The following referenced documents are indispensable for the application of this document. For date
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.