SIST EN 2278:2015
(Main)Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 150 mm
Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 150 mm
This standard specifies the requirements relating to:
Steel X12CrNiMoV12-3 (1.4933)
900 MPa ≤ Rm ≤ 1 100 MPa
Bars
De ≤ 150 mm
for aerospace applications.
Luft- und Raumfahrt - Stahl X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Stangen - De ≤ 150 mm
Série aérospatiale - Acier X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Barres - De ≤ 150 mm
Aeronavtika - Jeklo X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Palice - De ≤ 150 mm
Ta standard določa zahteve glede:
jekla X12CrNiMoV12-3 (1.4933),
900 MPa ≤ Rm ≤ 1100 MPa,
palice,
De ≤ 150 mm,
za uporabo v aeronavtiki.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2278:2015
01-januar-2015
$HURQDYWLND-HNOR;&U1L0R903D”5P”03D3DOLFH
'H”PP
$HURVSDFHVHULHV6WHHO;&U1L0R903D”5P”03D
%DUV'H”PP
/XIWXQG5DXPIDKUW6WDKO;&U1L0R903D”5P”03D
6WDQJHQ'H”PP
6pULHDpURVSDWLDOH$FLHU;&U1L0R903D”5P”03D
%DUUHV'H”PP
Ta slovenski standard je istoveten z: EN 2278:2014
ICS:
49.025.10 Jekla Steels
SIST EN 2278:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 2278:2015
---------------------- Page: 2 ----------------------
SIST EN 2278:2015
EUROPEAN STANDARD
EN 2278
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 49.025.10
English Version
Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤
Rm ≤ 1 100 MPa - Bars - De ≤ 150 mm
S?ie a?ospatiale - Acier X12CrNiMoV12-3 (1.4933) - 900 Luft- und Raumfahrt - Stahl X12CrNiMoV12-3 (1.4933) -
MPa ≤ Rm ≤ 1 100 MPa - Barres - De ≤ 150 mm 900 MPa ≤ Rm ≤ 1 100 MPa - Stangen - De ≤ 150 mm
This European Standard was approved by CEN on 28 June 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2278:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2278:2015
EN 2278:2014 (E)
Contents
Page
Foreword. 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
2
---------------------- Page: 4 ----------------------
SIST EN 2278:2015
EN 2278:2014 (E)
Foreword
This document (EN 2278:2014) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2015, and conflicting national standards shall be
withdrawn at the latest by April 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.