Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading

This European Standard is applicable to the cap used to provide protection and end closing for the adaptor for bottom loading and unloading of tanks for the transport of dangerous goods. It specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR 1) (flammable liquids) that have a vapour pressure not exceeding 110 kPa at 50 °C, including petrol, and that are not sub-classified as toxic or corrosive.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung - Kappe für VK-Kupplung für Untenbefüllung und -entladung

Diese Europäische Norm gilt für die Schutzkappe, die als Schutzeinrichtung und Endverschluss für VK-Kupplungen zur Befüllung und Entladung von unten dient, und legt die Leistungsanforderungen, kritischen Abmessungen und Prüfungen fest, die zur Verifizierung notwendig sind, ob die Ausrüstung mit der vorliegenden Norm übereinstimmt. Die in dieser Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 des ADR – Europäisches Übereinkommen über die internationale Beförderung gefährlicher Güter auf der Straße – (entzündbare flüssige Stoffe) geeignet, deren Dampfdruck bei 50 °C höchstens 110 kPa beträgt (einschließlich Ottokraftstoff) und die nicht als giftig oder ätzend eingestuft sind.

Citernes destinées au transport de matières dangereuses - Equipement de service pour citernes - Bouchon pour l'adaptateur de chargement et de déchargement par le bas

La présente Norme européenne s'applique au bouchon utilisé pour assurer la protection et une fermeture supplémentaire de l'adaptateur de chargement et de déchargement par le bas. Elle spécifie les exigences de performance, les dimensions essentielles et les essais à réaliser pour vérifier la conformité des équipements à la présente norme.
L’équipement spécifié dans la présente norme est adapté à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l'ADR - Accord européen relatif au transport international des marchandises dangereuses par route - (liquides inflammables) dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C, y compris l’essence, et qui n’appartiennent à aucune sous-classification des produits toxiques ou corrosifs.

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje - Kapa priključka za polnjenje in praznjenje s spodnje strani

Ta evropski standard se uporablja za kapo, ki se uporablja za zagotavljanje zaščite in zapiranja za priključek za polnjenje in praznjenje cistern za prevoz nevarnih snovi s spodnje strani. Določa zahteve glede zmogljivosti, kritične mere in preskuse, potrebne za preverjanje skladnosti opreme s tem evropskim standardom. Oprema, ki jo določa ta evropski standard, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR 1) (vnetljive tekočine), katerih parni tlak ne presega 110 kPa pri 50 °C, vključno z motornim bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.

General Information

Status
Published
Public Enquiry End Date
09-Jul-2011
Publication Date
17-Nov-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Oct-2013
Due Date
22-Dec-2013
Completion Date
18-Nov-2013

Buy Standard

Standard
EN 16249:2013
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung - Kappe für VK-Kupplung für Untenbefüllung und -entladungCiternes destinées au transport de matières dangereuses - Equipement de service pour citernes - Bouchon pour l'adaptateur de chargement et de déchargement par le basTanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 16249:2013SIST EN 16249:2013en,fr,de01-december-2013SIST EN 16249:2013SLOVENSKI
STANDARD



SIST EN 16249:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16249
August 2013 ICS 23.020.20 English Version
Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading
Citernes destinées au transport de matières dangereuses -Equipement de service - Chapeau pour l'adapteur pour le chargement et déchargement par le bas
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung - Kappe für VK-Kupplung für Untenbefüllung und -entladung This European Standard was approved by CEN on 29 June 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16249:2013: ESIST EN 16249:2013



EN 16249:2013 (E) 2 Contents Page Foreword . 3 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Functions . 6 5 Design characteristics . 7 5.1 General . 7 5.2 Pressure rating . 7 5.3 Dimensions. 7 5.4 Mounting . 7 5.5 Temperature range . 7 5.6 Materials of construction . 7 5.7 Electrical resistance . 7 5.8 Attachment . 7 6 Tests . 8 6.1 General . 8 6.2 Production tests . 8 6.3 Type tests . 8 7 Marking . 9 8 Installation, operating and maintenance recommendations . 9
SIST EN 16249:2013



EN 16249:2013 (E) 3 Foreword This document (EN 16249:2013) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn at the latest by February 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This European Standard forms part of a coherent standards programme about service equipment of tanks for transport of liquid dangerous goods with vapour pressure not exceeding 110 kPa (absolute pressure) at 50 °C and of petrol. That programme comprises the following European Standards: — EN 13081, Tanks for transport of dangerous goods — Service equipment for tanks — Vapour collection adaptor and coupler; — EN 13082, Tanks for transport of dangerous goods — Service equipment for tanks — Vapour transfer valve; — EN 13083, Tanks for transport of dangerous goods — Service equipment for tanks — Adaptor for bottom loading and unloading; — EN 13308, Tanks for transport of dangerous goods — Service equipment for tanks — Non pressure balanced footvalve; — EN 13314, Tanks for transport of dangerous goods — Service equipment for tanks — Fill hole cover; — EN 13315, Tanks for transport of dangerous goods — Service equipment for tanks — Gravity discharge coupler; — EN 13316, Tanks for transport of dangerous goods — Service equipment for tanks — Pressure balanced footvalve; — EN 13317, Tanks for transport of dangerous goods — Se
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.